Jump to content

Capping inversion

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by TheAustinMan (talk | contribs) at 17:56, 22 May 2022 (top: Some notes about the history of relating capping inversions to severe weather). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A capping inversion limits the vertical development of clouds. In this image taken near Kreuzberg (Rhön), the inversion is below the top of the mountain tops.
Diagram showing the daily changes to the capping inversion on top of Earth's planetary boundary layer.

A capping inversion is an elevated inversion layer that caps a convective planetary boundary layer.

The boundary layer is the part of the atmosphere which is closest to the ground. Normally, the sun heats the ground, which in turn heats the air just above it. Thermals form when this warm air rises into the cold air (warm air is less dense than cold air), a process called convection. A convective layer such as this has the potential for cloud formation, since condensation occurs as the warm air rises and cools.

An inversion occurs when the normal temperature (warm air below, cold air above) profile is reversed, creating a stable configuration of dense, cold air sitting below lighter, warm air. An elevated inversion layer is thus a region of warm air above a region of cold air, but higher in the atmosphere (generally not touching the surface).

A capping inversion occurs when there is a boundary layer with a normal temperature profile (warm air rising into cooler air) and the layer above that is an inversion layer (cooler air below warm air). Cloud formation from the lower layer is "capped" by the inversion layer. If the capping inversion layer or "cap" is too strong (too close to the surface), it will prevent thunderstorms from developing. A strong cap can result in foggy conditions.

However, if the air at the surface is unstable enough, strong updrafts can be forced through the capping inversion. This selective process of only allowing the strongest updrafts to form thunderstorms often results in outbreaks of severe weather. The role of capping inversions in bolstering the intensity of severe weather was realized in conceptual models that were developed by atmospheric science researchers in the late 1960s and had been recognized as a characteristic of tornado-producing airmasses as early as 1954.[1][2]

See also


  1. ^ Carlson, Toby N.; Farrell, Robert J. (1983). "The Lid Strength as an Aid in Predicting Severe Local Storms" (PDF). National Weather Digest. 8 (2). National Weather Association: 27–39. Retrieved 22 May 2022.
  2. ^ Banacos, Peter C.; Ekster, Michael L. (1 August 2010). "The Association of the Elevated Mixed Layer with Significant Severe Weather Events in the Northeastern United States*". Weather and Forecasting. 25 (4). American Meteorological Society: 1082–1102. doi:10.1175/2010WAF2222363.1. Free access icon