Jump to content

USRA Light Santa Fe

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Trainsfan13 (talk | contribs) at 15:43, 23 June 2022. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

USRA Light Santa Fe
Type and origin
Power typeSteam
BuilderAmerican Locomotive Company,
Baldwin Locomotive Works
Build date1918-1919
Total produced94
Specifications
Configuration:
 • AAR2-10-2
 • UIC1′E1′ h2
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Leading dia.33 in (838 mm)
Driver dia.57 in (1,448 mm)
Trailing dia.43 in (1,092 mm)
Wheelbase40 ft 4 in (12.29 m)
Length52 ft 10 in (16.10 m) without tender
Width10 ft 8 in (3.25 m)
Height15 ft 0 in (4.57 m)
Adhesive weight276,000 lb (125,000 kilograms; 125 metric tons)
Loco weight352,000 lb (160,000 kilograms; 160 metric tons)
Tender weight188,300 lb (85,400 kilograms; 85.4 metric tons)
Total weight540,300 lb (245,100 kilograms; 245.1 metric tons)
Fuel typeSoft coal (bituminous)
Firebox:
 • Grate area76.3 sq ft (7.09 m2)
Boiler pressure200 psi (1.38 MPa)
Heating surface:
 • Firebox373 sq ft (34.7 m2)
 • Tubes2,970 sq ft (275.9 m2)
 • Flues1,323 sq ft (122.9 m2)
 • Total surface4,666 sq ft (433.5 m2)
Superheater:
 • Heating area1,085 sq ft (100.8 m2)
CylindersTwo
Cylinder size27 in × 32 in (686 mm × 813 mm)
Valve gearSouthern (see drawing)
Performance figures
Tractive effort69,600 lbf (309.6 kN)
Factor of adh.3.95
Career
Preserved1
Scrapped1945-1961
DispositionOne preserved, remainder scrapped
General arrangement drawing

The USRA Light Santa Fe was a USRA standard class of steam locomotive designed under the control of the United States Railroad Administration, the nationalized railroad system in the United States during World War I. These locomotives were of 2-10-2 wheel arrangement in the Whyte notation, or 1′E1′ in UIC classification; this arrangement was commonly named "Santa Fe" in the United States. At the time, the Santa Fe was the largest non-articulated type in common use, primarily in slow drag freight duty in ore or coal service.

A total of 94 of these locomotives were constructed under the auspices of the USRA. They went to the following railroads:

Table of original USRA allocation [1]
Railroad Quantity Class Road numbers Notes
Ann Arbor Railroad
4
190–193
Built in 1919 by Baldwin(Renumbered 2550–2553, reclassified L2, Sold to Kansas City Southern Railway #220–223, September 1942.[2]KCS class L-1[3]) All scrapped between 1945-1957.
Chicago and Western Indiana Railroad
5
20-24 Built 1918 by ALCO. All scrapped between 1950-1955.
Duluth, Missabe and Northern Railway
10
506–515
Built 1919 by Brooks Works (to Duluth, Missabe and Iron Range Railroad same numbers)[4] Scrapped between 1952-1954. One example preserved.
New York Central Railroad subsidiary
Boston and Albany Railroad
10
1100–1109
Built 1919 by ALCO-Brooks (to Canadian National Railway #4200–4209 class T-3-a in 1928.[5]) All scrapped between 1955-1961.
Seaboard Air Line Railroad
15
485–499
Built 1919 by Baldwin (renumbered 2485–2499[6]) All scrapped between 1950-1953.
Southern Railway
50
5200–5249
Built 1918 by ALCO.[7] All scrapped between 1949 - 1952.
Total 94

Only one USRA Light 2-10-2 survives: DM&IR 506 is on display at the National Railroad Museum in Green Bay, Wisconsin

References

  1. ^ "USRA locomotives". Steamlocomtive.com. Retrieved 2009-02-16.
  2. ^ Burger, Henry F. "Ann Arbor Railroad Steam Locomotive Roster". Ann Arbor Railroad Technical and Historical Society website. Retrieved 2009-02-18.
  3. ^ Drury p.212
  4. ^ Drury pp.168, 170
  5. ^ Drury, pp. 64, 278
  6. ^ Drury, p.350
  7. ^ Drury pp.370, 372