Electrology
Electrology is the practice of electrical depilation to permanently remove human hair. The actual process of removing the hair is referred to as electrolysis. The practitioner slides a hair-thin metal probe into each hair follicle. Proper insertion does not puncture the skin. Electricity is delivered to the follicle through the probe, which causes localized damage to the areas that generate hairs, either through the formation of caustic lye (galvanic method), overheating (thermolysis method), or both (blend method).
Modalities
Three methods or "modalities" are used in electrology. Galvanic, Thermolysis, and Blend all have their own merits, and one method is not better than another. The success depends on the skill of the electrologist, the type of hair being removed, the condition of the skin and the pain threshold of the client. All three methods, when properly performed, can be thorough at destroying the hair matrix cells, and leaving follicles incapable of regrowing hair.
Galvanic
This modality is named after Luigi Galvani and uses a person's body as an electrolytic cell. Galvanic electrolysis was first reported in the medical literature by ophthalmologist Charles Michel in 1875 to remove ingrown eyelashes in patients with trichiasis. [1] A galvanic epilator is essentially a positive ground power supply that delivers 0-3 milliamperes through the body. The follicular probe is the cathode of an electrolytic cell. Sodium hydroxide formed at the cathode by the process of chemical electrolysis kills the hair matrix cells. Modern galvanic epilators automatically adjust the voltage to maintain constant current.
Thermolysis
Another method is known as thermolysis, RF, shortwave or diathermy. Thermolysis was developed in the 1920s and first reported in medical literature by Henri Bordier. [2] A thermolytic epilator is essentially a radio transmitter, usually with an output of about 0-8 watts at a frequency of 13.56 MHz. RF energy emanates from the probe tip to tissue within about a millimeter. Thermolysis works by heating the hair matrix cells to about 48°C (118.4° Degree Fahrenheit), causing electrocoagulation.
Blend
Galvanic and thermolysis are often combined in a method known as blend, developed by Arthur Hinkel in 1948, which uses both RF and direct current, combining many of the advantages of galvanic and thermolysis. [3] All three of these methods use a metal probe 50 to 150 µm (0.002 to 0.006 inches) in diameter which is inserted into the hair follicle to the depth of the dermal papilla or hair matrix, which is the site of formation of hair from highly mitotic and keratinized cells.
Treatment duration
Most practitioners will advise that complete removal of facial hair takes between 1 and 4 years, with an average treatment length of 2 years.[4]
Status of profession
In the United States, electrolysis is regulated in many states, requiring training and licensure.
Electrolysis as a profession faced new competition in the 1990s after laser hair removal was developed and promoted as a quicker and easier way to remove hair permanently. However, electrolysis regained lost popularity after the Food and Drug Administration declared laser and similar devices can only claim to reduce hair growth, not permanently remove it. [5]
See also
References
- ^ Michel CE. Trichiasis and distichiasis; with an improved method for radical treatment. St. Louis Clinical Record, 1875 Oct; 2:145-148
- ^ Bordier H. Noveau traitment de l'hypertrichose par la diathermie. Vie Med., 1924, 5:561
- ^ Hinkel AR, Lind RW (1968). Electrolysis, Thermolysis and the Blend: the principles and practice of permanent hair removal.Los Angeles, CA: Arroway Publishers, ISBN 0-9600284-1-2
- ^ Transsexual road map - How long will electrolysis take?
- ^ U.S. Food and Drug Administration (May 17, 2002). Laser Facts.