Jump to content

Conservation and restoration of time-based media art: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
No edit summary
No edit summary
Line 12: Line 12:
Good storage practices help ensure the long-life of an artwork and should be incorporated into a museum's conservation strategy. Storage practices vary by media, so a museum will need to employ a range of storage options to best care for their time-based media art collections.
Good storage practices help ensure the long-life of an artwork and should be incorporated into a museum's conservation strategy. Storage practices vary by media, so a museum will need to employ a range of storage options to best care for their time-based media art collections.


A variety of physical media, such as film, tape, and disks must be stored properly to prevent physical loss. Prevention is the best measure of protection against loss. How media is stored will be dependent on the type of media it is, film has different considerations than disks or videotapes and film often requires a sensitive approach to storage.
A variety of physical media, such as film, tape, and disks must be stored properly to prevent physical loss. Prevention is the best measure of protection against loss. How media is stored will be dependent on the type of media it is, film has different considerations than disks or videotapes and film often requires a sensitive approach to storage. Generally, time-base storage will require cool temperatures and low humidity (IMAP 101).


Film - is typically stored in its canister, laid flat, and stacked on top of each other. Film must be stored in a climate-controlled room due to its susceptibility to heat and humidity. Film may also have additional special storage considerations, which may involve low temperature freezes to retard further damage <ref> National Park Service (n.d.) Cold Storage. Retrieved from http://www.nps.gov/museum/coldstorage/html/intro1_1.html </ref>. How stable the film is depends largely on the type of stock, but film, if well taken care of, is generally able to last for long periods of time. Film has been made on a variety of materials, including nitrate-based stock and acetate-based stocks, and polyester-backed film, each have their own considerations. Nitrate film must be handled carefully, it is highly flammable; [https://en.wikipedia.org/wiki/Cellulose_acetate_film#Decay_and_the_.22vinegar_syndrome.22 cellulose acetate film] stocks are at risk of vinegar syndrome, whereas polyester-backed films are not <ref name="IMAPP101" IMAP. (2009). Preservation 101. Retrieved from www.imappreserve.org/pres_101/index.html </ref>. Film is stored in a colder environment than other time-based media, different types of film have different optimum storage temperatures. Color film should be stored at the coldest temperature possible to reduce fading, 0 - 30 degrees Fahrenheit. Black and white film can be stored at a warmer temperature of 25-50 degrees Fahrenheit <ref name="IMAPP101"/>.
'''Film''' - is typically stored in its canister, laid flat, and stacked on top of each other. Film must be stored in a climate-controlled room due to its susceptibility to heat and humidity. Film may also have additional special storage considerations, which may involve low temperature freezes to retard further damage <ref> National Park Service (n.d.) Cold Storage. Retrieved from http://www.nps.gov/museum/coldstorage/html/intro1_1.html </ref>. How stable the film is depends largely on the type of stock, but film, if well taken care of, is generally able to last for long periods of time. Film has been made on a variety of materials, including nitrate-based stock and acetate-based stocks, and polyester-backed film, each have their own considerations. Nitrate film must be handled carefully, it is highly flammable; [https://en.wikipedia.org/wiki/Cellulose_acetate_film#Decay_and_the_.22vinegar_syndrome.22 cellulose acetate film] stocks are at risk of vinegar syndrome, whereas polyester-backed films are not <ref name="IMAPP101"> IMAP. (2009). Preservation 101. Retrieved from www.imappreserve.org/pres_101/index.html </ref>. Film is stored in a colder environment than other time-based media, and different types of film have different optimum storage temperatures. Color film should be stored at the coldest temperature possible to reduce fading, 0-30 degrees Fahrenheit. Black and white film can be stored at a warmer temperature of 25-50 degrees Fahrenheit <ref name="IMAPP101"/>.


