Mill Meece Pumping Station
![]() | This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. (February 2019) |
Mill Meece Pumping Station is a pumping station, located in the village of Millmeece in Staffordshire, England. Its function, powered by steam engines, was to pump water from boreholes to a reservoir in Hanchurch, from which it flows by gravity to supply the Potteries area.
Description
Mill Meece pumping station lies approximately 5 miles west of Stone. It is the second pumping station to be constructed in the area, the first being three miles to the north in the village of Hatton. There are four boreholes on the Mill Meece site from which water is lifted.
Water is raised at Mill Meece by lift pumps which deliver water to an underground tank. From there the water is lifted further by ram pumps. Both the lift and ram pumps are powered by two horizontal tandem compound Corliss valve engines using steam raised by three Lancashire boilers. The efficiency of steam-raising is increased by a Green's economiser.
History
The pumping station was first put to work with one engine, two boreholes and two boilers in 1915 though did not pump to the public water supply until 1919. The second engine pumping from two new boreholes first pumped water in 1928. Both engines continued to operate until 22 December 1979. Water is still pumped from the Mill Meece site by electric pumps, but the steam engines remain in their original location.
Visiting
Mill Meece pumping station is now operated by a charity, the Mill Meece Pumping Station Preservation Trust. The website listed below provides details of when it is open to the public.