Jump to content

Multiple dispatch

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by OlliverWithDoubleL (talk | contribs) at 04:43, 30 August 2022. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Multiple dispatch or multimethods is a feature of some programming languages in which a function or method can be dynamically dispatched based on the run-time (dynamic) type or, in the more general case, some other attribute of more than one of its arguments.[1] This is a generalization of single-dispatch polymorphism where a function or method call is dynamically dispatched based on the derived type of the object on which the method has been called. Multiple dispatch routes the dynamic dispatch to the implementing function or method using the combined characteristics of one or more arguments.

Understanding dispatch

Developers of computer software typically organize source code into named blocks variously called subroutines, procedures, subprograms, functions, or methods. The code in the function is executed by calling it – executing a piece of code that references its name. This transfers control temporarily to the called function; when the function's execution has completed, control is typically transferred back to the instruction in the caller that follows the reference.

Function names are usually selected so as to be descriptive of the function's purpose. It is sometimes desirable to give several functions the same name, often because they perform conceptually similar tasks, but operate on different types of input data. In such cases, the name reference at the function call site is not sufficient for identifying the block of code to be executed. Instead, the number and type of the arguments to the function call are also used to select among several function implementations.

In more conventional, i.e., single-dispatch object-oriented programming languages, when invoking a method (sending a message in Smalltalk, calling a member function in C++), one of its arguments is treated specially and used to determine which of the (potentially many) classes of methods of that name is to be applied. In many languages, the special argument is indicated syntactically; for example, a number of programming languages put the special argument before a dot in making a method call: special.method(other, arguments, here), so that lion.sound() would produce a roar, whereas sparrow.sound() would produce a chirp.

In contrast, in languages with multiple dispatch, the selected method is simply the one whose arguments match the number and type of the function call. There is no special argument that owns the function/method carried out in a particular call.

The Common Lisp Object System (CLOS) is an early and well-known example of multiple dispatch.

Data types

When working with languages that can discriminate data types at compile time, selecting among the alternatives can occur then. The act of creating such alternative functions for compile time selection is usually referred to as overloading a function.

In programming languages that defer data type identification until run time (i.e., late binding), selection among alternative functions must occur then, based on the dynamically determined types of function arguments. Functions whose alternative implementations are selected in this manner are referred to most generally as multimethods.

There is some run-time cost associated with dynamically dispatching function calls. In some languages,[citation needed] the distinction between overloading and multimethods can be blurred, with the compiler determining whether compile time selection can be applied to a given function call, or whether slower run time dispatch is needed.

Use in practice

To estimate how often multiple dispatch is used in practice, Muschevici et al.[2] studied programs that use dynamic dispatch. They analyzed nine applications, mostly compilers, written in six different languages: Common Lisp Object System, Dylan, Cecil, MultiJava, Diesel, and Nice. Their results show that 13–32% of generic functions use the dynamic type of one argument, while 2.7–6.5% of them use the dynamic type of multiple arguments. The remaining 65–93% of generic functions have one concrete method (overrider), and thus are not considered to use the dynamic types of their arguments. Further, the study reports that 2–20% of generic functions had two and 3–6% had three concrete function implementations. The numbers decrease rapidly for functions with more concrete overriders.

Multiple dispatch is used much more heavily in Julia, where multiple dispatch was a central design concept from the origin of the language: collecting the same statistics as Muschevici on the average number of methods per generic function, it was found that the Julia standard library uses more than double the amount of overloading than in the other languages analyzed by Muschevici, and more than 10 times in the case of binary operators.[3]

The data from these papers is summarized in the following table, where the dispatch ratio DR is the average number of methods per generic function; the choice ratio CR is the mean of the square of the number of methods (to better measure the frequency of functions with a large number of methods);[2][3] and the degree of specialization DoS is the average number of type-specialized arguments per method (i.e., the number of arguments that are dispatched on):

Language Average # methods (DR) Choice ratio (CR) Degree of specialization (DoS)
Cecil[2] 2.33 63.30 1.06
Common Lisp (CMU)[2] 2.03 6.34 1.17
Common Lisp (McCLIM)[2] 2.32 15.43 1.17
Common Lisp (Steel Bank)[2] 2.37 26.57 1.11
Diesel[2] 2.07 31.65 0.71
Dylan (Gwydion)[2] 1.74 18.27 2.14
Dylan (OpenDylan)[2] 2.51 43.84 1.23
Julia[3] 5.86 51.44 1.54
Julia (operators only)[3] 28.13 78.06 2.01
MultiJava[2] 1.50 8.92 1.02
Nice[2] 1.36 3.46 0.33