Magnetic Videotape- On the other hand, magnetic videotape is highly unstable, having a short life (often only a few decades) especially if exposed to warm or humid conditions <ref name="keepingtime"/>. Media such as video tapes, should be stored in upright, under cool, dry, dust-free conditions <ref name="keepingtime"/>.
'''Magnetic Videotape and Audio'''- On the other hand, magnetic videotape was never meant to last, and often has a short life (often only a few decades) especially if exposed to warm or humid conditions <ref name="keepingtime"/>. Media such as video tapes, should be stored in upright, under cool, dry, dust-free conditions <ref name="keepingtime"/>. Videotapes may be stored in polypropylene cases, but without paper inside the cases (IMAP101). Magnetic media should never be stored at temperatures lower than 46 degrees Fahrenheit (IMAP 101). They should also be kept away from magnetic sources, which could demagnetize them. (IMAP)


'''Optical Digital Media''' - DVDs and CDs are another media that will need storage space. They can be stored at temperatures 62-68 degrees Fahrenheit, with 33-45% relative humidity, but cooler temperatures are recommended to ensure a longer life (IMAP). Optical media should be stored in hard plastic jewel cases or other inert plastic containers; avoid storage in plastic sleeves as the plastic can stick to the disk (IMAP101).
Magnetic Audio-

DVDs and CDs are another media that will need storage space. (Add storage info for DVDs/CDs).


Because time-based media is dependent on technology to view it, it must also be kept on site and stored. Specific types of technological devices may be required for the art or preferred by the artist. Maintaining the technology that the time-based media art is played on is one conservation strategy, and what is stored depends on the device. Due to rapid changes in video technology and the high cost of maintaining and storing equipment, it is usually not practical for a museum as a primary strategy <ref name="keepingtime"/>. Museums do at times need to store obsolete technology though, such as VCRs, old computers, etc, particularly if they have been customized for the artwork by the artist. In these cases, conservation strategies could included acquiring spare parts (early on in the acquisition process, before the technology goes out of manufacture), making new components if necessary, and/or recreating significant features by inexact substitution (in order words, using the "best match") <ref name= "PLManagement"> Laurenson, Pip (2005). The Management of Display Equipment in Time-based Media Installations. Tate Papers. </ref>. Consumer products, though, are not meant for repeated viewing on such a large scale and are usually not expected to have a long enough life to maintain the device well into the future. Until better solutions are found, keeping and maintaining old technology will remain a necessity for now. Unlike video equipment, film equipment is far more stable and museums may be more likely to conserve the equipment along with the media because there is less upkeep and film equipment does not need constant replacement due to obsolescence <ref name="keepingtime"/>. A working projector will always run film. Technological devices should be stored in a clean, climate controlled environment, as humidity can be damaging to electronic components.
Because time-based media is dependent on technology to view it, it must also be kept on site and stored. Specific types of technological devices may be required for the art or preferred by the artist. Maintaining the technology that the time-based media art is played on is one conservation strategy, and what is stored depends on the device. Due to rapid changes in video technology and the high cost of maintaining and storing equipment, it is usually not practical for a museum as a primary strategy <ref name="keepingtime"/>. Museums do at times need to store obsolete technology though, such as VCRs, old computers, etc, particularly if they have been customized for the artwork by the artist. In these cases, conservation strategies could included acquiring spare parts (early on in the acquisition process, before the technology goes out of manufacture), making new components if necessary, and/or recreating significant features by inexact substitution (in order words, using the "best match") <ref name= "PLManagement"> Laurenson, Pip (2005). The Management of Display Equipment in Time-based Media Installations. Tate Papers. </ref>. Consumer products, though, are not meant for repeated viewing on such a large scale and are usually not expected to have a long enough life to maintain the device well into the future. Until better solutions are found, keeping and maintaining old technology will remain a necessity for now. Unlike video equipment, film equipment is far more stable and museums may be more likely to conserve the equipment along with the media because there is less upkeep and film equipment does not need constant replacement due to obsolescence <ref name="keepingtime"/>. A working projector will always run film. Technological devices should be stored in a clean, climate controlled environment, as humidity can be damaging to electronic components.

Revision as of 17:09, 1 May 2015

The conservation and restoration of time-based media art is the study and practice of conserving time-based media. The conservation and restoration of time-based media art is a complex undertaking within the field of conservation that includes understanding both physical and digital conservation methods and there are many facets of time-based media conservation. "Time-based media conservation aims to determine and monitor the acceptable degree of short-, middle-, and long-term change that an artwork may undergo in response to different display environments, technological developments, curatorial and exhibition-design concepts, or technicians’ preferences" [1].

