Jump to content

Talk:Washer (hardware)

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 71.35.250.121 (talk) at 04:05, 8 October 2008 (→‎More detailed description needed). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Aren't belleville washers lock washers too? I added Fender washer, but I'm not quite sure how to define it. Ortolan88 00:10, 22 Aug 2004 (UTC)

Yes, belleville washers are somtimes used as locking devices. But only in joints with low dynamic loads. A proper pre-load (or clamp-load) is one way to keep a bolted joint from coming loose, but belleville washers usually have lower pre-loads than bolts (1/4" grade 8 capscrew will have a pre-load of about 2800 lbf, and belleville washers for 1/4" hardware might have a compressed load of 50-1000 lbf).
Bellevilles are also used as pure springs. One example is a live load joint, where flexibility is designed in. In this case bellevilles are springs, maintaing a pre-load, but not working as the locking mechanism.
Another example is a joint that experiences a lot of thermal expansion and contraction. A belleville may supply the designed pre-load, but the bolt may have an additional locking mechanism (loctite, for example) that would fail without the belleville.
A fender washer is a flat washer with an oversized O.D. This type of washer distributes the capscrew's clamp-load over a greater area.

209.102.125.87 01:47, 22 Aug 2004 (UTC)

Tab-washers and cup-washers are also used for lock washers, but usually need modification of the part and sometimes the fastener. —Dmc6006 20:08, 22 Aug 2004 (UTC)

Just for the record, I knew what a fender washer was, I just didn't know what to say about it. I suppose the name is simple, "that which fends, or protects". Ortolan88 20:18, 22 Aug 2004 (UTC)

There is acommon British name for fender washers that I've heard but have forgotten, anyone know?? Pud 00:20, 23 Aug 2004 (UTC)

More detailed description needed

It would be useful to have an explanation of which circumstances, for instance, a washer is not needed.


I'd also like to see an explanation of what a lock washer is... it's not evident!

(And perhaps an explanation of when to use just a lockwasher, and when to use a lockwasher and a normal flat washer as well?) Jo5n 07:22, 12 September 2006 (UTC)[reply]

Also, why are they called washers? Were they once used to wash things or something?

Phenolic?

Phenolic is not a type of washer; it's a material. —The preceding unsigned comment was added by 68.160.170.31 (talk) 10:48, August 23, 2007 (UTC)