Capacitive deionization

Capacitive deionization (CDI) is a technology for desalination and water treatment in which salts and minerals are removed from water by applying an electric field between two porous (often, carbon) electrodes, similar to electric double-layer capacitors. Counterions are stored in the electrical double layers which form at the solution interface inside the porous electrodes, with the ions of cations stored in the negatively charged electrode, and anions stored in the positively charged electrode (anode)(fig.1).

The employed electrodes in CDI are typically prepared from porous carbon particles with internal areas for ion adsorption in the order of 1000 m² per gram, but other materials are also possible, such as carbon nanotubes and nanofibers. The two oppositely placed (planar) electrodes are separated by a thin open structured “spacer”, or flow channel, through which the water flows. Upon applying an electrical potential difference between the two electrodes of the order of 0.8–1.5 V, anions are adsorbed in the anode and cations into the cathode, thereby producing a (partially) ion-depleted product stream. After the ion adsorption capacity of the electrodes has been reached, the applied voltage difference can be reduced to zero and a small product stream concentrated in salt is obtained in the ion release-step. In this way the inflowing stream of brackish water is split into a partially deionized stream and a more concentrated brine.

• 
  Fig. 1. Schematic view of capacitive deionization set-up.

Membrane capacitive deionization

Membrane capacitive deionization (MCDI)is a modification of CDI by inserting an anion-exchange membrane in front of the anode, and a cation exchange membrane in front of the cathode (fig.2). In this way, coions of the membrane(e.g., the anions in the cathode) are inhibited from leaving the electrode region. The coion-expulsion-effect, which at low voltages negatively influences the salt adsorption rate and removal capacity in CDI, is absent in MCDI. Another advantage of MCDI is that during ion release, it is possible to use a reversed voltage which leads to a faster and more complete rejection of the counterions back into the flow channel.

• 
  Fig.2. Schematic view of ion separation in membrane capacitive deionization.

References

1. G.W. Murphy and D.D. Caudle (1967). “Mathematical theory of electrochemical demineralization in flowing systems,” Electrochim. Acta 12: 1655-1664.
2. A.M. Johnson and J. Newman (1971). “Desalting by means of porous carbon electrodes,” J. Electrochem. Soc. 118: 510-517.
3. Y. Oren and A. Soffer (1978). “Electrochemical Parametric Pumping,” J. Electrochem. Soc. 125: 869-875.
4. J.C. Farmer et al. (1996). “Capacitive Deionization of NaCI and NaNO3 Solutions with Carbon Aerogel Electrodes,” J. Electrochem. Soc. 143: 159-169.
5. C.J. Gabelich et al. (2002). “Electrosorption of Inorganic Salts from Aqueous Solution Using Carbon Aerogels,” Env. Sci. & Techn. 36: 3010-3019.
6. M.D. Andelman (2002). "Charge barrier flow-through capacitor," CA Patent 2444390.
7. T.J. Welgemoed and C.F. Schutte (2005). " Capacitive Deionization Technology: An alternative desalination solution," Desalination 183: 327-340.
8. J.-B. Lee et al. (2006). "Desalination of a thermal power plant wastewater by membrane capacitive deionization," Desalination 196: 125-134.
9. Y. Oren, (2008). "Capacitive deionization (CDI) for desalination and water treatment — past, present and future (a review)," Desalination 228: 10-29.
10. H. Li et al. (2008). "Electrosorptive desalination by carbon nanotubes and nanofibres electrodes and ion-exchange membranes," Water Research 42: 4923-4928.
11. P. Xu et al. (2008). “Treatment of brackish produced water using carbon aerogel-based capacitive deionization technology,” Water Research 42: 2605-2617.
12. P.M. Biesheuvel (2009). "Thermodynamic cycle analysis for capacitive deionization," J. Colloid Interface Sci. 332: 258-264.
13. P.M. Biesheuvel et al. (2009). “Dynamic adsorption/desorption process model for capacitive deionization," J. Phys. Chem. C 113: 5636-5640.
14. R. Zhao et al. (2010). "Charge efficiency: A functional tool to probe the double-layer structure inside of porous electrodes and application in the modeling of capacitive deionization," J. Phys. Chem. Lett. 1: 205-210.
15. Y. Bouhadana et al. (2010). “Several Basic and Practical Aspects Related to Electrochemical Deionization of Water,” AIChE J. 56: 779-789.
16. M.A. Anderson et al. (2010). “Capacitive deionization as an electrochemical means of saving energy and delivering clean water. Comparison to present desalination practices: Will it compete?,” Electrochim. Acta 55: 3845-3856.
17. P.M. Biesheuvel and A. van der Wal (2010). “Membrane capacitive deionization,” J. Membrane Sci. 346: 256-262.
18. Y.-J. Kim and J.-H. Choi (2010). “Improvement of desalination efficiency in capacitive deionization using a carbon electrode coated with an ion-exchange polymer,” Water Research 44: 990-996.