HP-150
 | |
| Manufacturer | HP |
|---|---|
| Type | A single-unit touchscreen personal computer (depicted: HP 150-II) |
| Release date | November 1983 |
| Introductory price | $2795 MSRP[1] |
| Discontinued | Yes |
| Media | Two 270 KB floppy drives |
| Operating system | MS-DOS or CP/M-86 |
| CPU | Intel 8088 @ 8 MHz |
| Memory | 256 KB RAM, 160 KB ROM (DRAM) |
| Display | Built-in 9" Sony CRT • Text: 80 columns, 27 lines • Bitmap: 512 × 390 pixels |
| Graphics | 6 KB SRAM (video) |
| Input | • Infrared emitters and detectors for touchscreen functionality • Keyboard |
| Connectivity | • Two RS-232 ports, with one supporting RS-422 • One 8-bit parallel multi-master interface bus: HP-IB, IEEE-488 standard |
HP-150 (aka HP Touchscreen or HP 45611A) was a compact, powerful and innovative computer made by Hewlett-Packard in 1983. It was based on the Intel 8088 CPU and was one of the world's earliest commercialized touch screen computers. Like other "workalike" IBM PC clones of the time, despite running customized MS-DOS versions 2.01, 2.11 and 3.20, the machine was not IBM PC DOS compatible. Its 8088 CPU, rated at 8 MHz, was faster than the 4.77 MHz CPUs used by the IBM PC of that period. Using add-on cards, main memory could be increased from 256 KB to 640 KB. However, its mainboard did not have a slot for the optional Intel 8087 math coprocessor due to space constraints. An HP-150 with an optional hard disk was called HP Touchscreen MAX.
The computer's screen was a 9-inch Sony CRT surrounded by infrared emitters and detectors which detected the position of any non-transparent object that touched the screen. In the original HP-150, these emitters and detectors were placed within small holes located on the inside of the monitor's bezel (which resulted in the bottom series of holes sometimes filling with dust, causing the touchscreen to fail until the dust was vacuumed from the holes).
Like the original Macintosh, HP-150 was packaged with the CRT display as a single unit, and made use of 3½-inch floppy disks. Unlike the Mac, however, HP-150 had no internal floppy drive; the machine sat atop the phone book-sized 9121D[2] dual 3½-inch floppy (76 mm high, 325 mm wide, 285 mm deep) or similarly sized hard disk devices, connected by HP-IB.
Invisible to the user, the HP-150 runs "Terminal Operating System" ("TOS", code-named "Magic" during development). This operating system generally runs only two tasks: the terminal emulator and MST (which is Microsoft DOS).[3]
Hardware
Display
Display resolutions:
- Text: 80 columns × 27 lines (720 × 378 pixels)
- Bit-map: 512 × 390 pixels
- Separate plane for text and graphics
- Monitor sensor grid: 40 (h) × 24 (v)
HP-150's touch screen sensor grid is quite coarse. Its resolution is only two characters wide. Used mainly for rough cursor positioning and function key control, it could not be used to draw pictures.
Processor unit
- Optional internal thermal printer HP 2647A (fax roll)
- Communication ports:
Storage
- Supported HP-IB attached storage:
| HP Model | Command Set |
# FDD | FDD type |
Sides | FDD capacity (each) |
# HDD | HDD capacity | Notes |
|---|---|---|---|---|---|---|---|---|
| HP 82901M | Amigo | 2 | 5.25" | DS | 270 KB | 0 | — | Add-on only |
| HP 82902M | Amigo | 1 | 5.25" | DS | 270 KB | 0 | — | Add-on only |
| HP 9121D | Amigo | 2 | 3.5" | SS | 270 KB | 0 | — | — |
| HP 9121S | Amigo | 1 | 3.5" | SS | 270 KB | 0 | — | Add-on only |
| HP 9122D | SS/80 | 2 | 3.5" | DS | 710 KB | 0 | — | — |
| HP 9122S | SS/80 | 1 | 3.5" | DS | 710 KB | 0 | — | Add-on only |
| HP 9123D | SS/80 | 2 | 3.5" | DS | 710 KB | 0 | — | HP-150 II only |
| HP 9125S | Amigo | 1 | 5.25" | DS | 360 KB | 0 | — | Add-on only. Not bootable |
| HP 9127S | Amigo | 1 | 5.25" | DS | 360 KB | 0 | — | Add-on only. Not bootable |
| HP 9133A | Amigo | 1 | 3.5" | SS | 270 KB | 1 | 5 MB | — |
| HP 9133B | Amigo | 1 | 3.5" | SS | 270 KB | 1 | 10 MB | — |
| HP 9133D | SS/80 | 1 | 3.5" | DS | 710 KB | 1 | 15 MB | — |