Theory

The theory of multiple dispatching languages was first developed by Castagna et al., by defining a model for overloaded functions with late binding.[4][5] It yielded the first formalization of the problem of covariance and contravariance of object-oriented languages[6] and a solution to the problem of binary methods.[7]

Examples

Distinguishing multiple and single dispatch may be made clearer by an example. Imagine a game that has, among its (user-visible) objects, spaceships and asteroids. When two objects collide, the program may need to do different things according to what has just hit what.

Languages with built-in multiple dispatch

C#

C# introduced support for dynamic multimethods in version 4[8] (April 2010) using the 'dynamic' keyword. The following example demonstrates multimethods. Like many other statically-typed languages, C# also supports static method overloading.[9] Microsoft expects that developers will choose static typing over dynamic typing in most scenarios.[10] The 'dynamic' keyword supports interoperability with COM objects and dynamically-typed .NET languages.

The example below uses features introduced in C# 9 and C# 10.

using static ColliderLibrary;

Console.WriteLine(Collide(new Asteroid(101), new Spaceship(300)));
Console.WriteLine(Collide(new Asteroid(10), new Spaceship(10)));
Console.WriteLine(Collide(new Spaceship(101), new Spaceship(10)));

string Collide(SpaceObject x, SpaceObject y) =>
    x.Size > 100 && y.Size > 100
        ? "Big boom!"
        : CollideWith(x as dynamic, y as dynamic); // Dynamic dispatch to CollideWith method

class ColliderLibrary {
    public static string CollideWith(Asteroid x, Asteroid y) => "a/a";
    public static string CollideWith(Asteroid x, Spaceship y) => "a/s";
    public static string CollideWith(Spaceship x, Asteroid y) => "s/a";
    public static string CollideWith(Spaceship x, Spaceship y) => "s/s";
}

record SpaceObject(int Size);
record Asteroid(int Size) : SpaceObject(Size);
record Spaceship(int Size) : SpaceObject(Size);

Output:

Big boom!
a/s
s/s

Groovy

Groovy is a general purpose Java compatible/interusable JVM language, which, contrary to Java, uses late binding / multiple dispatch.[11]

/*
    Groovy implementation of C# example above
    Late binding works the same when using non-static methods or compiling class/methods statically
    (@CompileStatic annotation)
*/
class Program {
    static void main(String[] args) {
        println Collider.collide(new Asteroid(101), new Spaceship(300))
        println Collider.collide(new Asteroid(10), new Spaceship(10))
        println Collider.collide(new Spaceship(101), new Spaceship(10))
    }
}

class Collider {
    static String collide(SpaceObject x, SpaceObject y) {
        (x.size > 100 && y.size > 100) ? "big-boom" : collideWith(x, y)  // Dynamic dispatch to collideWith method
    }

    private static String collideWith(Asteroid x, Asteroid y) { "a/a" }
    private static String collideWith(Asteroid x, Spaceship y) { "a/s" }
    private static String collideWith(Spaceship x, Asteroid y) { "s/a" }
    private static String collideWith(Spaceship x, Spaceship y) { "s/s"}
}

class SpaceObject {
    int size
    SpaceObject(int size) { this.size = size }
}

@InheritConstructors class Asteroid extends SpaceObject {}
@InheritConstructors class Spaceship extends SpaceObject {}

Common Lisp

In a language with multiple dispatch, such as Common Lisp, it might look more like this (Common Lisp example shown):

(defmethod collide-with ((x asteroid) (y asteroid))
  ;; deal with asteroid hitting asteroid
  )
(defmethod collide-with ((x asteroid) (y spaceship))
  ;; deal with asteroid hitting spaceship
  )
(defmethod collide-with ((x spaceship) (y asteroid))
  ;; deal with spaceship hitting asteroid
  )
(defmethod collide-with ((x spaceship) (y spaceship))
  ;; deal with spaceship hitting spaceship
  )

and similarly for the other methods. Explicit testing and "dynamic casting" are not used.

