Turbomeca TM 333
Appearance
TM 333 | |
---|---|
Type | Turboshaft |
National origin | France |
Manufacturer | Turbomeca |
First run | 1981 |
Major applications | HAL Dhruv |
The Turbomeca TM 333 is a turboshaft engine manufactured by French company Turbomeca and designed for helicopters weighing 4-5 tonnes.[1] It first ran in August 1981 and was introduced commercially in the mid-1980s.[1] It was the first Turbomeca engine to use a single stage turbine, making it more compact than its predecessors.[1] In its original design, the engine was rated at 750 continuous horsepower, though it was designed to allow for future power increases,[1] and the later 2B2 variant made 1,100 horsepower.[2]
Variants
- TM 333 2B2
- The TM 333 2B2 powered early versions of the HAL Dhruv, though it was replaced by the Shakti engine, which was jointly developed by HAL and Turbomeca.[2]
- TM 333 2M2
- The TM333 2M2 is used on the HAL Cheetal and Chetan, upgraded versions of the Cheetah and Chetak, respectively.[3]
Applications
Specifications (TM 333 2M2)
Data from EASA TCDS E.030 TM333 Series Issue 05 [4]
General characteristics
- Type: Twin-spool turboshaft
- Length: 1,045 mm (41.1 in)
- Diameter: 454 mm (17.9 in) (width), 745 mm (29.3 in) (height)
- Dry weight: 162.5 kg (358.3 lb)
Components
- Compressor: Two-stage axial, single-stage centrifugal
- Combustors: Annular,reverse flow
- Turbine: Single-stage compressor turbine, single-stage power turbine
Performance
- Maximum power output: 736 kW (987 shp) (maximum continuous)
See also
Related lists
References
- ^ a b c d "TM.333; a new generation turboshaft" (PDF). Flight International. 1 January 1983. Retrieved 13 April 2017.
- ^ a b "Military engines: Local power". Flightglobal. 1 May 2007. Retrieved 13 April 2017.
- ^ "Gaining altitude". Flightglobal. 21 February 2006. Retrieved 13 April 2017.
- ^ EASA E.030 www.easa.europa.eu - Retrieved: 7 December 2021
External links
This aircraft engine article is missing some (or all) of its specifications. If you have a source, you can help Wikipedia by adding them. |