| HP 9133H | SS/80 | 1 | 3.5" | DS | 710 KB | 1 | 20 MB | Requires DOS 3.20 |
| HP 9133L | SS/80 | 1 | 3.5" | DS | 710 KB | 1 | 40 MB | Requires DOS 3.20 |
| HP 9133V | Amigo | 1 | 3.5" | SS | 270 KB | 1 | 5 MB | — |
| HP 9133XV | Amigo | 1 | 3.5" | SS | 270 KB | 1 | 15 MB | — |
| HP 9134A | Amigo | 0 | — | — | — | 1 | 5 MB | — |
| HP 9134B | Amigo | 0 | — | — | — | 1 | 10 MB | — |
| HP 9134H | SS/80 | 0 | — | — | — | 1 | 20 MB | Requires DOS 3.20 |
| HP 9134L | SS/80 | 0 | — | — | — | 1 | 40 MB | Requires DOS 3.20 |
| HP 9134V | Amigo | 0 | — | — | — | 1 | 5 MB | — |
| HP 9134XV | Amigo | 0 | — | — | — | 1 | 15 MB | — |
| HP 9153A | SS/80 | 1 | 3.5" | DS | 710 KB | 1 | 10 MB | — |
| HP 9153B | SS/80 | 1 | 3.5" | DS | 710 KB | 1 | 20 MB | Requires DOS 3.20 |
| HP 9153C | SS/80 | 1 | 3.5" | DS | 710 KB | 1 | 10/20/40 MB | Requires DOS 3.20 |
| HP 9154A | SS/80 | 0 | — | — | — | 1 | 10 MB | — |
| HP 9154B | SS/80 | 0 | — | — | — | 1 | 20 MB | Requires DOS 3.20 |
Reception
BYTE in November 1984 called HP-150 "an extremely flexible machine", but "difficult to program".[4]
Successors
The two-CPU HP-120 (aka HP 45600A)[5] Z80 CP/M machine also used the 9121 drives.
HP-150 II (aka HP 45849A)[6] replaced HP-150 in 1984. While still called HP Touchscreen II, the touchscreen was no longer standard, but rather a rarely-adopted option. The optional touchscreen bezel was superior to the original bezel, in that the emitters and detectors were now located behind a solid infrared-transparent plastic; thus removing the need to regularly clean the holes found in the original model.
HP-150 II had the same footprint as HP-150, but came in a larger housing to accommodate its 12-inch screen, but could no longer accommodate an internal printer. HP-150 II had four expansion slots available (as opposed to two), and could accommodate an optional 8087 co-processor board. There were some minor compatibility problems between HP-150 and HP-150 II in the video subsystem.
In 1985, HP introduced the Vectra, which InfoWorld stated was the company "responding to demands from its customers for full IBM PC compatibility". HP repositioned HP-150 as a workstation for the HP 3000 minicomputer.[7]
See also
References
- ^ "150 Touchscreen". Business Desktops/Calcs: 100 Series Selection. HP Computer Museum. Retrieved March 18, 2018.
- ^ "9121 Disc Drive". Peripheral Products: Storage Selection. HP Computer Museum. Retrieved March 18, 2018.
- ^ Pollero Wood, Laurie E.; Whelan, Charles H. (August 1984). "Operating System and Firmware of the HP150 Personal Computer" (PDF). Hewlett-Packard Journal. 35 (8): 9. Retrieved August 12, 2021.
- ^ Haas, Mark (November 1984). "The HP 150 Computer". BYTE. Vol. 9, no. 12. pp. 262–275. Retrieved 2015-02-14.
- ^ "120". Business Desktops/Calcs: 100 Series Selection. HP Computer Museum. Retrieved March 18, 2018.
- ^ "150 Touchscreen II". Business Desktops/Calcs: 100 Series Selection. HP Computer Museum. Retrieved March 18, 2018.
- ^ Petrosky, Mark (30 September 1985). "HP's Vectra Called PC AT 'Hybrid'". InfoWorld. Vol. 7, no. 39. p. 5. Retrieved 2015-02-20.
Bibliography
- HP 150 Personal Computer. Series 100. Hewlett Packard. September 1983. 5953-5846.
- Dolan, Richard P., ed. (August 1984). "HP 150 issue" (PDF). Hewlett-Packard Journal. 35 (8). Retrieved August 11, 2021.
- HP 150 Technical Reference Manual (PDF). HP 150 Personal Computers. Hewlett Packard. April 1984. 45625-90001.
- Lemmons, Phil; Robertson, Barbara (October 1983). "Product Preview: The HP 150". BYTE. Vol. 8, no. 10. pp. 36–50. Retrieved 2015-02-15.
- Lemmons, Phil; Robertson, Barbara (October 1983). "An Interview: The HP 150's Design-team Leaders". BYTE. Vol. 8, no. 10. pp. 51–58. Retrieved 2015-02-15.
- The Definitive HP150 Catalog. The 1991 Edition. Personalized Software
External links
- HP-150
- Hewlett-Packard HP-150
- HP's Virtual Museum: 6-views of the HP-150
- HP Computer Museum: 100 Series, also HP-150 Software