In the presence of multiple dispatch, the traditional idea of methods as being defined in classes and contained in objects becomes less appealing—each collide-with method above is attached to two different classes, not one. Hence, the special syntax for method invocation generally disappears, so that method invocation looks exactly like ordinary function invocation, and methods are grouped not in classes but in generic functions.

Julia

Julia has built-in multiple dispatch, and it is central to the language design.[3] The Julia version of the example above might look like:

abstract type SpaceObject end

struct Asteroid <: SpaceObject
    size::Int    
end
struct Spaceship <: SpaceObject
    size::Int                  
end              

collide_with(::Asteroid, ::Spaceship) = "a/s"
collide_with(::Spaceship, ::Asteroid) = "s/a"
collide_with(::Spaceship, ::Spaceship) = "s/s"
collide_with(::Asteroid, ::Asteroid) = "a/a"

collide(x::SpaceObject, y::SpaceObject) = (x.size > 100 && y.size > 100) ? "Big boom!" : collide_with(x, y)

Output:

julia> collide(Asteroid(101), Spaceship(300))
"Big boom!"

julia> collide(Asteroid(10), Spaceship(10))
"a/s"

julia> collide(Spaceship(101), Spaceship(10))
"s/s"

Raku

Raku, like Perl, uses proven ideas from other languages, and type systems have shown themselves to offer compelling advantages in compiler-side code analysis and powerful user-side semantics via multiple dispatch.

It has both multimethods, and multisubs. Since most operators are subroutines, it also has multiple dispatched operators.

Along with the usual type constraints, it also has where constraints that allow making very specialized subroutines.

subset Mass of Real where 0 ^..^ Inf; 
role Stellar-Object {
    has Mass $.mass is required;
    method name () returns Str {...};
}
class Asteroid does Stellar-Object {
    method name () { 'an asteroid' }
}
class Spaceship does Stellar-Object {
    has Str $.name = 'some unnamed spaceship';
}
my Str @destroyed = < obliterated destroyed mangled >;
my Str @damaged = « damaged 'collided with' 'was damaged by' »;

# We add multi candidates to the numeric comparison operators because we are comparing them numerically,
# but makes no sense to have the objects coerce to a Numeric type.
# ( If they did coerce we wouldn't necessarily need to add these operators. )
# We could have also defined entirely new operators this same way.
multi sub infix:« <=> » ( Stellar-Object:D $a, Stellar-Object:D $b ) { $a.mass <=> $b.mass }
multi sub infix:« < » ( Stellar-Object:D $a, Stellar-Object:D $b ) { $a.mass < $b.mass }
multi sub infix:« > » ( Stellar-Object:D $a, Stellar-Object:D $b ) { $a.mass > $b.mass }
multi sub infix:« == » ( Stellar-Object:D $a, Stellar-Object:D $b ) { $a.mass == $b.mass }

# Define a new multi dispatcher, and add some type constraints to the parameters.
# If we didn't define it we would have gotten a generic one that didn't have constraints.
proto sub collide ( Stellar-Object:D $, Stellar-Object:D $ ) {*}

# No need to repeat the types here since they are the same as the prototype.
# The 'where' constraint technically only applies to $b not the whole signature.
# Note that the 'where' constraint uses the `<` operator candidate we added earlier.
multi sub collide ( $a, $b where $a < $b ) {
    say "$a.name() was @destroyed.pick() by $b.name()";
}
multi sub collide ( $a, $b where $a > $b ) {
    # redispatch to the previous candidate with the arguments swapped
    samewith $b, $a;
}

# This has to be after the first two because the other ones
# have 'where' constraints, which get checked in the
# order the subs were written. ( This one would always match. )
multi sub collide ( $a, $b ) {
    # randomize the order
    my ($n1, $n2) = ( $a.name, $b.name ).pick(*);
    say "$n1 @damaged.pick() $n2";
}

# The following two candidates can be anywhere after the proto,
# because they have more specialized types than the preceding three.

