Emlenton Bridge: Difference between revisions
All Is One (talk | contribs) bold / layout |
Jseeherman (talk | contribs) Added reference to bridge in West Virginia for ranking purposes |
||
| Line 31: | Line 31: | ||
The '''Emlenton Bridge''' is a steel deck [[truss]] bridge that spans the [[Allegheny River]] just south of the town of [[Emlenton, Pennsylvania]] at approximately mile marker 43 on [[I-80]]. With a height of {{convert|270|ft|m}} above the river, the Emlenton Bridge was the highest bridge in the [[Interstate Highway System]] when completed in 1968 (The [[Lewiston-Queenston Bridge]] is higher but is technically an international bridge, not part of the Interstate Highway system). This record was held until 1971 with the opening of the [[Fred G. Redmon Bridge]] near [[Selah, Washington]]. |
The '''Emlenton Bridge''' is a steel deck [[truss]] bridge that spans the [[Allegheny River]] just south of the town of [[Emlenton, Pennsylvania]] at approximately mile marker 43 on [[I-80]]. With a height of {{convert|270|ft|m}} above the river, the Emlenton Bridge was the highest bridge in the [[Interstate Highway System]] when completed in 1968 (The [[Lewiston-Queenston Bridge]] is higher but is technically an international bridge, not part of the Interstate Highway system). This record was held until 1971 with the opening of the [[Fred G. Redmon Bridge]] near [[Selah, Washington]]. |
||
The Emlenton Bridge remains the highest road bridge in Pennsylvania; with an overall span of {{convert|1668|ft|m}} it was the largest bridge constructed as part of the [[Keystone Shortway]] project. With the completion of the Interstate System, it is likely that the Emlenton Bridge will remain the |
The Emlenton Bridge remains the highest road bridge in Pennsylvania; with an overall span of {{convert|1668|ft|m}} it was the largest bridge constructed as part of the [[Keystone Shortway]] project. With the completion of the Interstate System, it is likely that the Emlenton Bridge will remain the third highest bridge in the system for a significant time, behind the [[Glade Creek Bridge]] in [[West Virginia]] and the aforementioned Redmon Bridge. |
||
The bridge was designed by the consultant Buchart-Horn led by Ted Andrzejewski, an acquaintance of the noted bridge engineer [[Ralph Modjeski]]. The contractor of record is Brodhead Construction located in [[Aliquippa, Pennsylvania]].<ref>{{cite book |author=Shank, William |date=1990 |title=Historic Bridges of Pennsylvania (Revised) |location=York,PA |publisher=American Canal & Tranportation Center |page=65}}</ref> |
The bridge was designed by the consultant Buchart-Horn led by Ted Andrzejewski, an acquaintance of the noted bridge engineer [[Ralph Modjeski]]. The contractor of record is Brodhead Construction located in [[Aliquippa, Pennsylvania]].<ref>{{cite book |author=Shank, William |date=1990 |title=Historic Bridges of Pennsylvania (Revised) |location=York,PA |publisher=American Canal & Tranportation Center |page=65}}</ref> |
||
Revision as of 19:56, 24 June 2010
Emlenton Bridge | |
|---|---|
 | |
| Coordinates | 41°10′27″N 79°41′51″W / 41.1743°N 79.6975°W |
| Carries | I-80 |
| Crosses | Allegheny River |
| Locale | Emlenton, Pennsylvania |
| Maintained by | Pennsylvania Department of Transportation |
| Characteristics | |
| Design | Truss bridge |
| Material | Steel |
| Total length | 1,668 feet (508 m) |
| Width | 4 lanes |
| Clearance below | 270 feet (82 m) |
| History | |
| Opened | 1968 |
| Location | |
 | |
The Emlenton Bridge is a steel deck truss bridge that spans the Allegheny River just south of the town of Emlenton, Pennsylvania at approximately mile marker 43 on I-80. With a height of 270 feet (82 m) above the river, the Emlenton Bridge was the highest bridge in the Interstate Highway System when completed in 1968 (The Lewiston-Queenston Bridge is higher but is technically an international bridge, not part of the Interstate Highway system). This record was held until 1971 with the opening of the Fred G. Redmon Bridge near Selah, Washington.
The Emlenton Bridge remains the highest road bridge in Pennsylvania; with an overall span of 1,668 feet (508 m) it was the largest bridge constructed as part of the Keystone Shortway project. With the completion of the Interstate System, it is likely that the Emlenton Bridge will remain the third highest bridge in the system for a significant time, behind the Glade Creek Bridge in West Virginia and the aforementioned Redmon Bridge.
The bridge was designed by the consultant Buchart-Horn led by Ted Andrzejewski, an acquaintance of the noted bridge engineer Ralph Modjeski. The contractor of record is Brodhead Construction located in Aliquippa, Pennsylvania.[1]
An interesting fact about the Emlenton Bridge is that due to its size it is actually located in three different Pennsylvania counties. One side of the bridge is in Venango County, the other in Clarion County, but the southwest abutment resides in Butler County.
See also
References
- ^ Shank, William (1990). Historic Bridges of Pennsylvania (Revised). York,PA: American Canal & Tranportation Center. p. 65.
External links
http://www.pahighways.com/interstates/I80.html
Bridges of the Allegheny River | ||||
|---|---|---|---|---|
| ||||
