Ampere-hour

An ampere-hour or amp-hour (symbol Ah, AHr, A·h, A h) is a unit of electric charge, with sub-units milliampere-hour (mAh) and milliampere second (mAs). One ampere-hour is equal to 3600 coulombs. The ampere-hour is frequently used in measurements of electrochemical systems such as electroplating and electrical batteries. The commonly seen milliampere-hour (mAh or mA·h) is one-thousandth of an ampere-hour (3.6 coulombs).

$\mathrm {Ah} =(3600\,\mathrm {s} )(\mathrm {A} )=3600\,\mathrm {s} {\Bigg (}{\frac {\mathrm {C} }{\mathrm {s} }}{\Bigg )}=3600\,\mathrm {C}$

A milliampere second (mAs or mA·s) is a unit of measure used in X-ray imaging diagnostic imaging and radiation therapy. This quantity is proportional to the total X-ray energy produced by a given X-ray tube operated at a particular voltage. The same total dose can be delivered in different time periods depending on the X-ray tube current.

The Faraday constant is the charge on one mole of electrons; approximately equal to 26.8 ampere-hours. It is used in electrochemical calculations.

An ampere-hour is not a unit of energy. In a battery system, for example, accurate calculation of the energy delivered requires integration of the power delivered (product of instantaneous voltage and instantaneous current) over the discharge interval. Generally, the battery voltage varies during discharge; an average value or nominal value may be used to approximate the integration of power.