# If the ships have unequal mass one of the first two candidates gets called instead.
multi sub collide ( Spaceship $a, Spaceship $b where $a == $b ){
    my ($n1, $n2) = ( $a.name, $b.name ).pick(*);
    say "$n1 collided with $n2, and both ships were ",
    ( @destroyed.pick, 'left damaged' ).pick;
}

# You can unpack the attributes into variables within the signature.
# You could even have a constraint on them `(:mass($a) where 10)`.
multi sub collide ( Asteroid $ (:mass($a)), Asteroid $ (:mass($b)) ){
    say "two asteroids collided and combined into one larger asteroid of mass { $a + $b }";
}

my Spaceship $Enterprise .= new(:mass(1),:name('The Enterprise'));
collide Asteroid.new(:mass(.1)), $Enterprise;
collide $Enterprise, Spaceship.new(:mass(.1));
collide $Enterprise, Asteroid.new(:mass(1));
collide $Enterprise, Spaceship.new(:mass(1));
collide Asteroid.new(:mass(10)), Asteroid.new(:mass(5));

Extending languages with multiple-dispatch libraries

JavaScript

In languages that do not support multiple dispatch at the language definition or syntactic level, it is often possible to add multiple dispatch using a library extension. JavaScript and TypeScript do not support multimethods at the syntax level, but it is possible to add multiple dispatch via a library. For example, the multimethod package[12] provides an implementation of multiple dispatch, generic functions.

Dynamically-typed version in JavaScript:

import { multi, method } from '@arrows/multimethod'

class Asteroid {}
class Spaceship {}

const collideWith = multi(
  method([Asteroid, Asteroid], (x, y) => {
    // deal with asteroid hitting asteroid
  }),
  method([Asteroid, Spaceship], (x, y) => {
    // deal with asteroid hitting spaceship
  }),
  method([Spaceship, Asteroid], (x, y) => {
    // deal with spaceship hitting asteroid
  }),
  method([Spaceship, Spaceship], (x, y) => {
    // deal with spaceship hitting spaceship
  }),
)

Statically-typed version in TypeScript:

import { multi, method, Multi } from '@arrows/multimethod'

class Asteroid {}
class Spaceship {}

type CollideWith = Multi & {
  (x: Asteroid, y: Asteroid): void
  (x: Asteroid, y: Spaceship): void
  (x: Spaceship, y: Asteroid): void
  (x: Spaceship, y: Spaceship): void
}

const collideWith: CollideWith = multi(
  method([Asteroid, Asteroid], (x, y) => {
    // deal with asteroid hitting asteroid
  }),
  method([Asteroid, Spaceship], (x, y) => {
    // deal with asteroid hitting spaceship
  }),
  method([Spaceship, Asteroid], (x, y) => {
    // deal with spaceship hitting asteroid
  }),
  method([Spaceship, Spaceship], (x, y) => {
    // deal with spaceship hitting spaceship
  }),
)

Python

Multiple dispatch can be added to Python using a library extension. For example, using the module multimethod.py[13] and also with the module multimethods.py[14] which provides CLOS-style multimethods for Python without changing the underlying syntax or keywords of the language.

from multimethods import Dispatch
from game_objects import Asteroid, Spaceship
from game_behaviors import as_func, ss_func, sa_func
collide = Dispatch()
collide.add_rule((Asteroid, Spaceship), as_func)
collide.add_rule((Spaceship, Spaceship), ss_func)
collide.add_rule((Spaceship, Asteroid), sa_func)
def aa_func(a, b):
    """Behavior when asteroid hits asteroid."""
    # ...define new behavior...
collide.add_rule((Asteroid, Asteroid), aa_func)
# ...later...
collide(thing1, thing2)

Functionally, this is very similar to the CLOS example, but the syntax is conventional Python.

Using Python 2.4 decorators, Guido van Rossum produced a sample implementation of multimethods[15] with a simplified syntax:

@multimethod(Asteroid, Asteroid)
def collide(a, b):
    """Behavior when asteroid hits a asteroid."""
    # ...define new behavior...
@multimethod(Asteroid, Spaceship)
def collide(a, b):
    """Behavior when asteroid hits a spaceship."""
    # ...define new behavior...
# ... define other multimethod rules ...

and then it goes on to define the multimethod decorator.

