Eckehard Specht
 |
| The topic of this article may not meet Wikipedia's notability guideline for academics. (March 2010) |
Eckehard Specht | |
|---|---|
| File:E.Specht.JPG | |
| Occupation | Professor, |
| Years active | 1992 - present |
| Spouse | Dr. Eschler Brigette |
Eckehard Specht [1] is a professor in Otto von Guericke University, Magdeburg, Germany. He belongs to Institute of Fluid Dynamics and Thermodynamics (ISUT) department. His specializations are Combustion technology, heat and mass transfer, chemical process engineering, global warming, and ceramic materials.
He has obtained his PhD in Heat transfer from TU Clausthal [2]. After that, he did the habilitation in the same university. He moved to OVG university, magdeburg. He has published 72 peer-reviewed papers, as listed in Scopus, the most cited are
- Liu, X.Y., Specht, E. "Mean residence time and hold-up of solids in rotary kilns" (2006) Chemical Engineering Science, 61 (15), pp. 5176-5181. Cited 9 times.
- Pietzsch, R., Brzoza, M., Kaymak, Y., Specht, E., Bertram, A., "Minimizing the distortion of steel profiles by controlled cooling. (2005) Steel Research International, 76 (5), pp. 399-407. Cited 9 times..":
- Mellmann, J., Specht, E., Liu, X."Prediction of rolling bed motion in rotating cylinders" (2004) AIChE Journal, 50 (11), pp. 2783-2793. Cited 9 times.
PhD Guidances
He consistently maintains more than 15 PhD students. More than 20 students finished their research study successfully. In general, he likes to work with foriegn students. The present PhD students are listed below:
| Name | Country | Year | Topics |
|---|---|---|---|
| Yogesh Sonavane | India | 2006-2010 | Heat transfer in Rotary kilns |
| Ashok Kumar Nallathambi | India | 2007-2010 | Thermo-mechanical simulation of DC casting |
| Umair Alam | Pakistan | 2007-2011 | Experimental analysis of metal Quenching |
| zhiguo Xu | China | 2007-2010 | CFD analysis of Shaft kiln |
| Nadine Lorenz | Germany | 2007-2010 | Global warming |
| Duc Hai Do | Vietnam | 2007-2010 | Mathematical modeling of Shaft kiln lime calcination |
| Meng Ping | China | 2007-2010 | Energy saving in brick manufacturing |
| Khalid H M Abdalrahman | Eygpt | 2008-2012 | Spray cooling |
| Magda El-Fakharany | Eygpt | 2008-2011 | Coal combustion |
| Hassan Fawzy Elattar | Eygpt | 2009-2013 | CFD analysis of rotary kiln |
| Fabian Herz | Germany | 2009-2012 | Heat transfer in rotary kiln |
| P C Gourisankar Sandaka | India | 2009-2012 | CFD analysis of Shaft kiln |
| Koteswara rao Sunkara | India | 2009-2012 | CFD analysis of rotary kiln |
| Hassanein Refaey | Eygpt | 2009-2013 | CFD |
| Mohammed Al-Fakheri Tariq | Iraq | 2009-2013 | CFD |
References
 | This article needs additional or more specific categories. (March 2010) |