Jump to content

ArmaLite AR-50

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by JohnC76 (talk | contribs) at 20:55, 2 November 2012 (→‎References). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

ArmaLite AR-50
TypeBolt action rifle
Place of origin United States
Production history
Designed1997 - 2012
ManufacturerArmalite
Produced1999[1] - Present
VariantsArmalite AR-30 (smaller caliber)
Specifications
Mass34 lb (15.5 kg)
Length59.5 in (1511 mm)

Cartridge.50 BMG & .416 Barrett
Caliber12.7 mm (.50 in) & .416 Barrett
ActionBolt action
Maximum firing range2,430 meters (2,657 yards) with proper optics
Feed system1 bullet[2]
SightsCan use any with Picatinny railing

The ArmaLite AR-50 is a single shot bolt action rifle manufactured by ArmaLite.

Design

The AR-50 rifle utilizes weight and a large fluted muzzle brake to provide very mild recoil. The AR-50 weighs approximately 34 pounds and is a single shot bolt action rifle. The barrel is extremely thick and rigid to minimize the "whip" effect of rifle barrels which flex when fired.


The receiver features Armalite's unique octagonal design which strengthens the receiver against flexing. The receiver is bedded to the V-shaped stock while the barrel is free floated above the forend. The three piece AR-50 stock is constructed from aluminum and features an extruded forend, machined skeleton butt stock with removable and vertically adjustable butt plate.


This rifle has been recently updated to the AR50-A1B with smoother action, attractive new bolt stop, reinforced muzzle brake, and even greater strength than the original AR-50. The AR50-A1B is designed to be an economical answer for the challenges of long range shooting. The AR-50A1B is amazingly accurate and with its massive fluted muzzle brake, it has a very gentle recoil. The available rifle configurations are: AR-50A1B chambered for standard .50 BMG, AR50-A1BNM Chambered for .50 BMG Match Grade Ammunition, and AR50-A1B-416 chambered for .416 Barrett.


The current specs on the AR50-A1B 50 BMG are:


  • Model: AR-50A1B chambered for standard .50 BMG Ammunition.
  • Caliber: .50 BMG
  • Barrel: 30" Chrome moly, 8 Groove
  • Rifling Twist: RH 1:15"
  • Muzzle Device: Highly Efficient Multi-Flute Recoil Check, Very Moderate Felt Recoil. Threading: 1"-14
  • Upper Receiver: Modified Octagonal Form, Grilled & Slotted for Mil STD Scope Rail with Boss to Engage Cross-Slot on Receiver
  • Bolt: Triple Front Locking Lug
  • Ejector: Spring Loaded Plunger, Automatic Ejection
  • Extractor: Sako Type
  • Trigger: Schilen Standard Single Stage, Approximate 5 lbs Pull
  • Stock: 3 Section Stock: Extruded Forend, Machined Grip with Vertical Grip, Forged and Machined Removable Buttstock
  • Buttplate: Vertically Adjustable, Specially Built for Heavy Calibers
  • Overall Length: 58.5" Without Buttstock: 49 3/4 inches
  • Weight: 34.8 lbs
  • Finish: Hard Anodized Aluminum, Manganese Phosphated Steel
  • Accuracy: 7" - 8" @ 1000 yds
  • Included with Rifle: 15 Minute Sight Base, Owners Manual, Ear Plugs, Limited Lifetime Warranty
  • MSRP is $3,359.00 EA

_________________________________________________________________________________________________

Specs on the new AR50-A1B-416 are:


This rifle is just like the AR-50A1, but chambered and re-barreled to accept the .416 Barrett cartridge. Because of that, the AR-50A1-.416 Barrett boasts the same ArmaLite patented V-Lock™ Bedding Wedge and V-Block Stock that assure absolute strength and repeatability for superb accuracy. The aluminum stock reinforces the receiver like a bench-rest sleeve.