The PEAK-Rules package provides multiple dispatch with a syntax similar to the above example.[16] It was later replaced by PyProtocols.[17]

The Reg library also supports multiple and predicate dispatch.[18]

Emulating multiple dispatch

C

C does not have dynamic dispatch, so it must be implemented manually in some form. Often an enum is used to identify the subtype of an object. Dynamic dispatch can be done by looking up this value in a function pointer branch table. Here is a simple example in C:

typedef void (*CollisionCase)(void);

void collision_AA(void) { /* handle Asteroid-Asteroid collision  */ };
void collision_AS(void) { /* handle Asteroid-Spaceship collision */ };
void collision_SA(void) { /* handle Spaceship-Asteroid collision */ };
void collision_SS(void) { /* handle Spaceship-Spaceship collision*/ };

typedef enum {
    THING_ASTEROID = 0,
    THING_SPACESHIP,
    THING_COUNT /* not a type of thing itself, instead used to find number of things */
} Thing;

CollisionCase collisionCases[THING_COUNT][THING_COUNT] = {
    {&collision_AA, &collision_AS},
    {&collision_SA, &collision_SS}
};

void collide(Thing a, Thing b) {
    (*collisionCases[a][b])();
}

int main(void) {
    collide(THING_SPACESHIP, THING_ASTEROID);
}

With the C Object System library,[19] C does support dynamic dispatch similar to CLOS. It is fully extensible and does not need any manual handling of the methods. Dynamic message (methods) are dispatched by the dispatcher of COS, which is faster than Objective-C. Here is an example in COS:

#include <stdio.h>
#include <cos/Object.h>
#include <cos/gen/object.h>

// classes

defclass (Asteroid)
// data members
endclass

defclass (Spaceship)
// data members
endclass

// generics

defgeneric (_Bool, collide_with, _1, _2);

// multimethods

defmethod (_Bool, collide_with, Asteroid, Asteroid)
 // deal with asteroid hitting asteroid
endmethod

defmethod (_Bool, collide_with, Asteroid, Spaceship)
 // deal with asteroid hitting spaceship
endmethod

defmethod (_Bool, collide_with, Spaceship, Asteroid)
 // deal with spaceship hitting asteroid
endmethod

defmethod (_Bool, collide_with, Spaceship, Spaceship)
 // deal with spaceship hitting spaceship
endmethod

// example of use

int main(void)
{
  OBJ a = gnew(Asteroid);
  OBJ s = gnew(Spaceship);

  printf("<a,a> = %d\n", collide_with(a, a));
  printf("<a,s> = %d\n", collide_with(a, s));
  printf("<s,a> = %d\n", collide_with(s, a));
  printf("<s,s> = %d\n", collide_with(s, s));

  grelease(a);
  grelease(s);
}

C++

As of 2021, C++ natively supports only single dispatch, though adding multi-methods (multiple dispatch) was proposed by Bjarne Stroustrup (and collaborators) in 2007.[20] The methods of working around this limit are analogous: use either the visitor pattern, dynamic cast or a library:

 // Example using run time type comparison via dynamic_cast

 struct Thing {
     virtual void collideWith(Thing& other) = 0;
 };

 struct Asteroid : Thing {
     void collideWith(Thing& other) {
         // dynamic_cast to a pointer type returns NULL if the cast fails
         // (dynamic_cast to a reference type would throw an exception on failure)
         if (auto asteroid = dynamic_cast<Asteroid*>(&other)) {
             // handle Asteroid-Asteroid collision
         } else if (auto spaceship = dynamic_cast<Spaceship*>(&other)) {
             // handle Asteroid-Spaceship collision
         } else {
             // default collision handling here
         }
     }
 };

 struct Spaceship : Thing {
     void collideWith(Thing& other) {
         if (auto asteroid = dynamic_cast<Asteroid*>(&other)) {
             // handle Spaceship-Asteroid collision
         } else if (auto spaceship = dynamic_cast<Spaceship*>(&other)) {
             // handle Spaceship-Spaceship collision
         } else {
             // default collision handling here
         }
     }
 };

or pointer-to-method lookup table:

#include <cstdint>
#include <typeinfo>
#include <unordered_map>

class Thing {
  protected:
    Thing(std::uint32_t cid) : tid(cid) {}
    const std::uint32_t tid; // type id

    typedef void (Thing::*CollisionHandler)(Thing& other);
    typedef std::unordered_map<std::uint64_t, CollisionHandler> CollisionHandlerMap;

    static void addHandler(std::uint32_t id1, std::uint32_t id2, CollisionHandler handler) {
        collisionCases.insert(CollisionHandlerMap::value_type(key(id1, id2), handler));
    }
    static std::uint64_t key(std::uint32_t id1, std::uint32_t id2) {
        return std::uint64_t(id1) << 32 | id2;
    }

    static CollisionHandlerMap collisionCases;

