Iodine–starch test
![]() Schematic view of I3− ions embedded in amylose helix | |
Classification | Colorimetric method |
---|---|
Analytes | Starch |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7f/Iodl%C3%B6sung_01.jpg/220px-Iodl%C3%B6sung_01.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/bd/Iod-St%C3%A4rke-Test.jpg/220px-Iod-St%C3%A4rke-Test.jpg)
The iodine–starch test is a chemical reaction that is used to test for the presence of starch or for iodine. The combination of starch and iodine is intensely blue-black.[1][2]
The interaction between starch and the triiodide anion (I−
3) is the basis for iodometry.
History and principles
The iodine–starch test was first described by J. J. Colin and H. F. Gaultier de Claubry,[3] and independently by F. Stromeyer,[4] in 1814.[5]
The triiodide anion instantly produces an intense blue-black colour upon contact with starch. The intensity of the colour decreases with increasing temperature and with the presence of water-miscible organic solvents such as ethanol. The test cannot be performed at very low pH due to the hydrolysis of the starch under these conditions.[6] It is thought that the iodine–iodide mixture combines with the starch to form an infinite polyiodide homopolymer. This was rationalized through single crystal X-ray crystallography and comparative Raman spectroscopy.[7]
Starch as an indicator
Starch is often used in chemistry as an indicator for redox titrations where triiodide is present.[1] Starch forms a very dark blue-black complex with triiodide. However, the complex is not formed if only iodine or only iodide (I−) is present. The colour of the starch complex is so deep, that it can be detected visually when the concentration of the iodine is as low as 20 µM at 20 °C.[8] During iodine titrations, concentrated iodine solutions must be reacted with some titrant, often thiosulfate, in order to remove most of the iodine before the starch is added. This is due to the insolubility of the starch–triiodide complex which may prevent some of the iodine reacting with the titrant. Close to the endpoint, the starch is added, and the titration process is resumed taking into account the amount of thiosulfate added before adding the starch.
The color change can be used to detect moisture or perspiration, as in the Minor test or starch–iodine test.
See also
References
- ^ a b Cochran, Beverly; Lunday, Deborah; Miskevich, Frank (2008). "Kinetic Analysis of Amylase Using Quantitative Benedict's and Iodine Starch Reagents". Journal of Chemical Education. 85 (3): 401. Bibcode:2008JChEd..85..401C. doi:10.1021/ed085p401.
- ^ Naiman, Barnet (1937). "Preservation of starch indicator". Journal of Chemical Education. 14 (3): 138. Bibcode:1937JChEd..14..138N. doi:10.1021/ed014p138.1.
- ^ Colin, J. J.; Gaultier de Clauby, H. F. (1814). "Mémoire sur les Combinaisons de l'Iode avec les Substances Végétales et Animales". Annales de Chimie. 90: 87–100.
- ^ Stromeyer, F. (1815). "Ein sehr empfindliches Reagens für Jodine, aufgefunden in der Stärke (Amidon)" [A very sensitive reagent for iodines, found in starch (amidone)]. Annalen der Physik. 49 (1–2): 146–153. Bibcode:1815AnP....49..146S. doi:10.1002/andp.18150490108.
- ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
- ^ "Iodine Test for Starch". Brilliant Biology Student Master Biology Labs. Retrieved 2015-12-01.
- ^ Madhu, Sheri; Evans, Hayden A.; Doan-Nguyen, Vicky V. T.; Labram, John G.; Wu, Guang; Chabinyc, Michael L.; Seshadri, Ram; Wudl, Fred (4 July 2016). "Infinite Polyiodide Chains in the Pyrroloperylene-Iodine Complex: Insights into the Starch–Iodine and Perylene–Iodine Complexes". Angewandte Chemie International Edition. 55 (28): 8032–8035. doi:10.1002/anie.201601585. PMID 27239781.
- ^ Bertrand, Gary. "Iodine Clock Reaction". Missouri University of Science and Technology. Retrieved 2019-05-18.
Further reading
- Vogel's Textbook of Quantitative Chemical Analysis, 5th edition.
External links
- How does starch indicate iodine? General Chemistry Online
- Iodine test at Braukaiser
- Titrations.info: Potentiometric titration--Solutions used in iodometric titrations