Jump to content

Naniwa Maru

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Citation bot (talk | contribs) at 15:06, 17 October 2020 (Add: work. Removed parameters. Some additions/deletions were actually parameter name changes. | You can use this bot yourself. Report bugs here. | Suggested by AManWithNoPlan | All pages linked from cached copy of User:AManWithNoPlan/sandbox4 | via #UCB_webform_linked 1171/6000). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The Naniwa Maru inside the Osaka Maritime Museum
History
Name
  • Naniwa Maru
  • 浪華丸
Maiden voyage1999
General characteristics
Tonnage90 T
Length30 m
Beam7.4 m
Height27.50 m
PropulsionSail

The Naniwa Maru (浪華丸) is a replica ship of a typical Japanese trader from the Edo period (1603-1868) known as a higaki kaisen. It was built as the main exhibit for the Osaka Maritime Museum, with academic interest which also encouraged sea based testing until it was transferred into the newly built museum.

History

During the Edo period higaki kaisen ships were used to transport basic materials between Osaka and Edo (now Tokyo), up the coast. Materials transported included cotton, oil, paper and medicines.[1]

Naming

The name Naniwa Maru comes from the ancient name for Osaka - Naniwa, and the usual postfix given to Japanese trading vessels, Maru.[2] The type of ship, higaki kaisen (菱垣廻船), originates in the name of the rhomboid-shaped bamboo gunwales, higaki, which helped keep the goods on deck, and kaisen, or "coastal boat".[1]

Construction

The plans for the ship were drawn up on computer, based on the only remaining original drawings dating back to the Bunka epoch (1804-1817).[1] The ship has a length of 30m, is 27.5m high, with a breadth of 7.4m and weighs 90t.[3]

The ship uses a number of different woods in its construction, just as the original ships would have done. Pine, cedar, Japanese cypress and evergreen oak are all used in the construction of the hull and mast, whilst the sail is a cotton canvas known as a matsuemon-ho and there are old Japanese-style nails such as nuikugi and toshikugi.[1]

Sea trials

Sea trials were conducted in Osaka Bay between 20 July and 1 August 1999, the first sea trials of a replica ship in Japan.[1] These were run under the supervision of Nomoto Kensaku, emeritus professor at Osaka University, and helped confirm theories on the efficacy of the single-mast, square sail design.[4][5]

References

  1. ^ a b c d e "Osaka and its Technology No.38" (PDF). Osaka Municipal Government. Archived from the original (PDF) on 2011-07-22. Retrieved 2009-05-08.
  2. ^ "Names of Japanese Ships of War" (PDF). New York Times. 1894-10-07. Retrieved 2009-05-09.
  3. ^ "What's in Osaka Maritime Museum?" (PDF). Osaka Maritime Museum. p. 2. Retrieved 2009-05-09.[permanent dead link]
  4. ^ "Edo freighter replica to be tested in Osaka Bay". Japan Times. 1999-06-10. Retrieved 2009-05-09.
  5. ^ Nomoto, Kensaku; Yutaka, Masuyama; Akira, Sakurai. "Numerical Simulation of Wearing Maneuver of "Naniwa-maru," Reconstruction of a Japanese Sailing Trader in Early 1800s". Journal of the Kansai Society of Naval Architects (in Japanese and English) (240): 77–84. ISSN 1346-7727. Retrieved 2009-05-09.