Jump to content

MV Chimacum

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Llammakey (talk | contribs) at 18:45, 10 February 2022 (copyedit). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Chimacum parked at Colman Dock in Downtown Seattle shortly after she was accepted by Washington State Ferries in April 2017
History
NameChimacum
OwnerWashington State Department of Transportation
OperatorWashington State Ferries
Port of registryUnited States Seattle, Washington
RouteSeattle–Bremerton
OrderedSpring 2014
BuilderVigor Industrial, Seattle, Washington
Cost$135 million (approximate)
Laid downDecember 9, 2014
LaunchedJuly 8, 2016
ChristenedSeptember 14, 2016
AcquiredApril 7, 2017
Maiden voyageMay 24, 2017 (temporary)
In serviceJune 23, 2017 (official)
Identification
StatusIn service
General characteristics
Class and typeOlympic-class auto/passenger ferry
Displacement4,363.77 long tons (4,433.80 t)
Length362 ft 3 in (110.4 m)
Beam83 ft 2 in (25.3 m)
Draft18 ft (5.5 m)
Depth24 ft 6 in (7.5 m)
Decks5 (2 vehicle decks, passenger deck, sun deck, nav bridge deck)
Deck clearance16 ft (4.9 m)
Installed power6,000 hp (4,500 kW) total from two EMD 12-710G7C diesel engines
PropulsionDiesel
Speed17 knots (31 km/h; 20 mph)
Capacity
  • 1,500 passengers
  • 144 vehicles (max 34 tall vehicles)
Crew14 (12 with sun deck closed)
NotesSource: [1]

The MV Chimacum is the third vessel of the Olympic-class auto ferries for the Washington State Ferries system. The ship was built by Vigor Industrial at their shipyard in Seattle, Washington and entered service on the Seattle–Bremerton route in 2017.[2]

Description and design

The Chimacum makes her first public arrival in Seattle after her first trip from Bremerton to Seattle with passengers on board

The Olympic-class auto ferries, also known as the 144 Car Ferries, are based on the Issaquah design.[2] They measure 362 feet 0 inches (110.34 m) long overall[3] and 335 ft 3 in (102.18 m) between perpendiculars[4] with a beam at the lower vehicle deck of 83 ft 4 in (25.40 m) and a draft at design load waterline of 16 ft 6 in (5.03 m). The vessels have a displacement at design load waterline of 4,320 long tons (4,390 t).[3]

Ferries of the Olympic class are powered by two Electro-Motive Diesel (EMD) two-stroke 12-710G7C diesel engines, each mounted at either end of the ferry turning a propeller at each end of the ship[5] creating 6,000 shaft horsepower (4,500 kW) total.[3] This gives the ships a maximum speed of 17 knots (31 km/h; 20 mph) and the vessels have capacity for 63,700 US gallons (241,000 L; 53,000 imp gal) of diesel fuel. The Olympic-class ferries were designed with two car decks, a sun deck and a passenger deck. They can load up to 144 automobiles, using a ramp that is three lanes wide. The ferries can embark 1,500 persons with seating for 1,300.[3]

Construction and career

The Olympic class is the result of the Washington State Department of Transportation requiring replacements for its aging ferry fleet. Funding for a third Olympic-class vessel was authorized in the Spring 2014 session of the Washington State Legislature, and the keel laying and first weld took place on December 9, 2014.[2] The name Chimacum, the gathering place of the Chemakum tribe, was chosen by the Washington State Transportation Commission in November 2014.[2]

She was christened on September 14, 2016 by Lynne Griffith, who at the time was serving as the head of the ferries system, the first woman to hold the office. The ceremony took place at the Vigor Industrial shipyard on Seattle's Harbor Island.[2][6] She was delivered to Washington State Ferries on April 7, 2017, with her entry into service, replacing Klahowya, expected in the following months.[7] The vessel cost $123 million approximately.[2] Chimacum was forced into a three-day early temporary service on May 24 after Kitsap suffered a mechanical breakdown and all other vessels were in maintenance until Kaleetan, could replace her on the Seattle–Bremerton run to finish sea trials and training.[8] The vessel entered regular service in June 2017 on the Seattle–Bremerton route.[9] In November 2020, Chimacum was the only ferry servicing the route after emergency repairs were required for fleetmate Spokane.[10]

References

  1. ^ "Chimacum". Washington State Ferries. Retrieved December 17, 2021.{{cite web}}: CS1 maint: url-status (link)
  2. ^ a b c d e f "Ferries – Olympic Class (144-Car) Ferries". Washington State Department of Transportation. Retrieved April 15, 2015.
  3. ^ a b c d "144 Auto Ferry Vessel Map" (PDF). Washington State Ferries. May 8, 2006. Archived from the original (PDF) on March 27, 2009. Retrieved January 20, 2016.
  4. ^ "144 Car Ferries – General Arrangement – Revision C" (PDF). Washington State Department of Transport. April 30, 2008. Archived (PDF) from the original on October 7, 2021. Retrieved October 7, 2021.
  5. ^ "Revitalisation of the Pacific Northwest Ferry Fleet". motorship.com. December 31, 2014. Retrieved October 7, 2021.{{cite web}}: CS1 maint: url-status (link)
  6. ^ Demay, Daniel (September 14, 2016). "Boarding soon: State christens newest ferry, set for Bremerton run next spring". Seattle Post-Intelligencer. Retrieved September 14, 2016.
  7. ^ "Third Olympic Class Ferry Joins WSF fleet". Marine Link. April 7, 2017. Retrieved 7 April 2017.
  8. ^ Friedrich, Ed (May 23, 2017). "Chimacum rushing into emergency service". Kitsap Sun. Retrieved October 7, 2021.{{cite web}}: CS1 maint: url-status (link)
  9. ^ "State christens newest ferry Suquamish". Kitsap News. January 4, 2018. Retrieved October 7, 2021.{{cite web}}: CS1 maint: url-status (link)
  10. ^ "Only one ferry to sail Seattle-Bremerton route this week". mynorthwest.com. November 9, 2020. Retrieved October 7, 2021.{{cite web}}: CS1 maint: url-status (link)