  public:
    void collideWith(Thing& other) {
        auto handler = collisionCases.find(key(tid, other.tid));
        if (handler != collisionCases.end()) {
            (this->*handler->second)(other); // pointer-to-method call
        } else {
            // default collision handling
        }
    }
};

class Asteroid: public Thing {
    void asteroid_collision(Thing& other)   { /*handle Asteroid-Asteroid collision*/ }
    void spaceship_collision(Thing& other)  { /*handle Asteroid-Spaceship collision*/}

  public:
    Asteroid(): Thing(cid) {}
    static void initCases();
    static const std::uint32_t cid;
};

class Spaceship: public Thing {
    void asteroid_collision(Thing& other)   { /*handle Spaceship-Asteroid collision*/}
    void spaceship_collision(Thing& other)  { /*handle Spaceship-Spaceship collision*/}

  public:
    Spaceship(): Thing(cid) {}
    static void initCases();
    static const std::uint32_t cid; // class id
};

Thing::CollisionHandlerMap Thing::collisionCases;
const std::uint32_t Asteroid::cid = typeid(Asteroid).hash_code();
const std::uint32_t Spaceship::cid = typeid(Spaceship).hash_code();

void Asteroid::initCases() {
    addHandler(cid, cid, CollisionHandler(&Asteroid::asteroid_collision));
    addHandler(cid, Spaceship::cid, CollisionHandler(&Asteroid::spaceship_collision));
}

void Spaceship::initCases() {
    addHandler(cid, Asteroid::cid, CollisionHandler(&Spaceship::asteroid_collision));
    addHandler(cid, cid, CollisionHandler(&Spaceship::spaceship_collision));
}

int main() {
    Asteroid::initCases();
    Spaceship::initCases();

    Asteroid  a1, a2;
    Spaceship s1, s2;

    a1.collideWith(a2);
    a1.collideWith(s1);

    s1.collideWith(s2);
    s1.collideWith(a1);
}

The YOMM2 library[21] provides a fast, orthogonal implementation of open multimethods.

The syntax for declaring open methods is inspired by a proposal for a native C++ implementation. The library requires that the user registers all the classes used as virtual arguments (and their sub-classes), but does not require any modifications to existing code. Methods are implemented as ordinary inline C++ functions; they can be overloaded and they can be passed by pointer. There is no limit on the number of virtual arguments, and they can be arbitrarily mixed with non-virtual arguments.

The library uses a combination of techniques (compressed dispatch tables, collision free integer hash table) to implement method calls in constant time, while mitigating memory usage. Dispatching a call to an open method with a single virtual argument takes only 15–30% more time than calling an ordinary virtual member function, when a modern optimizing compiler is used.

The Asteroids example can be implemented as follows:

#include <yorel/yomm2/keywords.hpp>
#include <memory>

class Thing {
  public:
    virtual ~Thing() {}
};

class Asteroid : public Thing {
};

class Spaceship : public Thing {
};

register_classes(Thing, Spaceship, Asteroid);

declare_method(void, collideWith, (virtual_<Thing&>, virtual_<Thing&>));

define_method(void, collideWith, (Thing& left, Thing& right)) {
    // default collision handling
}

define_method(void, collideWith, (Asteroid& left, Asteroid& right)) {
    // handle Asteroid-Asteroid collision
}

define_method(void, collideWith, (Asteroid& left, Spaceship& right)) {
    // handle Asteroid-Spaceship collision
}

define_method(void, collideWith, (Spaceship& left, Asteroid& right)) {
    // handle Spaceship-Asteroid collision
}

define_method(void, collideWith, (Spaceship& left, Spaceship& right)) {
    // handle Spaceship-Spaceship collision
}

int main() {
    yorel::yomm2::update_methods();

    std::unique_ptr<Thing> a1(std::make_unique<Asteroid>()),
        a2(std::make_unique<Asteroid>());
    std::unique_ptr<Thing> s1(std::make_unique<Spaceship>()),
        s2(std::make_unique<Spaceship>());
    // note: types partially erased

    collideWith(*a1, *a2); // Asteroid-Asteroid collision
    collideWith(*a1, *s1); // Asteroid-Spaceship collision
    collideWith(*s1, *a1); // Spaceship-Asteroid collision
    collideWith(*s1, *s2); // Spaceship-Spaceship collision

    return 0;
}

Stroustrup mentions in The Design and Evolution of C++ that he liked the concept of multimethods and considered implementing it in C++ but claims to have been unable to find an efficient sample implementation (comparable to virtual functions) and resolve some possible type ambiguity problems. He then states that although the feature would still be nice to have, that it can be approximately implemented using double dispatch or a type based lookup table as outlined in the C/C++ example above so is a low priority feature for future language revisions.[22]

D

As of 2021, as do many other object-oriented programming languages, D natively supports only single dispatch. However, it is possible to emulate open multimethods as a library function in D. The openmethods library[23] is an example.

