One-time password
A one-time password (OTP) is a password that is valid for only one login session or transaction. OTPs avoid a number of shortcomings that are associated with traditional (static) passwords. The most important shortcoming that is addressed by OTPs is that, in contrast to static passwords, they are not vulnerable to replay attacks. This means that a potential intruder who manages to record an OTP that was already used to log into a service or to conduct a transaction will not be able to abuse it, since it will be no longer valid. On the downside, OTPs are difficult for human beings to memorize. Therefore they require additional technology in order to work.
How OTPs are generated and distributed
OTP generation algorithms typically make use of pseudorandomness or randomness. This is necessary because otherwise it would be easy to predict future OTPs by observing previous ones. Concrete OTP algorithms vary greatly in their details. Various approaches for the generation of OTPs are listed below:
- Based on time-synchronization between the authentication server and the client providing the password (OTPs are valid only for a short period of time)
- Using a mathematical algorithm to generate a new password based on the previous password (OTPs are effectively a chain and must be used in a predefined order).
- Using a mathematical algorithm where the new password is based on a challenge (e.g., a random number chosen by the authentication server or transaction details) and/or a counter.
There are also different ways to make the user aware of the next OTP to use. Some systems use special electronic security tokens that the user carries and that generate OTPs and show them using a small display. Other systems consist of software that runs on the user's mobile phone. Yet other systems generate OTPs on the server-side and send them to the user using an out-of-band channel such as SMS messaging. Finally, in some systems, OTPs are printed on paper that the user is required to carry.
Methods of generating the OTP
Time-synchronized
A time-synchronized OTP is usually related to a piece of hardware called a security token (e.g., each user is given a personal token that generates a one-time password). Inside the token is an accurate clock that has been synchronized with the clock on the proprietary authentication server. On these OTP systems, time is an important part of the password algorithm, since the generation of new passwords is based on the current time rather than, or in addition to, the previous password or a secret key. This token may be a proprietary device, or a mobile phone or similar mobile device which runs software that is proprietary, freeware, or open-source. An example of time-synchronized OTP standard is TOTP.
All of the methods of delivering the OTP below may use time-synchronization instead of algorithms.
Mathematical algorithms
Each new OTP may be created from the past OTPs used. An example of this type of algorithm, credited to Leslie Lamport, uses a one-way function (call it f). The one-time password system works by starting with an initial seed s, then generating passwords
- f(s), f(f(s)), f(f(f(s))), ...
as many times as necessary. Each password is then dispensed in reverse, with f(f(...f(s))...) first, to f(s). If an indefinite series of passwords is wanted, a new seed value can be chosen after the set for s is exhausted. The S/KEY one-time password system and its derivative OTP are based on Lamport's scheme.
An intruder who happens to see a one-time password may have access for one time period or login, but it becomes useless once that period expires. To get the next password in the series from the previous passwords, one needs to find a way of calculating the inverse function f−1. Since f was chosen to be one-way, this is extremely difficult to do. If f is a cryptographic hash function, which is generally the case, it is (so far as is known) a computationally infeasible task.
In some mathematical algorithm schemes, it is possible for the user to provide the server with a static key for use as an encryption key, by only sending a one-time password.[1]
The use of challenge-response one-time passwords requires a user to provide a response to a challenge. For example, this can be done by inputting the value that the token has generated into the token itself. To avoid duplicates, an additional counter is usually involved, so if one happens to get the same challenge twice, this still results in different one-time passwords. However, the computation does not usually[citation needed] involve the previous one-time password; that is, usually this or another algorithm is used, rather than using both algorithms.
The methods of delivering the OTP which are token-based may use either of these types of algorithm instead of time-synchronization.
Methods of delivering the OTP
Text messaging
A common technology used for the delivery of OTPs is text messaging. Because text messaging is a ubiquitous communication channel, being directly available in nearly all mobile handsets and, through text-to-speech conversion, to any mobile or landline telephone, text messaging has a great potential to reach all consumers with a low total cost to implement. However, the cost of text messaging for each OTP may not be acceptable to some users. OTP over text messaging may be encrypted using an A5/x standard, which several hacking groups report can be successfully decrypted within minutes or seconds,[2][3][4][5] or the OTP over SMS might not be encrypted by one's service-provider at all. In addition to threats from hackers, the mobile phone operator becomes part of the trust chain. In the case of roaming, more than a single mobile phone operator has to be trusted. Anyone using this information may mount a man-in-the-middle attack.
