Jump to content

Petroleum coke: Difference between revisions

From Wikipedia, the free encyclopedia
Browse history interactively
← Previous editNext edit →
Content deleted Content added
VisualWikitext
→Calcined petroleum coke: Better formulated
→Fuel-grade coke: Does not mean anything in its current state
Line 21: Line 21:
Fuel-grade coke is classified as either sponge coke or shot coke morphology. While oil refiners have been producing coke for well over 100 years, the mechanisms that cause sponge coke or shot coke to form are not well understood and cannot be accurately predicted. In general, lower temperatures and higher pressures promote sponge coke formation. Additionally, the amount of [[heptane]] insolubles present and the fraction of light components in the coker feed contribute.
Fuel-grade coke is classified as either sponge coke or shot coke morphology. While oil refiners have been producing coke for well over 100 years, the mechanisms that cause sponge coke or shot coke to form are not well understood and cannot be accurately predicted. In general, lower temperatures and higher pressures promote sponge coke formation. Additionally, the amount of [[heptane]] insolubles present and the fraction of light components in the coker feed contribute.


While its high heat and low [[Fly ash|ash]] content make it a decent fuel for power generation in coal-fired [[boiler]]s, petroleum coke is high in [[sulfur]] and low in [[Volatile organic compound|volatile]] content, and this poses environmental (and technical) problems with its combustion. Its [[heat of combustion|gross calorific value]] (HHV) is nearly 8000 Kcal/kg which is twice the value of average coal used in electricity generation.<ref>{{cite web|title= Pet Coke |url=http://www.essar.com/article.aspx?cont_id=UhfGZmBNAZc= |accessdate=25 June 2017}}</ref> To meet current{{when|date=September 2017}} North American emissions standards, some form of [[desulfurization|sulfur]] capture is required. A common choice of sulfur recovering unit for burning petroleum coke is the [[SNOX process|SNOX Flue gas desulfurisation]] technology,<ref>[http://www.energystorm.us/Snox_Process_A_Success_Story-r149018.html "SNOX Process: A Success Story"] {{webarchive|url=https://web.archive.org/web/20090721122110/http://www.energystorm.us/Snox_Process_A_Success_Story-r149018.html |date=2009-07-21 }}, ''energystorm.us''. Cited therein: "Schoolbook, Chemistry 2000, Helge Mygind, {{ISBN|87-559-0992-2}}".</ref> which is based on the well-known [[WSA Process]]. [[Fluidized bed combustion]] is commonly used to burn petroleum coke. [[Gasification]] is increasingly used with this feedstock (often using gasifiers placed in the refineries themselves).
While its high heat and low [[Fly ash|ash]] content make it a decent fuel for power generation in coal-fired [[boiler]]s, petroleum coke is high in [[sulfur]] and low in [[Volatile organic compound|volatile]] content, and this poses environmental (and technical) problems with its combustion. Its [[heat of combustion|gross calorific value]] (HHV) is nearly 8000 Kcal/kg which is twice the value of average coal used in electricity generation.<ref>{{cite web|title= Pet Coke |url=http://www.essar.com/article.aspx?cont_id=UhfGZmBNAZc= |accessdate=25 June 2017}}</ref>. A common choice of sulfur recovering unit for burning petroleum coke is the [[SNOX process|SNOX Flue gas desulfurisation]] technology,<ref>[http://www.energystorm.us/Snox_Process_A_Success_Story-r149018.html "SNOX Process: A Success Story"] {{webarchive|url=https://web.archive.org/web/20090721122110/http://www.energystorm.us/Snox_Process_A_Success_Story-r149018.html |date=2009-07-21 }}, ''energystorm.us''. Cited therein: "Schoolbook, Chemistry 2000, Helge Mygind, {{ISBN|87-559-0992-2}}".</ref> which is based on the well-known [[WSA Process]]. [[Fluidized bed combustion]] is commonly used to burn petroleum coke. [[Gasification]] is increasingly used with this feedstock (often using gasifiers placed in the refineries themselves).


==Calcined petroleum coke==
==Calcined petroleum coke==

Revision as of 10:38, 23 July 2018

This article is about fuel coke derived from petroleum. For fuel coke derived from coal, see Coke (fuel).
Petroleum coke

Petroleum coke, abbreviated coke or petcoke, is a final carbon-rich solid material that derives from oil refining, and is one type of the group of fuels referred to as cokes. Petcoke is the coke that, in particular, derives from a final cracking process—a thermo-based chemical engineering process that splits long chain hydrocarbons of petroleum into shorter chains—that takes place in units termed coker units.[1] (Other types of coke are derived from coal.) Stated succinctly, coke is the "carbonization product of high-boiling hydrocarbon fractions obtained in petroleum processing (heavy residues)."[2] Petcoke is also produced in the production of synthetic crude oil (syncrude) from bitumen extracted from Canada’s oil sands and from Venezuela's Orinoco oil sands.[3][4]

In petroleum coker units, residual oils from other distillation processes used in petroleum refining are treated at a high temperature and pressure leaving the petcoke after driving off gases and volatiles, and separating off remaining light and heavy oils. These processes are termed "coking processes", and most typically employ chemical engineering plant operations for the specific process of delayed coking.