Time-based media is any media that takes time to view, in other words it has a dimension of duration (e.g. five minutes and 10 seconds). Time based-media also contains a technology component, as hardware will be required to view the work [2]. Time-based media art may be made on a physical media, such as film stock, by a digital means, or a combination of the two. Examples of time-based media include “video and sound artworks, film or slide-based installations, software-based art and other forms of technology-based artworks, many of which can also be regarded as installation art” [2]. A time-based media artwork will consist of the medium- for example a video tape or DVD, the equipment it is played on, and any additional installation components [3].

Works containing video and/or audio may at times be referred to as "4D" (four-dimensional), referencing time as the fourth dimension, in addition to the other three dimensions in artwork: length, width, and height. Some time-based media works may overlap, in some respects, with New Media Art. Other terms that may also refer to time-based media art include "variable media art", "electronic art", "moving-image art", "technology-based art" and "time-based media". Time-based media collections may be housed in libraries and archives, but time-based media art collections are typically housed in museums, where film and video are collected as fine art and where the collection is typically smaller than in a library or archive [3]. Museums are more likely to collect video and installation-specific equipment as well [3]. The majority of time-based media art is completed on noncommercial films stocks, such as 8mm or 16mm, on videotape, or via a digital means. Time-based media art is differentiated from professional or commercial film-making.

Preservation and Conservation Strategies

Guidelines for collecting and preserving time-based media art are still evolving, and standards have not yet been reached [3]. Generally though, video and film must be looked at differently because of the difference between the two mediums, despite having the similarity of being recorded in time. Thus procedures for preservation and conservation will vary between the mediums. Video is a coded system, the information stored on the magnetic or digital tape can be retrieved only with a specific electronic playback device; the images on the film strip, however, are legible on their own, though the projector provides the only means by which they are put into motion [3]. When collecting film and video art, a master and at least one sub-master should be obtained. In some cases, and exhibition copy will be obtained as well, in other cases it will be copied by the museum. The Guggenheim Museum provides preservation models for Analog Standard Definition Video, Digital Standard Definition Video, and High Definition Video. Some conservators recommend that sub-masters be in digital format, as analog tape deteriorates and suffers from "general loss", each time it is duplicated [3]. General loss is degradation of the picture quality of each copy, making each copy inferior to the one that proceeded it. The sub-master will be used to make new copies of the work and the format of the sub-master needs to be updated when it nears obsolescence. Obsolescence is of particular concern to time-based media art conservationists as many artworks are tied to hardware which is no longer manufactured or supported. File formats reaching obsolescence are another concern, as operating systems change and old formats are replaced by newer ones. Fortunately there are some methods in place to help prevent the total loss of works of time-based media art.

Preventative Measures

The protection against physical loss, technological obsolescence, and digital loss of the file are important aspects of a holistic approach to preservation strategies. Measures must also be taken against environmental factors, such as humidity and pests to ensure the long-term preservation of any physical media. Integrated Pest Management is an important part of any museum preventative conservation plan. It is important to note that preventative measures do not stop deterioration fully, they merely prolong the time it takes for the media to deteriorate. Some media, like certain film stocks, are more stable than others, and some media, such as magnetic video tape are quite unstable, so again different approaches will be necessary.

Storage and Maintenance of Physical Objects

Good storage practices help ensure the long-life of an artwork and should be incorporated into a museum's conservation strategy. Storage practices vary by media, so a museum will need to employ a range of storage options to best care for their time-based media art collections.

A variety of physical media, such as film, tape, and disks must be stored properly to prevent physical loss. Prevention is the best measure of protection against loss. How media is stored will be dependent on the type of media it is, film has different considerations than disks or videotapes and film often requires a sensitive approach to storage. Generally, time-base storage will require cool temperatures and low humidity (IMAP 101).

Film - is typically stored in its canister, laid flat, and stacked on top of each other. Film must be stored in a climate-controlled room due to its susceptibility to heat and humidity. Film may also have additional special storage considerations, which may involve low temperature freezes to retard further damage [4]. How stable the film is depends largely on the type of stock, but film, if well taken care of, is generally able to last for long periods of time. Film has been made on a variety of materials, including nitrate-based stock and acetate-based stocks, and polyester-backed film, each have their own considerations. Nitrate film must be handled carefully, it is highly flammable; cellulose acetate film stocks are at risk of vinegar syndrome, whereas polyester-backed films are not [5]. Film is stored in a colder environment than other time-based media, and different types of film have different optimum storage temperatures. Color film should be stored at the coldest temperature possible to reduce fading, 0-30 degrees Fahrenheit. Black and white film can be stored at a warmer temperature of 25-50 degrees Fahrenheit [5].