Recently Google has started offering OTP to mobile and landline phones for all Google accounts. The user can receive the OTP either as a text message or via an automated call using text-to-speech conversion. In case none of the user's registered phones is accessible, the user can even use one of a set of (up to 10) previously generated one-time backup codes as a secondary authorization factor in place of the dynamically generated OTP, after signing in with their account password.
Mobile phones
A mobile phone keeps costs low because a large customer-base already owns a mobile phone for purposes other than generating OTPs. The computing power and storage required for OTPs is usually insignificant compared to that which modern camera-phones and smartphones typically use. Mobile phones additionally support any number of tokens within one installation of the application, allowing a user the ability to authenticate to multiple resources from one device. This solution also provides model-specific applications to the user's mobile phone. However, a cellphone used as a token can be lost, damaged, or stolen.
Proprietary tokens
EMV is starting to use a challenge-response algorithm (called "Chip Authentication Program") for credit cards in Europe. On the other hand, in access control for computer networks, RSA Security's SecurID is one example of a time-synchronization type of token. Like all tokens, these may be lost, damaged, or stolen; additionally there is an inconvenience as batteries die, especially for tokens without a recharging facility or a non-replaceable battery. A variant of the proprietary token was proposed by RSA in 2006 and was described as "ubiquitous authentication",[6] in which RSA would partner with manufacturers to add physical SecurID chips to devices such as mobile phones.
Recently, it has become possible to take the electronic components associated with regular keyfob OTP tokens and embed them in a credit card form factor. However, the thinness of the cards, at 0.79mm to 0.84mm thick, prevents standard components or batteries from being used. Special polymer-based batteries must be used which have a much lower battery life than coin (button) cells. Semiconductor components must not only be very flat but must minimise power used in standby and when operating.
Yubico offers a small USB token with an embedded chip that creates a OTP when a key is pressed and simulates a keyboard to facilitate easily entering a long password.[7]
A new version of this technology has been developed that embeds a keypad into a payment card of standard size and thickness. The card has an embedded keypad, display, microprocessor and proximity chip.
Web-based methods
Authentication-as-a-service providers offer various web-based methods for delivering one-time passwords without the need for tokens. One such method relies on the user’s ability to recognize pre-chosen categories from a randomly-generated grid of pictures. When first registering on a website, the user chooses several secret categories of things; such as dogs, cars, boats and flowers. Each time the user logs into the website they are presented with a randomly-generated grid of pictures. Each picture in the grid has a randomly-generated alphanumeric character overlaid on it. The user looks for the pictures that fit their pre-chosen categories and enters the associated alphanumeric characters to form a one-time access code.[8][9] Other example of such system is Arrayshield IDAS where OTP can be generated by a combination of a pattern that user remembers (sequence of cells in an array) and a translucent ArrayCard (that has unique set of opaque and transparent cells with distinct numbers imprinted on opaque cells of each card)
Paper
In some countries online banking, the bank sends to the user a numbered list of OTPs that are printed on paper. For every online transaction, the user is required to enter a specific OTP from that list. In Germany and many other countries like Austria and Brazil,[10] those OTPs are typically called TANs (for 'transaction authentication numbers'). Some banks even dispatch such TANs to the user's mobile phone via SMS, in which case they are called mTANs (for 'mobile TANs').
Comparison of technologies
Comparison of OTP implementations
The cheapest OTP solutions are those that deliver OTPs on paper, and those that generate OTPs on an existing device, without the costs associated with (re-)issuing proprietary electronic security tokens and SMS messaging.
For systems that rely on electronic tokens, algorithm-based OTP generators must cope with the situation where a token drifts out-of-sync with its server if the system requires the OTP to be entered by a deadline. This leads to an additional development cost. Time-synchronized systems, on the other hand, avoid this at the expense of having to maintain a clock in the electronic tokens (and an offset value to account for clock drift). Whether or not OTPs are time-synchronized is basically irrelevant for the degree of vulnerability, but it avoids a need to re-enter passwords if the server is expecting the last or next code that the token should be having because the server and token have drifted out-of-sync.
Use of an existing mobile device avoids the need to obtain and carry an additional OTP generator. The battery may be recharged; as of 2011[update] most small card devices do not have rechargeable, or indeed replaceable, batteries. However, most proprietary tokens have tamper-proof features.
