I think it does a good job of explaining the modelling of a diode. I'm not sure what sort of style changes are being called for, but I think the explanatory nature of the article is helpful and is generally used in textbooks. Accountable Government 03:59, 2 March 2006 (UTC)[reply]
The integrity of the article seems fine, however I added subsections and a contents box to improve the formatting. If it's okay, could someone remove the "formatting and style" box. Cheers
Dom 17:42, 5 January 2007 (UTC)[reply]
This article continues the myth that there is a Threshold Voltage in the forward V/I curve, however as the curve is essentially an Exponential, there can be no threshold, ie the rate of change is smooth and continuous, there is no elbow. Draw it on a Log scale and the "elbow" disappears. The idea of an Offset Voltage comes from a simple piece-wise approximation that is taught to students and technicians, but is then taken as gospel. The Threshold Voltage does not in fact exist. Gutta Percha (talk) 06:59, 17 September 2013 (UTC)[reply]
For a power supply, low impedance is the paradigm. With low impedance blinders on maybe the threshold voltage myth has little impact. For small signal applications, the notion that a diode has a threshold voltage is a critical misunderstanding. Would someone with technical understanding of diodes and writing skills please start a new section that addresses this. 65.209.92.126 (talk) 16:28, 23 September 2013 (UTC)[reply]
Indeed the "knee" or "elbow" is simply an illusion when plotted in a particular linear scale. If the vertical range is changed, then the "knee" shifts...a good animation of this is: https://www.abarry.org/knee.htm
On the other hand, in practice, a particular circuit may have some "typical" current range. If some arbitrary number of milliamps can be treated as the point of "significant-enough" conduction, then a diode will have a particular voltage drop that doesn't change by much when the current changes a little. That makes for a simplified infinite step model of a diode's I/V curve. And using such a simplified model can greatly facilitate quickly analyzing circuits. So in practice the concept of a diode having a "threshold voltage" is useful even though in theory and in truth a diode doesn't have a threshold voltage.
Let's not use the word "ideal" to describe diode approximations other than the "Shockley ideal diode equation"[edit]
The word "ideal" to describe a diode can be very ambiguous. For one, we have the exponential Shockley diode equation which is sometimes called the "Shockley ideal diode equation" with its ideality factor n equals 1. But however this article currently describes a "Mathematically idealized diode" as to be something *very* different:
Firstly, consider a mathematically idealized diode. In such an ideal diode, if the diode is reverse biased, the current flowing through it is zero. This ideal diode starts conducting at 0 V and for any positive voltage an infinite current flows and the diode acts like a short circuit. The I-V characteristics of an ideal diode are shown below:
And then later in this same article it describes a couple variants that use this "ideal" diode as a starting point.
I would suggest that this article refrain from using the word "ideal" unless it specifically is talking about the "Shockley ideal diode equation", to avoid confusion.
So this section "Mathematically idealized diode" should instead be called "infinite step response diode approximation"? Because what it really looks like is the Heaviside step function multiplied by infinity. Em3rgent0rdr (talk) 17:34, 6 July 2023 (UTC)[reply]
