SNOX process: Difference between revisions
No edit summary |
No edit summary |
||
| Line 32: | Line 32: | ||
<!--- See [[Wikipedia:Footnotes]] on how to create references using <ref></ref> tags which will then appear here automatically --> |
<!--- See [[Wikipedia:Footnotes]] on how to create references using <ref></ref> tags which will then appear here automatically --> |
||
{{Reflist}} |
{{Reflist}} |
||
Processes for sulfur recovery, regeneration of spent acid, and reduction of nox emissions/Springer New York/ISSN 0009-2355 (Print) 1573-8329 (Online)[/http://www.springerlink.com/content/57351150l6074366] |
|||
<!--- Categories ---> |
<!--- Categories ---> |
||
Revision as of 08:46, 29 April 2010
You must add a |reason= parameter to this Cleanup template – replace it with {{Cleanup|reason=<Fill reason here>}}, or remove the Cleanup template.
SNOX Flue gas desulphurisation
The SNOX process is an innovative process which removes sulphur dioxide, nitrogen oxides and particulates from flue gases. The sulphur is recovered as concentrated sulphuric acid and the nitrogen oxides are reduced to free nitrogen. The process is based on the well-known WSA process Wet sulfuric acid process an efficient process for recovering sulfur from various process gasses in the form of commercial quality sulfuric acid (H2SO4).[1]
The SNOX process is based on catalytic reactions and does not consume water or absorbents. Neither does it produce any waste, except for the separated dust.
In addition the process can handle other sulphurous waste streams. This is highly interesting in refineries, where e.g. H2S gas, sour water stripper gas and Claus tail gas can be led to the SNOX plant, and thereby investment in other waste gas handling facilities can be saved.
SNOX for flue gas desulphurisation
The SNOX process can be applied for treatment of flue gases from combustion of primarily high-sulphur fuels in power stations, refinery and other industrial boilers and for treatment of other waste gases containing sulphur compounds and nitrogen oxides.
The first full scale plant treating 1,000,000 Nm³/h flue gas from a 300 MW coal fired power plant in Denmark was started up in 1991.
The largest SNOX plant in operation treats 1,200,000 Nm³/h flue gas from four petroleum coke fired boilers at a refinery in Sicily, Italy.
The process catalytically reduces both the SO2 and the NOx in flue gases by more than 95% and with integration of the recovered heat from the WSA Condenser it is reported to have lower operating costs than conventional technologies [2]
SNOX - for enhanced sulphuric acid production
In several places there is a need for both electric power and sulphuric acid. A cheap high-sulphur fuel such as petroleum coke can be used for power generation, while the flue gas is cleaned in SNOX plant under production of sulphuric acid. Elemental sulphur is fired in the SNOX plant in order to produce the desired amount of sulphuric acid.