Jump to content

Winding engine

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by Boleslaw (talk | contribs) at 18:43, 16 February 2022 (avoid split infinitive). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Small steam winding engine
External pithead gear and the winding engine house

A winding engine is a stationary engine used to control a cable, for example to power a mining hoist at a pit head. Electric hoist controllers have replaced proper winding engines in modern mining, but use electric motors that are also traditionally referred to as winding engines.

Early winding engines were hand, or more usually horse powered.[1]

Winding drum, with depth indicator to the left

The first powered winding engines were stationary steam engines. The demand for winding engines was one factor that drove James Watt to develop his rotative beam engine, with its ability continuously to turn a winding drum, rather than the early reciprocating beam engines that were only useful for working pumps.[2]

They differ from most other stationary steam engines in that, like a steam locomotive, they need to be able to stop frequently and also reverse. This requires more complex valve gear and other controls than are needed on engines used in mills or to drive pumps.

[edit]

References

[edit]
  1. ^ "Photograph of a horse power being used to thresh wheat in southeastern Washington State". Garfield County Heritage Collection.
  2. ^ "Pumping Engine".
Electric winding engine