Caster
A caster (or castor) is an undriven, single, double, or compound wheel that is designed to be mounted to the bottom of a larger object (the "vehicle") so as to enable that object to be easily moved. They are available in various sizes, and are commonly made of rubber, plastic, nylon, aluminum, or stainless steel.
Casters are found in numerous applications, including shopping carts, office chairs, and material handling equipment. High capacity, heavy duty casters are used in many industrial applications, such as platform trucks, carts, assemblies, and tow lines in plants. Generally, casters operate well on smooth and flat surfaces.
Types
Casters may be fixed to roll along a straight line path, or mounted on a pivot such that the wheel will automatically align itself to the direction of travel.
Rigid casters
A basic, rigid caster consists of a wheel mounted to a stationary fork. The orientation of the fork, which is fixed relative to the vehicle, is determined when the caster is mounted to the vehicle. An example of this is the wheels found at the rear of a shopping cart in North America. Rigid casters tend to restrict vehicle motion so that the vehicle travels along a straight line.
Swivel casters
Like the simpler rigid caster, a swivel caster incorporates a wheel mounted to a fork, but an additional swivel joint above the fork allows the fork to freely rotate about 360°, thus enabling the wheel to roll in any direction. This makes it possible to easily move the vehicle in any direction without changing its orientation. Swivel casters are sometimes attached to handles so that an operator can manually set their orientation. The swivel caster was invented in 1920 by Seibert Chesnutt, US Patent 1341630.
Additionally, a swivel caster typically must include a small amount of offset distance between the center axis of the vertical shaft and the center axis of the caster wheel. When the caster is moved and the wheel is not facing the correct direction, the offset will cause the wheel assembly to rotate around the axis of the vertical shaft to follow behind the direction of movement. If there is no offset, the wheel will not rotate if not facing the correct direction, either preventing motion or dragging across the ground.
When in motion along a straight line, a swivel caster will tend to automatically align to, and rotate parallel to the direction of travel. This can be seen on a shopping cart when the front casters align parallel to the rear casters when traveling down an aisle. A consequence of this is that the vehicle naturally tends to travel in a straight direction. Precise steering is not required because the casters tend to maintain straight motion. This is also true during vehicle turns. The caster rotates perpendicular to the turning radius and provides a smooth turn. This can be seen on a shopping cart as the front wheels rotate at different velocities, with different turning radius depending on how tight a turn is made.
The angle of, and distance between the wheel axles and swivel joint can be adjusted for different types of caster performance.[1]
Industrial Casters
An Industrial caster can have both the swivel or rigid caster designs; however, industrial casters are typically bolted to their application with a top plate, usually consisting of 4 bolt holes for the strongest connection between the flat top plate and the bottom of the mechanism. These heavy duty casters can hold any range of weight from one thousand pounds to more than thirty thousand pounds (1,000-30,000+lbs.). Some applications requiring industrial casters include; dolly carts, assembly turntables, heavy duty storage racks, holding bins, tow lines, maintenance equipment, and a number of other industries that have material handling mechanisms.
In early caster manufacturing, the metal rig portion was stamped in three separate parts, each needing to be welded to the top plate. Revolutionized improvements to the manufacturing of industrial casters has led to the laser cutting of the entire metal rig design in a single blank, then using a press brake to shape the legs to the desired ninety degree angle. This process makes industrial casters far stronger than traditional wheel and axle designs.
When interested about the performance level of industrial casters, various factors and options, in according with the applications environment, can make the performance of the casters better. Heavier weight loads require more distribution of weight across the surface a wheel, so larger diameters and width will increase capacity limits. Considering the floor condition, cast iron and high profile polyurethane will be the hardest surface wheel for dangerous or dirty applications. Debris on the ground with be tracked by casters and is something else to think about when selecting the best wheel for a caster application. The importance of options for industrial casters is to get maximum performance and productivity, and this is done by understanding the exact environment the caster will be used in.[2] When needing to purchase heavy duty casters, talking to caster manufacturing experts and explaining your situation is advised.