OTPs versus other methods of securing data
One-time passwords are vulnerable to social engineering attacks in which phishers steal OTPs by tricking customers into providing one or more OTPs that they used in the past. In late 2005 customers of a Swedish bank were tricked into giving up their one-time passwords.[11] In 2006 this type of attack was used on customers of a US bank.[12] Even time-synchronized OTPs are vulnerable to phishing, by two methods: The password may be used as quickly by the attacker as the legitimate user, if the attacker can get the OTP in plaintext quickly enough. The other type of attack—which may be defeated by OTP systems implementing the hash chain as discussed above—is for the phisher to use the information gained (past OTP codes which are no longer valid) by this social-engineering method to predict what OTP codes will be used in the future. For example, an OTP password-generator that is pseudo-random rather than truly random might or might not be able to be compromised, because pseudo-random numbers are often predictable once one has the past OTP codes. An OTP system can only use truly random OTPs if the OTP is generated by the authenticator and transmitted (presumably out-of-band) to the user; otherwise, the OTP must be independently generated by each party, necessitating a repeatable, and therefore merely pseudo-random, algorithm.
Although OTPs are in some ways more secure than a static memorized password, users of OTP systems are still vulnerable to man-in-the-middle attacks. OTPs should therefore not be disclosed to any third parties, and using an OTP as one layer in layered security is safer than using OTP alone; one way to implement layered security is to use an OTP in combination with a password that is memorized by the user (and never transmitted to the user, like OTPs often are). An advantage to using layered security is that a single sign-on combined with one master password or password manager becomes safer than using only 1 layer of security during the sign-on, and thus the inconvenience of password fatigue is avoided if one usually has long sessions with many passwords that would need to be entered mid-session (to open different documents, websites, and applications); however, the disadvantage of using many forms of security all at once during a single sign-on is that one has the inconvenience of more security precautions during every login—even if one is logging in only for a brief usage of the computer to access information or an application that doesn't require as much security as some other top-secret items that computer is used for. See also Related technologies, below.
Related technologies
More often than not, one-time passwords are an embodiment of two-factor authentication (T-FA). T-FA is a form of layered security where it is unlikely that both layers would be disabled by someone using only one type of attack. Some single sign-on solutions make use of one-time passwords. One-time password technology is often used with a security token.
Standardization
Many OTP technologies are patented. This makes standardization in this area more difficult, as each company tries to push its own technology. Standards do, however, exist – for example, RFC 1760 (S/KEY), RFC 2289 (OTP), RFC 4226 (HOTP) and RFC 6238 (TOTP).
See also
- Google Authenticator
- Initiative For Open Authentication (OATH)
- KYPS (OTP system based on One-time pads)
- One-time pad (OTP)
- OTPW
- S/KEY
- Security token
- Two-factor authentication
References
 |
- ^ EOTP - Static Key Transfer
- ^ Barkan, Elad (2003). "Instant Ciphertext-Only Cryptanalysis of GSM Encrypted Communication" (PDF). Cryptome 2003: 600–16.
{{cite journal}}: Unknown parameter|coauthors=ignored (|author=suggested) (help) - ^ Barkan, Elad. "Instant Ciphertext-Only Cryptanalysis of GSM Encrypted Communication by Barkan and Biham of Technion (Full Version)" (PDF).
{{cite web}}: Unknown parameter|coauthors=ignored (|author=suggested) (help) - ^ Gueneysu, Tim (2008). "Cryptanalysis with COPACOBANA" (PDF). Transactions on Computers Nov. 2008: 1498–1513.
{{cite journal}}: Text "Volume 57" ignored (help) - ^ Nohl, Karsten (2009-12-27). GSM: SRSLY?. 26th Chaos Communication Congress (26C3):. Retrieved 2009-12-30.
{{cite conference}}: Unknown parameter|coauthors=ignored (|author=suggested) (help)CS1 maint: extra punctuation (link) - ^ http://www.encyclopedia.com/doc/1G1-142107014.html
- ^ "Yubico AB". Bloomberg Businessweek. Retrieved July 13, 2011.
- ^ Ericka Chickowski (2010-11-03). "Images Could Change the Authentication Picture". Dark Reading.
- ^ "Confident Technologies Delivers Image-Based, Multifactor Authentication to Strengthen Passwords on Public-Facing Websites". 2010-10-28.
- ^ http://portal.brb.com.br/para-voce/conta-corrente-e-servicos/beneficios-e-facilidades/brb-banknet
- ^ The Register article
- ^ Washington Post Security Blog