// Declaration
Matrix plus(virtual!Matrix, virtual!Matrix);

// The override for two DenseMatrix objects
@method
Matrix _plus(DenseMatrix a, DenseMatrix b)
{
  const int nr = a.rows;
  const int nc = a.cols;
  assert(a.nr == b.nr);
  assert(a.nc == b.nc);
  auto result = new DenseMatrix;
  result.nr = nr;
  result.nc = nc;
  result.elems.length = a.elems.length;
  result.elems[] = a.elems[] + b.elems[];
  return result;
}

// The override for two DiagonalMatrix objects
@method
Matrix _plus(DiagonalMatrix a, DiagonalMatrix b)
{
  assert(a.rows == b.rows);
  double[] sum;
  sum.length = a.elems.length;
  sum[] = a.elems[] + b.elems[];
  return new DiagonalMatrix(sum);
}

Java

In a language with only single dispatch, such as Java, multiple dispatch can be emulated with multiple levels of single dispatch:

interface Collideable {
    void collideWith(final Collideable other);

    /* These methods would need different names in a language without method overloading. */
    void collideWith(final Asteroid asteroid);
    void collideWith(final Spaceship spaceship);
}

class Asteroid implements Collideable {
    public void collideWith(final Collideable other) {
        // Call collideWith on the other object.
        other.collideWith(this);
   }

    public void collideWith(final Asteroid asteroid) {
        // Handle Asteroid-Asteroid collision.
    }

    public void collideWith(final Spaceship spaceship) {
        // Handle Asteroid-Spaceship collision.
    }
}

class Spaceship implements Collideable {
    public void collideWith(final Collideable other) {
        // Call collideWith on the other object.
        other.collideWith(this);
    }

    public void collideWith(final Asteroid asteroid) {
        // Handle Spaceship-Asteroid collision.
    }

    public void collideWith(final Spaceship spaceship) {
        // Handle Spaceship-Spaceship collision.
    }
}

Run time instanceof checks at one or both levels can also be used.