A delayed coking unit.A schematic flow diagram of such a unit, where residual oil enters the process at the lower left (see →), proceeds via pumps to the main fractionator (tall column at right), the residue of which, shown in green, is pumped via a furnace into the coke drums (two columns left and center) where the final carbonization takes place, at high temperature and pressure, in the presence of steam.

This coke can either be fuel grade (high in sulfur and metals) or anode grade (low in sulfur and metals). The raw coke directly out of the coker is often referred to as green coke.[1] In this context, "green" means unprocessed. The further processing of green coke by calcining in a rotary kiln removes residual volatile hydrocarbons from the coke. The calcined petroleum coke can be further processed in an anode baking oven in order to produce anode coke of the desired shape and physical properties. The anodes are mainly used in the aluminium and steel industry.

Petcoke is over 90 percent carbon and emits 5 to 10 percent more carbon dioxide (CO2) than coal on a per-unit-of-energy basis when it is burned. As petcoke has a higher energy content, petcoke emits between 30 and 80 percent more CO2 than coal per unit of weight.[4] The difference between coal and coke in CO2 production per unit of energy produced depends upon the moisture in the coal, which increases the CO2 per unit of energy – heat of combustion) and on the volatile hydrocarbons in coal and coke, which decrease the CO2 per unit of energy.

Types of petroleum coke

There are at least four basic types of petroleum coke, namely, needle coke, honeycomb coke, sponge coke and shot coke. Different types of petroleum coke have different microstructures due to differences in operating variables and nature of feedstock. Significant differences are also to be observed in the properties of the different types of coke, particularly ash and volatile matter contents.[5]

Needle coke, also called acicular coke, is a highly crystalline petroleum coke used in the production of electrodes for the steel and aluminium industries and is particularly valuable because the electrodes must be replaced regularly. Needle coke is produced exclusively from either FCC decant oil or coal tar pitch.

Honeycomb coke is an intermediate coke, with ellipsoidal pores that are uniformly distributed. Compared to needle coke, honeycomb coke has a lower coefficient of thermal expansion and a lower electrical conductivity.[5]

Fuel-grade coke

Fuel-grade coke is classified as either sponge coke or shot coke morphology. While oil refiners have been producing coke for well over 100 years, the mechanisms that cause sponge coke or shot coke to form are not well understood and cannot be accurately predicted. In general, lower temperatures and higher pressures promote sponge coke formation. Additionally, the amount of heptane insolubles present and the fraction of light components in the coker feed contribute.

While its high heat and low ash content make it a decent fuel for power generation in coal-fired boilers, petroleum coke is high in sulfur and low in volatile content, and this poses environmental (and technical) problems with its combustion. Its gross calorific value (HHV) is nearly 8000 Kcal/kg which is twice the value of average coal used in electricity generation.[6]. A common choice of sulfur recovering unit for burning petroleum coke is the SNOX Flue gas desulfurisation technology,[7] which is based on the well-known WSA Process. Fluidized bed combustion is commonly used to burn petroleum coke. Gasification is increasingly used with this feedstock (often using gasifiers placed in the refineries themselves).

Calcined petroleum coke

Calcined petroleum coke (CPC) is the product from calcining petroleum coke. This coke is the product of the coker unit in a crude oil refinery. The calcined petroleum coke is used to make anodes for the aluminium, steel and titanium smelting industry. The green coke must have sufficiently low metals content in order to be used as anode material. Green coke with this low metals content is referred to as anode-grade coke. When green coke has too high metals content, it is not calcined and is used for as fuel-grade coke in furnaces.

Desulfurization of petcoke

A high sulfur content in petcoke reduces its market value and may prevent its use as fuel due to restrictions on sulfur oxides emissions for environmental reasons. Methods have thus been proposed to reduce or eliminate the sulfur content of petcoke. Most of them involve the desorption of the inorganic sulfur present in the pores or surface of the coke, and the partition and removal of the organic sulfur attached to the aromatic carbon skeleton.

Potential petroleum desulfurization techniques can be classified as follows:[8]

  1. Solvent extraction
  2. Chemical treatment
  3. Thermal desulfurization
  4. Desulfurization in an oxidizing atmosphere
  5. Desulfurization in an atmosphere of sulfur-bearing gas
  6. Desulfurization in an atmosphere of hydrocarbon gases
  7. Hydrodesulfurization

As of 2011 there was no commercial process available to desulfurize petcoke.[9]

Storage, disposal, and sale

Nearly pure carbon, petcoke is a potent source of carbon dioxide if burned.[10]

