Jump to content

Aston Martin AMR-One

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Mulsanne253 (talk | contribs) at 15:54, 12 April 2011. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Aston Martin AMR-One
CategoryLe Mans Prototype LMP1
ConstructorAston Martin Racing
(Prodrive)
Technical specifications[1]
ChassisCarbon fibre monocoque
Suspension (front)Double wishbone with push rod Koni dampers, 3rd spring/damper, front ARB
Suspension (rear)Double wishbone with adjustable Koni dampers and 3rd spring/damper
Length4,640 mm (182.7 in)
Width1,990 mm (78.3 in)
Wheelbase2,930 mm (115.4 in)
EngineAston Martin 2,000 cc (120 cu in) straight six, turbocharged, mid-engined, longitudinally mounted
TransmissionXtrac 6-speed sequential manual
WeightAppr. 900 kg (2,000 lb)
TyresMichelin
Competition history
Notable entrantsUnited Kingdom Aston Martin Racing
Notable driversGermany Stefan Mücke
United Kingdom Darren Turner
Mexico Adrián Fernández
Switzerland Harold Primat
United Kingdom Andy Meyrick
Debut2011 6 Hours of Castellet

Development

The Aston Martin AMR-One is a Le Mans Prototype sports car built by Prodrive's Aston Martin Racing arm. To meet the new regulations bought in by the ACO for endurance racing, the AMR-One is powered by a downsized, 2.0 litre turbocharged straight six petrol engine and also features a blade-fin behind the cockpit.[1] The AMR-One is build around a light carbon fibre monocoque chassis with a new open top bodywork, opposite to the Peugeot-Audi trend of closed car.

The Aston Martin has a very high belt-line, broad shapes and few surface breaks. The front of the car is designed to develop minimal downforce and to force as much air into the ducts. The air then moves through the car instead of over the top. There are numerous ducts inside the high bodywork, one for brake cooling, 2 through the side vents and 1 for rear gearbox cooling. One air scoop is in place to feed the turbocharger. 2 side ducts on the rear of the car are for rear-brake cooling. The exhaust exits at the bottom of the vertical fin.

Racing History

2011

Six AMR-Ones are expected to be built, with Aston Martin Racing participating in several international endurance events in 2011, including the 24 Hours of Le Mans.[1] At the 6 Hours of Castellet, the new AMR-One qualified 5 seconds behind the Pescarolo. In the race things took a downturn and the AMR-One finished way down the order.

References

  1. ^ a b c "Aston Martin AMR-One". Aston Martin. Retrieved 2011-03-08.