Jump to content

Talk:Proxy ARP: Difference between revisions

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia
Content deleted Content added
SineBot (talk | contribs)
m Signing comment by 122.164.54.124 - ""
No edit summary
Line 1: Line 1:
{{WikiProject Computing|class=|importance=}}
{{WikiProject Computing|class=|importance=}}
Could the opening sentence be any less clear?


I made a couple changes to help clear up the intro a little bit, per the below concern. To answer your technical concern: The issue you raise is not valid. Proxy ARP is not necessary for devices on the same ethernet network, because on a standard ethernet if two devices are in the same subnet and one sends an ARP for the other, the intended device is more than willing to respond to that ARP request directly. Proxy ARP works when a router or server sits between two networks, and has a MAC entry that matches the ARP request. It supplies it's own MAC address in response to the request, and simply routes the traffic to the correct destination. I hope that clears up some of the confusion. ~mtzweil
In the introduction section it says proxy arp is used to communicate between two different networks. I think it is wrong. ARP is used only within the same subnet. If Host A wants to reach Host B on a different network, it will arp for the gateways ip address and not for Host B's address. <small>—Preceding [[Wikipedia:Signatures|unsigned]] comment added by [[User:Sanjaysr|Sanjaysr]] ([[User talk:Sanjaysr|talk]] • [[Special:Contributions/Sanjaysr|contribs]]) 14:56, 20 March 2008 (UTC)</small><!-- Template:Unsigned --> <!--Autosigned by SineBot-->


Could the opening sentence be any less clear?


In the introduction section it says proxy arp is used to communicate between two different networks. I think it is wrong. ARP is used only within the same subnet. If Host A wants to reach Host B on a different network, it will arp for the gateways ip address and not for Host B's address. <small>—Preceding [[Wikipedia:Signatures|unsigned]] comment added by [[User:Sanjaysr|Sanjaysr]] ([[User talk:Sanjaysr|talk]] • [[Special:Contributions/Sanjaysr|contribs]]) 14:56, 20 March 2008 (UTC)</small><!-- Template:Unsigned --> <!--Autosigned by SineBot--> <span style="font-size: smaller;" class="autosigned">—Preceding [[Wikipedia:Signatures|unsigned]] comment added by [[Special:Contributions/122.164.54.124|122.164.54.124]] ([[User talk:122.164.54.124|talk]]) </span><!-- Template:UnsignedIP --> <!--Autosigned by SineBot-->
In the introduction section it says proxy arp is used to communicate between two different networks. I think it is wrong. ARP is used only within the same subnet. If Host A wants to reach Host B on a different network, it will arp for the gateways ip address and not for Host B's address. <small>—Preceding [[Wikipedia:Signatures|unsigned]] comment added by [[User:Sanjaysr|Sanjaysr]] ([[User talk:Sanjaysr|talk]] • [[Special:Contributions/Sanjaysr|contribs]]) 14:56, 20 March 2008 (UTC)</small><!-- Template:Unsigned --> <!--Autosigned by SineBot--> <span style="font-size: smaller;" class="autosigned">—Preceding [[Wikipedia:Signatures|unsigned]] comment added by [[Special:Contributions/122.164.54.124|122.164.54.124]] ([[User talk:122.164.54.124|talk]]) </span><!-- Template:UnsignedIP --> <!--Autosigned by SineBot-->

Revision as of 05:56, 29 July 2009

WikiProject iconComputing Unassessed
WikiProject iconThis article is within the scope of WikiProject Computing, a collaborative effort to improve the coverage of computers, computing, and information technology on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.
???This article has not yet received a rating on Wikipedia's content assessment scale.
???This article has not yet received a rating on the project's importance scale.

I made a couple changes to help clear up the intro a little bit, per the below concern. To answer your technical concern: The issue you raise is not valid. Proxy ARP is not necessary for devices on the same ethernet network, because on a standard ethernet if two devices are in the same subnet and one sends an ARP for the other, the intended device is more than willing to respond to that ARP request directly. Proxy ARP works when a router or server sits between two networks, and has a MAC entry that matches the ARP request. It supplies it's own MAC address in response to the request, and simply routes the traffic to the correct destination. I hope that clears up some of the confusion. ~mtzweil


Could the opening sentence be any less clear?

In the introduction section it says proxy arp is used to communicate between two different networks. I think it is wrong. ARP is used only within the same subnet. If Host A wants to reach Host B on a different network, it will arp for the gateways ip address and not for Host B's address. —Preceding unsigned comment added by Sanjaysr (talkcontribs) 14:56, 20 March 2008 (UTC) —Preceding unsigned comment added by 122.164.54.124 (talk) [reply]