Magnetic Videotape and Audio- On the other hand, magnetic videotape was never meant to last, and often has a short life (often only a few decades) especially if exposed to warm or humid conditions [3]. Media such as video tapes, should be stored in upright, under cool, dry, dust-free conditions [3]. Videotapes may be stored in polypropylene cases, but without paper inside the cases (IMAP101). Magnetic media should never be stored at temperatures lower than 46 degrees Fahrenheit (IMAP 101). They should also be kept away from magnetic sources, which could demagnetize them. (IMAP)

Optical Digital Media - DVDs and CDs are another media that will need storage space. They can be stored at temperatures 62-68 degrees Fahrenheit, with 33-45% relative humidity, but cooler temperatures are recommended to ensure a longer life (IMAP). Optical media should be stored in hard plastic jewel cases or other inert plastic containers; avoid storage in plastic sleeves as the plastic can stick to the disk (IMAP101).

Because time-based media is dependent on technology to view it, it must also be kept on site and stored. Specific types of technological devices may be required for the art or preferred by the artist. Maintaining the technology that the time-based media art is played on is one conservation strategy, and what is stored depends on the device. Due to rapid changes in video technology and the high cost of maintaining and storing equipment, it is usually not practical for a museum as a primary strategy [3]. Museums do at times need to store obsolete technology though, such as VCRs, old computers, etc, particularly if they have been customized for the artwork by the artist. In these cases, conservation strategies could included acquiring spare parts (early on in the acquisition process, before the technology goes out of manufacture), making new components if necessary, and/or recreating significant features by inexact substitution (in order words, using the "best match") [6]. Consumer products, though, are not meant for repeated viewing on such a large scale and are usually not expected to have a long enough life to maintain the device well into the future. Until better solutions are found, keeping and maintaining old technology will remain a necessity for now. Unlike video equipment, film equipment is far more stable and museums may be more likely to conserve the equipment along with the media because there is less upkeep and film equipment does not need constant replacement due to obsolescence [3]. A working projector will always run film. Technological devices should be stored in a clean, climate controlled environment, as humidity can be damaging to electronic components.

Digital Preservation

Digital files must be preserved and stored as well, otherwise they also risk degradation. Due to the large amounts of storage space that may be needed, museums may want to employ the use of a digital repository that offers digital preservation as a service. Repositories will keep the digital file stored, perform migration (moving the old format to a new, useable format), and typically offer some guarantee of preservation for a specified period of time. Artists may also wish to seek out a repository for storage of their digital artwork. Rhizome's Artbase is an online archive that seeks to preserve the digital art of today. Part of digital media storage is to ensure continuity of the digital file through format changes, thus migration becomes a likely strategy. Some conservators recommend that medium upgrades take place at least every five years, "duplication thus becomes the strategy of conservation" [3].

Time-based media art that either has an inherent digital component (i.e. a born-digital work) or has been digitized will have the need to be preserved digitally. While this work may not entirely be completed by the conservator, conservators will be aware of the methods used to preserve digital media. The Variable Media Approach [see: http://www.variablemedia.net/e/welcome.html Variable Media Network], a strategy that comes from the Guggenheim Museum's Variable Media Initiative research, offers a way in which to define the artwork independently from its medium [7]. It is a methodology that approaches a work as independent from its media, so that is may be thought of as a behavior and not something tied to its hardware [8]. This process looks to preserve works despite the uncertainty of technological developments of the future. By making a work independent from its medium, the Variable Media Approach hopes to ensure the life of the artwork well into the future, beyond the obsolescence of all current technology. The approach encompasses four aspects: Storage, Migration, Emulation, and Reinterpretation. Migration simply means to copy the files to new storage media. With migration, conservators preserve the original aspects of the work. Emulation is not as straight forward, it involves some amount of interpretation and is more an imitation of the original work [9]. (See: Digital Preservation). (Add Reinterpretation definition).

