Jump to content

Plunger lift

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by Citation bot (talk | contribs) at 20:32, 6 October 2021 (Add: title. Changed bare reference to CS1/2. | Use this bot. Report bugs. | Suggested by BrownHairedGirl | Linked from User:BrownHairedGirl/Articles_with_bare_links | #UCB_webform_linked 698/1037). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
The stages of operation of a plunger lift.

A plunger lift is an artificial lift method of deliquifying a natural gas well. A plunger is used to remove contaminants from productive natural gas wells, such as water (in liquid, mist, or ice forms), sand, oil and wax.

The basics of the plunger is to open and close the well shutoff valve at the optimum times, to bring up the plunger and the contaminants and maximize natural gas production. A well without a deliquification technique will stop flowing or slow down and become a non-productive well, long before a properly deliquified well.[1]

The plunger lift has low energy cost, low environmental impact, low capital investment and low maintenance cost. Modern wellhead controllers offer a variety of criteria to control the plunger. The original controllers were just timers, with fixed open and close cycles.

Measuring the various pressures in the system allows intelligent and reactive control. The pressures often measured are casing, tubing, line, and differential (DP). The other items measured are plunger arrival times, flow rates, temperatures and status of various auxiliary equipment: oil tank level, compressor status.

Open Well Criteria

[edit]
  • Plunger Drop Timer - Minimum close time to allow the Plunger to reach the bottom.
  • Tube - Line Pressure
  • Casing - Line Pressure
  • Casing - Tubing Pressure
  • Load Ratio (Casing-Tubing) / (Casing - Line)
  • Foss and Gaul Equation[2]
  • Tubing Pressure
  • Casing Pressure
  • Static Pressure
  • External Variables

Close Well Criteria

[edit]
  • Flow Time
  • After Flow Timer
  • Turner/Coleman Flow Rate
  • Load Ratio
  • DP (Differential)
  • Flow Rate
  • Tubing - Line Pressure
  • Casing - Tubing Pressure
  • Casing Pressure
  • Static Pressure
  • Tubing Pressure
  • Line Pressure

Notes

[edit]
  1. ^ "My World@Mail.Ru: Stay in touch with your classmates and friends".
  2. ^ Foss, D.L., and Gaul, R.B., "Plunger Lift Performance Criteria with Operating Experience - Ventura Avenue Field", (API Drilling and Production Practice,) 1965.

References

[edit]

Patents

[edit]