Petroleum coke may be stored in a pile near an oil refinery pending sale. For example, in 2013 a large stockpile owned by Koch Carbon near the Detroit River was produced by a Marathon Petroleum refinery in Detroit which had begun refining bitumen from the oil sands of Alberta in November 2012. Large stockpiles of petcoke also existed in Canada as of 2013, and China and Mexico were markets for petcoke exported from California to be used as fuel. As of 2013 Oxbow Corporation, owned by William I. Koch, was a major dealer in petcoke, selling 11 million tons annually.[11]

In 2017 a quarter of US exports of the fuel went to India, an Associated Press investigation found. In 2016 this amounted to more than eight million metric tons, more than 20 times as much as in 2010.[12] India's Environmental Pollution Control Authority tested imported petcoke in use near New Delhi, and found sulfur levels 17 times the legal limit.[12]

The International Convention for Prevention of Pollution from Ships (MARPOL 73/78), adopted by the IMO, has mandated that marine vessels shall not consume residual fuel oils (bunker fuel, etc) with a sulfur content greater than 0.1% from the year 2020.[13] Nearly 38% of residual fuel oils are consumed in the shipping sector. In the process of converting excess residual oils into lighter oils by coking processes, pet coke is generated as a byproduct. Pet coke availability is expected to increase in the future due to falling demand for residual oil. Pet coke is also used in methanation plants to produce synthetic natural gas, etc. in order to avoid a pet coke disposal problem.[14]

Health hazards

Petroleum coke is sometimes a source of fine dust, which can get through the filtering process of the human airway and lodge in the lungs and cause serious health problems. However, studies have shown that petroleum coke itself has a low level of toxicity and there is no evidence of carcinogenicity.[15][16]

Petroleum coke can contain vanadium, a toxic metal. Vanadium was found in the dust collected in occupied dwellings near the petroleum coke stored next to the Detroit River. Vanadium is toxic in tiny quantities, 0.8 micrograms per cubic meter of air, according to the EPA.[17]

According to multiple EPA studies and analyses, petroleum coke has a low health hazard potential in humans. It does not have any observable carcinogenic, developmental, or reproductive effects. During animal case studies repeated-dose chronic inhalation did show respiratory inflammation due to dust particles, but not specific to petroleum coke.[18]

See also

References

  1. ^ a b Petroleum coke on the website of the IUPAC Compendium of Chemical Terminology
  2. ^ http://goldbook.iupac.org/P04522.html
  3. ^ "What Is Petcoke?". Retrieved 17 March 2017.
  4. ^ a b "Petroleum Coke: The Coal Hiding in the Tar Sands", OilChange International priceofoil.org January, 2013.
  5. ^ a b Hassan Al-Haj Ibrahim, Desulfurization of petroleum coke, Research report, University of Pittsburgh, Pittsburgh, 1990.
  6. ^ "Pet Coke". Retrieved 25 June 2017.
  7. ^ "SNOX Process: A Success Story" Archived 2009-07-21 at the Wayback Machine, energystorm.us. Cited therein: "Schoolbook, Chemistry 2000, Helge Mygind, ISBN 87-559-0992-2".
  8. ^ Desulfurization of Petroleum Coke: A Review, Hassan Al-Haj-Ibrahim and Badie I. Morsi, Industrial and Engineering Chemistry Research, 1992, 31, 1835–1840.
  9. ^ Agarwal, P.; Sharma, D.K. (2011). "Studies on the Desulfurization of Petroleum Coke by Organorefining and Other Chemical and Biochemical Techniques Under Milder Ambient Pressure Conditions". Petroleum Science and Technology. 29 (14): 1482–1493. doi:10.1080/10916460902839230.
  10. ^ Stockman, Lorne (January 2013). "Petroleum Coke: The Coal Hiding in the Tar Sands". Oil Change International. Retrieved May 18, 2013.
  11. ^ Austin, Ian (May 17, 2013). "A Black Mound of Canadian Oil Waste Is Rising Over Detroit". The New York Times. Retrieved May 18, 2013..
  12. ^ a b Tammy Webber; Katy Daigle (2017). "US exporting dirty fuel to pollution-choked India". San Jose Mercury-News. Bay Area News Group. Associated Press. p. A4. {{cite web}}: Missing or empty |url= (help)
  13. ^ "Implications of Residual Fuel Oil Phase Out" (PDF). Retrieved 17 March 2017.
  14. ^ "Reliance Jamnagar pet coke gasification project" (PDF). Retrieved 15 January 2017.
  15. ^ https://www.epa.gov/petroleum-coke-chicago/health-effects-petroleum-coke
  16. ^ "U.S. world's biggest supplier of heavy oil refining byproduct". Star-Advertiser. Honolulu. Associated Press. December 1, 2017. Retrieved December 1, 2017.
  17. ^ Detroit Free Press, "HEALTH CONCERNS GO BEYOND FLINT WATER " by Keith Matheny; Sunday March 27, 2016; page A1
  18. ^ Andrews, Anthony (2013). "Petroleum Coke: Industry and Environmental Issues". Congressional Research Service: 9 – via nam.org.
Wikimedia Commons has media related to Petroleum coke.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Petroleum_coke&oldid=851595547"