Digital mobile radio: Difference between revisions
Line 24: | Line 24: | ||
==Implementations== |
==Implementations== |
||
Motorola Mototbro |
*Motorola Mototbro |
||
Hytera DMR series |
*Hytera DMR series |
||
Vertex Standard/Yaesu DMR series |
*Vertex Standard/Yaesu DMR series |
||
==See also== |
==See also== |
Revision as of 18:06, 19 March 2012
Digital mobile radio (DMR) is an open digital radio standard for professional mobile radio (PMR) users specified in the European Telecommunications Standards Institute (ETSI) Standards TS 102 361 and used in products sold in all regions of the world. The applicable ETSI compliance standards are EN 300 113 and EN 300 390. Products built to the DMR standard also comply with the U.S. Federal Communications Commission (FCC) mandates in the United States for the use and certification of 12.5 kHz and 6.25 kHz narrowband technology for systems covered by Part 90 regulations.
Specifications
The DMR standard operates within the existing channel spacing used in land mobile frequency bands globally. Its primary goal is to specify a digital system with low complexity, low cost and interoperability across brands, so radio communications purchasers are not locked in to a proprietary solution. DMR provides voice, data and other supplementary services. DMR is a two-slot, time division multiple access (TDMA) system offering voice, data and a range of other features and applications.
DMR Tiers
DMR Tier I
DMR Tier I products are for license-free use in the 446 MHz band.
This part of the standard provides for consumer applications and low-power commercial applications, using a maximum of 0.5 watt RF power. There have been no commercial launches of DMR Tier 1 products to date.
DMR Tier II
DMR Tier II covers licensed conventional radio systems, mobiles and hand portables operating in PMR frequency bands from 66-960 MHz. The ETSI DMR Tier II standard is targeted at those users who need spectral efficiency, advanced voice features and integrated IP data services in licensed bands for high-power communications. ETSI DMR Tier II specifies two slot TDMA in 12.5 kHz channels. A number of manufacturers have DMR Tier II complaint products on the market.
DMR Tier III
DMR Tier III covers trunking operation in frequency bands 66-960 MHz. The Tier III standard specifies two slot TDMA in 12.5 kHz channels. Tier III supports voice and short messaging handling similar to MPT-1327 with built-in 128 character status messaging and short messaging with up to 288 bits of data in a variety of formats. It also supports packet data service in a variety of formats, including support for IPv4 and IPv6. Tier III complaint products will be launched in 2012.
DMR Association
In 2005, a Memorandum of Understanding (MOU) was formed with potential DMR suppliers including Tait Radio Communications, Fylde Micro, Selex, Motorola, Vertex Standard, Kenwood and Icom to establish common standards and interoperability. While the DMR standard does not specify the vocoder, MOU members agreed to use the half rate DVSI Advanced Multi-Band Excitation (AMBE) vocoder to ensure interoperability. In 2009, the MOU members set up the DMR Association to work on interoperability between vendors equipment and to provide information about the DMR standard. Formal interoperability testing has been taking place since 2010. Results are published on the DMR Association web site. There are approximately 40 members of the DMR Association.
Implementations
- Motorola Mototbro
- Hytera DMR series
- Vertex Standard/Yaesu DMR series
See also
External links