Virtual security switch

Virtual Security Switch

A Virtual Security Switch is a software Ethernet switch with embedded security controls within it that runs within Virtual Environments such as VMWare, Citrix, Microsoft and Virtual Iron. The primary purpose of a Virtual Security Switch is to provide security measures such as isolation, control and content inspection between virtual machines.

Virtual Machines within enterprise server environments began to gain popularity in 2005 and quickly started to become a standard in the way companies deploy servers and applications. In order to deploy these servers within a virtual environment, a virtual network needed to be formed and as a result companies such as VMWare created a resource called a Virtual Switch. The purpose of the Virtual Switch was to provide network connectivity within the Virtual Environment so that virtual machines and applications could communicate within the virtual network as well as to the physical network.

This concept of a Virtual Network introduced a number of problems as it related to security within virtual environment due to only having virtual switching technology within the environment and not security technologies. Unlike physical networks that have switches with ACL’s, Firewalls, Anti-Virus Gateways, or Intrusion Prevention devices, the Virtual Network was very wide open. The Virtual Security Switch concept is one where switching and security have joined forces so that security controls could be placed within the virtual switch and provide per port inspection and isolation within the virtual environment. This concept allowed security to get as close as possible to the end points that it intends to protect without having to reside on the end points (Host Based on Virtual Machines) themselves.

By eliminating the need to deploy host based security solutions on virtual machines a significant performance improvement can be achieved when deploying security within the virtual environment. This is because Virtual Machines share computing resources (CPU, Memory, Disk, etc.) unlike physical servers that have dedicated resources. One example of understanding this is to picture 20 virtual machines running on a dual processor server and each virtual server having its own Host Based Firewall running on them. This would make up 20 firewalls using the same resources that the 20 virtual machines are using. This defeats the purpose of virtualization, which is to apply those resources to virtual servers not security applications. Deploying security centrally within the virtual environment is in a sense 1 firewall vs. 20 firewalls.

History

The concept of a Virtual Security Switch was introduced by John U. Peterson in 2006 while investigating how to bring security closer to servers within the datacenters of physical networks. John was VP of Product Management at Fortinet and later Chief Product Officer at Reflex Security and while at both companies John worked to bring security and switching together. John was successful in doing so at Reflex Security and introduced the industry’s first 10 gigabit Network Security Switch which had a port density to support 80 physical servers connected to it. By leveraging this knowledge in switching coupled with the firewall experience he obtained while serving as Worldwide Systems Engineering Director at NetScreen Technologies, John was able to quickly introduce a Virtual Security Switch with L2-L7 Firewall features along with network switching features. John then took this concept and adapted it to software that could run as a virtual appliance within environments such as VMWare and used the concept as a spring board to launch a company called Montego Networks that specializes in virtual environment security during the fall of 2007.