When formats or storage media become obsolete, time-based media art is typically migrated to newer and accessible platforms [10]. This will mean updating the file format so that it is playable on newer technology. In some cases this may not be in keeping with the artist's wishes, as he or she may wish to continue viewings of their work in a specific format. If the format is integral to the work, then upkeep becomes more involved. "Maintaining the functionality of hybrid installations that may combine equipment no longer commercially manufactured with data in obsolete media may be the ultimate preservation challenge" [10]. For this reason, it is encouraged that artists allow for some flexibility in future iterations of the artwork.

Examination and Documentation

Examining and documenting the physical state of an object is an important part of understanding its overall condition. The process of examination and documentation will alert conservators to any problems that need immediate or future attention.

Physical Examination

The physical components of time-based media art must be examined in order to understand their physical condition. With film, physical examination will identity a variety of deterioration processes, such as vinegar syndrome in safety films or color dye fading in color film stock. It is important to identify these early, not only to try to prevent further deterioration, but to intervene with treatment or to make a duplicate copy. Without the examination process, a film stock may degrade beyond repair and possibly be lost entirely. (Add info about inspecting other media).

Condition Assessments

Condition assessments are procedures that are carried out by conservators or other collections care professionals to document the overall condition of an object. These assessments are necessary for all the types of media and technology associated with time-based media art. The assessments stay in the object's file and give future conservators insight into the the object's life history. They are performed upon intake of an object into a collection, before and after the object goes on loan, and as necessary. They make note of any physical issues that may be present, such as tears, stains, scratches, other damage, etc. Film is especially vulnerable to tears and warping, while DVDs and CDs scratch easily. The examiner may recommend treatment if necessary.

Further Documentation

Because time-based media has a forth dimension of time, not present in other types of works, additional documentation to understand the allographic nature of the media may be required, and is recommended. Such documents include the Iteration Report (as used at the Guggenheim Museum) or Variable Media Questionnaire (VMQ), developed as part of the Variable Media Initiative. The reports collect information about the nature or behavior of the art, so that future curators and conservators can also understand it from an artistic point of view, as well as a technical point of view. This allows museum professionals to recreate, or make a new iteration, of a particular time-based media artwork. Because a new viewing of a time-based work can only be an iteration, by making each viewing as close to the artist's desires as possible, the nature of the artwork is conserved. The reports collect information such as how to install the artwork, what the space (walls, floors, ceilings, additions) should look like and how it should be arranged, how equipment should be installed, and the technical set-up of the work. Each iteration will be dependent on the physical constraints of the room, so that no two installations will be completely alike. In the VMQ, an artist can order his or her preferences for for technical specifications and whether any technology other than the original is allowed to be used. The reports are an important means of understanding how to set-up a work and make it as close to the prior iterations as possible.

Research

The history of time-based media art is not a long one, compared to more traditional forms of art. Much research is still needed in this area in order to move toward standardization of practice.

Research Projects

Two major research projects into time-based media include the Guggenheim Museum's Variable Media Initiative and the Smithsonian's Time Based Media and Digital Art Working Group.

The Variable Media Initiative

The Guggenheim's research has led to the Variable Media Approach, and the Variable Media Questionnaire, a tool of the Variable Media Approach.

The Time Based Media and Digital Art Working Group

Treatment

Treatment methods of time-based media art include a mix of both traditional and new techniques. Not all of the work will fall to a conservator, because of the highly technical nature of some of the devices, "certain tasks have to be delegated to respective experts, such as media technicians, video engineers, programmers, film-lab professionals, service technicians, and similar specialists" [11]. The maintenance of the technology is an important part of the conservation process for many works of art.

Treatment of Physical Objects

Time-based media conservators will treat and maintain a variety of objects, including film reels, projectors, computers, TVs, and other types of technology. In cases of videotape and DVDs, migration of the work to another format will more likely be the case. Because there are so many types of media that support time-based media art, treatment of each type will vary. While the prevention of physical film degradation is important, the preservationist's main goal is to preserve the image, as the film itself often decays rapidly and beyond repair (see: Film Preservation). Film preservation falls into four categories: conservation, which is the protection of the original film artifact; duplication, which is the making of a surrogate copy; and restoration, which is the attempt to reconstruct a specific version of the film, which will include piecing together footage from all known sources [12]. Film restoration will involve the use of duplicates, not the originals. Duplication of an original to a new and stable film stock (a continuing process, as eventually the duplicate will degrade) and repairing tears in the physical film are common types of treatment for film stock. There is a growing need to understand digital processes of duplication as well. While much duplication still requires that film be moved to a new and stable film stock, digital has been advancing as a method of duplication, though many argue it should not be used alone as digital files are unproven in the long term (see again: Film Preservation).