Support in programming languages

Primary paradigm

Supporting general multimethods

Via extensions

See also

References

  1. ^ Ranka, Sanjay; Banerjee, Arunava; Biswas, Kanad Kishore; Dua, Sumeet; Mishra, Prabhat; Moona, Rajat (2010-07-26). Contemporary Computing: Second International Conference, IC3 2010, Noida, India, August 9–11, 2010. Proceedings. Springer. ISBN 9783642148248.
  2. ^ a b c d e f g h i j k Muschevici, Radu; Potanin, Alex; Tempero, Ewan; Noble, James (2008). Multiple dispatch in practice. OOPSLA '08. Nashville, TN, USA: ACM. pp. 563–582. doi:10.1145/1449764.1449808. ISBN 9781605582153. S2CID 7605233. {{cite book}}: |journal= ignored (help)
  3. ^ a b c d e Bezanson, Jeff; Edelman, Alan; Karpinski, Stefan; Shah, Viral B. (7 February 2017). "Julia: A fresh approach to numerical computing". SIAM Review. 59 (1): 65–98. arXiv:1411.1607. doi:10.1137/141000671. S2CID 13026838.
  4. ^ Castagna, Giuseppe; Ghelli, Giorgio & Longo, Giuseppe (1995). "A calculus for overloaded functions with subtyping". Information and Computation. 117 (1): 115–135. doi:10.1006/inco.1995.1033. Retrieved 2013-04-19.
  5. ^ Castagna, Giuseppe (1996). Object-Oriented Programming: A Unified Foundation. Progress in Theoretical Computer Science. Birkhäuser. p. 384. ISBN 978-0-8176-3905-1.
  6. ^ Castagna, Giuseppe (1995). "Covariance and contravariance: conflict without a cause". ACM Transactions on Programming Languages and Systems. 17 (3): 431–447. CiteSeerX 10.1.1.115.5992. doi:10.1145/203095.203096. S2CID 15402223.
  7. ^ Bruce, Kim; Cardelli, Luca; Castagna, Giuseppe; Leavens, Gary T.; Pierce, Benjamin (1995). "On binary methods". Theory and Practice of Object Systems. 1 (3): 221–242. doi:10.1002/j.1096-9942.1995.tb00019.x. Retrieved 2013-04-19.
  8. ^ "Using type dynamic (C# Programming Guide)". Retrieved 2020-05-14.
  9. ^ "Basic concepts". Retrieved 2020-05-14.
  10. ^ "Dynamic .NET - Understanding the Dynamic Keyword in C# 4". Retrieved 2020-05-14.
  11. ^ Groovy - Multi-methods
  12. ^ @arrows/multimethod Multiple dispatch in JavaScript/TypeScript with configurable dispatch resolution by Maciej Cąderek.
  13. ^ Coady, Aric, multimethod: Multiple argument dispatching., retrieved 2021-01-28
  14. ^ multimethods.py Archived 2005-03-09 at the Wayback Machine, Multiple dispatch in Python with configurable dispatch resolution by David Mertz, et al.
  15. ^ "Five-minute Multimethods in Python".
  16. ^ "PEAK-Rules 0.5a1.dev". Python Package Index. Retrieved 21 March 2014.
  17. ^ "PyProtocols". Python Enterprise Application Kit. Retrieved 26 April 2019.
  18. ^ "Reg". Read the docs. Retrieved 26 April 2019.
  19. ^ "C Object System: A framework that brings C to the level of other high level programming languages and beyond: CObjectSystem/COS". 2019-02-19.
  20. ^ "Report on language support for Multi-Methods and Open-Methods for C ++" (PDF). 2007-03-11. Multiple dispatch – the selection of a function to be invoked based on the dynamic type of two or more arguments – is a solution to several classical problems in object-oriented programming.{{cite web}}: CS1 maint: url-status (link)
  21. ^ yomm2, Fast, Orthogonal Open Multi-Methods for C++ by Jean-Louis Leroy.
  22. ^ Stroustrup, Bjarne (1994). "Section 13.8". The Design and Evolution of C++. Indianapolis, IN, U.S.A: Addison Wesley. Bibcode:1994dec..book.....S. ISBN 978-0-201-54330-8.
  23. ^ openmethods, Open Multi-Methods for D by Jean-Louis Leroy.
  24. ^ "Methods". The Julia Manual. Julialang. Archived from the original on 17 July 2016. Retrieved 11 May 2014.
  25. ^ "Multimethods in C# 4.0 With 'Dynamic'". Retrieved 2009-08-20.
  26. ^ "Cecil Language". Retrieved 2008-04-13.
  27. ^ "Multimethods in Clojure". Retrieved 2008-09-04.
  28. ^ Steele, Guy L. (1990). "28". Common LISP: The Language. Bedford, MA, U.S.A: Digital Press. ISBN 978-1-55558-041-4.
  29. ^ "Background and Goals". Retrieved 2008-04-13.
  30. ^ "Elixir Lang | Getting Started | Modules and functions". Retrieved 2017-11-10.
  31. ^ "The Fortress Language Specification, Version 1.0" (PDF). Archived from the original (PDF) on 2013-01-20. Retrieved 2010-04-23.
  32. ^ "Multimethods in Groovy". Retrieved 2008-04-13.
  33. ^ "Methods – LassoGuide 9.2". Retrieved 2014-11-11.
  34. ^ "Visitor Pattern Versus Multimethods". Retrieved 2008-04-13.
  35. ^ "Nim Manual: Multi-methods". Retrieved 2022-05-03.
  36. ^ "Perl 6 FAQ". Retrieved 2008-04-13.
  37. ^ "How S4 Methods Work" (PDF). Retrieved 2008-04-13.
  38. ^ "Multiple Dispatch in Seed7". Retrieved 2011-04-23.
  39. ^ "TADS 3 System Manual". Retrieved 2012-03-19.
  40. ^ "VB.Net Multiple Dispatch". Retrieved 2020-03-31.
  41. ^ "New Features in C#4.0 and VB.Net 10.0". Retrieved 2020-03-31.
  42. ^ "Notes for Programming Language Experts". Retrieved 2016-08-21.
  43. ^ "Multiple dispatch".