Added to all of that is the famous .416 Barrett cartridge, which contains a .416 caliber projectile capable of sustaining supersonic speeds out to the 2,500 yards, which is the key to achieving long range accuracy. The .416 Barrett cartridge uses a lighter, narrower bullet that was designed using low supersonic drag equations and results in a significantly high muzzle velocity and exceptional ballistic performance.


Independent testing has proven the ArmaLite AR-50A1 muzzle brake to be the best in the industry for both recoil control and accuracy. The AR-50A1-416 has the exact same muzzle brake. The brake scrapes away turbulent muzzle gasses and lets the bullet break into clean air for amazing accuracy. The soft recoil means even the smallest of shooters, or the most recoil-sensitive, will enjoy shooting the rifle.


THE AR-50A1-416 IS LEGAL TO SELL AND OWN IN THE STATE OF CALIFORNIA.


  • Caliber: 416 Barrett
  • Barrel: 30" Chrome Moly, 8 Groove
  • Rifling Twist: RH 1:12"
  • Muzzle Device: Highly Efficient Muzzle Brake
  • Trigger: Single Stage Trigger
  • Overall Length: 58.5"
  • Weight: 34.7 LBS
  • Accuracy: TBA
  • Included with Rifle: 15 Minute Sight Base, Owners Manual, Ear Plugs, Limited Lifetime Warranty
  • MSRP: $3,359.00 EA

____________________________________________________________________________________________________


The AR50-A1BNM "National Match"


ArmaLite introduces the AR-50A1 National Match. The AR-50A1 National Match is similar to our standard AR-50A1 with some VERY important differences. The AR-50A1 NM is produced from selected components: The National Match’s 33 inch barrel is three inches longer than the standard AR-50A1’s barrel. The barrel has eight flutes. The flutes help with cooling and reduce unnecessary weight while maintaining accuracy-enhancing stiffness. The barrel has a 50 BMG Match chamber instead of a standard military chamber. The result: sub MOA accuracy.


The AR50-A1BNM a “Skid System” that’s meant for serious match use and comes standard. The ArmaLite Skid System provides rests on the rifle that are parallel with the bore of the rifle so when it recoils, it will recoil straight back. This has been requested by match shooters. The front skid attaches to the slot in the forestock similar to the way bipod rails are attached. The rear skid attaches to the buttstock. Armalite developed the Skid System without modification to the AR-50A1’s original parts so the system can be used by shooters who already own an AR-50A1 and want to use their original stock with NO MODIFICATIONS.


The heart of the rifle is its metallic stock-to-action interface. The patented V-Lock™ Bedding Wedge and V-Block Stock assure absolute strength and repeatability for superb accuracy. The aluminum stock reinforces the receiver like a bench-rest sleeve.


It’s not just the bedding that improves accuracy. Independent testing has proven the AR-50A1 muzzle brake to be the best in the industry for both recoil control and accuracy. It scrapes away turbulent muzzle gasses and lets the bullet break into clean air for amazing accuracy.

AR50-A1BNM Specs

  • Caliber: .50 BMG
  • Barrel: 33" Chrome Moly, 8 Groove
  • Rifling Twist: RH 1:15" TWIST
  • Muzzle Device: Highly Efficient Muzzle Brake
  • Upper Receiver: Modified Octagonal Form, Drilled and Slotted for Scope Rail
  • Bolt: Extended Triple Front Locking Lugs
  • Extractor: SAKO TYPE
  • Trigger: Single Stage
  • Stock: 3 Section: Extruded Forend, Machined Grip Frame with Vertical Grip, Forged and Machined Removable Butt-Stock, Adjustable Cheek Piece
  • Overall Length: 61.5"
  • Weight: 33.6 LBS
  • Accuracy: Sub 1" MOA
  • Included with Rifle: Owner's Manual, 15 Minute Rail, and Limited Lifetime Warranty


  • MSRP: $4,230.00 EA


References

  1. ^ AR50 Press Release from Internet Archive. Retrieved on November 12, 2007.
  2. ^ AR50 Page from Internet Archive. Retrieved on November 12, 2007.
 3. ArmaLite AR50A1-416

See also

External links