In the case of technology, treatment will look more like maintenance and will be required to keep the object functional. Obsolescence of technology is a major concern as discussed under Storage and Maintenance of Physical Objects.

Education and Outreach

Access

Access is the process through which artistic content is shared with public, such as providing researchers access to materials for scholarly work. Museums will more likely lend copies for study purposes, though study of the original may be warranted at times.

Community Outreach

Festivals such as Portland's Time-Based Art Festival take place annually and are reflective of the general acceptance of time-based media art outside the walls of the museum.

Education and Training

Educational Programs

There are few conservation programs specific to time-based media art, but the University of the Arts in Bern, Switzerland offers an MA program for the Conservation of Modern Materials and Media. Programs that include some aspect of time-based media include The Selznick Graduate Program in Film and Media Preservation at the University of Rochester in New York and New York University's Moving Image Archiving and Preservation program. At UCLA, there is an M.A. in Moving Image Archive Studies. The latter three programs deal primarily in archival film preservation, which requires specialized training in a variety of film stocks. A film preservationist must be knowledgeable about and trained to work with many types of film. In a museum context, the film is more likely to be consumer sizes like super 8mm and 16mm, not the 35mm that is used in commercial film making, as they are the preferred medium of artist and amateur filmmakers. Typically, the 35mm stock will be more prevalent in a library or archive. Because of the few formalized education programs in time-based media, most conservators of time-based media art make their way there through a professional path.

Professional Training

The Independent Media Arts Preservation (IMAP) is a non-profit organization that offers training to professionals within time-based media art preservation to include workshops, cataloging training, public programs, one-on-one assessments, and technical assistance. [13]. They provide professionals with the IMAP Preservation Online Resource Guide.

Organizations and Professional Societies

AIC Electronic Media Group The Association of Moving Image Archivists

Resources

See also

References

  1. ^ Guggenheim Museum (n.d.). Establishing New Practices. Retrieved from http://www.guggenheim.org/new-york/collections/conservation/time-based-media/establishing-new-practices
  2. ^ a b Smithsonian Institution. (n.d.). Time-Based Media Art at the Smithsonian. Retrieved from http://www.si.edu/tbma/about
  3. ^ a b c d e f g h i j k Iles, Chrissie and Huldisch, Henriette (2005). Keeping Time: On Collecting Film and Video Art in the Museum. In Collecting the New. Altshuler, Bruce (Ed.) NJ: Princeton University Press.
  4. ^ National Park Service (n.d.) Cold Storage. Retrieved from http://www.nps.gov/museum/coldstorage/html/intro1_1.html
  5. ^ a b IMAP. (2009). Preservation 101. Retrieved from www.imappreserve.org/pres_101/index.html
  6. ^ Laurenson, Pip (2005). The Management of Display Equipment in Time-based Media Installations. Tate Papers.
  7. ^ Variable Media Network (n.d.) Retrieved from http://www.variablemedia.net/e/welcome.html
  8. ^ Depocas, Alain (2003). The Guggenheim Museum and the Daniel Langlois Foundation: The Variable Media Network. Retrieved from http://www.fondation-langlois.org/html/e/page.php?NumPage=98
  9. ^ IMAP. Retrieved from http://www.eai.org/resourceguide/preservation/computer/basicquestions.html#SAVINGFILES
  10. ^ a b Smithsonian Institution (2010). Collaborations in Conserving Time-Based Art.
  11. ^ Guggenheim Museum (n.d.). Establishing New Practices. Retrieved from http://www.guggenheim.org/new-york/collections/conservation/time-based-media/establishing-new-practices
  12. ^ National Film Preservation Foundation (2004). The Film Preservation Guide: The basics for archives, libraries, and museums. San Francisco, CA: National Film Preservation Foundation.
  13. ^ IMAP. About. Retrieved from http://www.imappreserve.org/about/index.html