Braking and locking casters
Common inexpensive casters may include a brake feature, which prevents the wheel from turning. This is commonly achieved using a lever that presses a brake cam against the wheel. However a swivel caster is still able to move around slightly, in a small circle rotating around offset distance between the vertical shaft and the center of the locked wheel.
A more complex type of swivel caster, sometimes called a total lock caster, has an additional rotational lock on the vertical shaft so that neither the shaft can rotate or the wheel can turn, providing very rigid support. It is possible to use these two locks together or separately. If the vertical shaft is locked but the wheel can still turn, the caster becomes a directional caster, but one which may be locked to roll in one direction along any horizontal axis.
In some cases it is useful to be able to brake or lock all casters at the same time, without having to walk around to individually engage a mechanism on each one. This is accomplished using a central lock mechanism, which is engaged by a rigid ring encircling each swivel caster, slightly above the wheel, that lowers and presses down on the wheel, preventing both wheel and swivel rotation. An alternate method is the central lock caster, which has a rotating cam in the center of each vertical caster shaft, leading down to a braking mechanism in the bottom of each caster.
Caster flutter
One major disadvantage of casters is flutter. A common example of caster flutter is on a supermarket shopping cart, when one caster rapidly swings side-to-side. This oscillation, which is also known as shimmy, occurs naturally at certain speeds, and is similar to speed wobble that occurs in other wheeled vehicles. The speed at which caster flutter occurs is based on the weight borne by the caster and the distance between the wheel axle and steering axis. This distance is known as trailing distance, and increasing this distance can eliminate flutter at moderate speeds. Generally, flutter occurs at high speeds.
What makes flutter dangerous is that it can cause a vehicle to suddenly move in an unwanted direction. Flutter occurs when the caster is not in full contact with the ground and therefore its orientation is uncontrollable. As the caster regains full contact with the ground, it can be in any orientation. This can cause the vehicle to suddenly move in the direction that the caster is pointed. At slower speeds, the caster’s ability to swivel can correct the direction and can continue travel in the desired direction. But at high speeds this can be dangerous as the wheel may not be able to swivel quickly enough and the vehicle may lurch in any direction.
Electric and racing wheelchair designers are very concerned with flutter because the chair must be safe for riders. Increasing trailing distance can increase stability at higher speeds for wheelchair racing, but may create flutter at lower speeds for everyday use. Unfortunately, the more trail the caster has, the more space the caster requires to swivel. Therefore, in order to accommodate this extra swivel space, lengthening of frame or extending the footrests may be required. This tends to make the chair more cumbersome.
Caster flutter can be controlled by adding dampers or increasing the friction of the swivel joints.[3] This can be accomplished by adding washers to the swivel joint. The friction increases as the weight on the front of the chair increases. Anytime the caster begins to flutter, it slows the chair and shifts weight to the front wheels. There are several online anti-flutter kits for retrofitting wheelchair casters in this manner. Other methods of reducing caster flutter include increasing swivel lead, using heavier grease, reducing the mass of the wheel, or increasing friction with the ground by changing materials.[4]
Ergonomic Designs
Ergonomic casters are scientifically designed to better fit the worker with their environment and task at hand. Long-term repetitive use with force resisting casters can cause strain injuries from push/pull motions with loads that are currently requiring more force than needed. Improper casters can also have too much pressure on the wheels which will take away from productivity and life of the casters.
All aspects of the complete caster play a role in how effective the caster can be. The wheel hardness, tire shape, the swivel offset and the diameter of the wheel, will all affect the ease of motion at start. Harder wheels will make the caster easier to roll by reducing the force required to begin motion. A flat tire has more surface area touching the floor so this style will take more force, opposed to a balloon tread shape tire. Turing is affected by the swivel offset and wheel diameter can impact rolling resistant.[5]
Outside of the tradition caster design, additional caster options, such as toe guards, track wipers, reinforced legs, steering tubes, swivel locks and brakes have all been created to prevent injuries in the workplace.
Wheel diameter, wheel width, and tandem wheels
The outer diameter of a caster wheel affects how easy it is for the caster to be able to move across rough or irregular surfaces. Large diameter caster wheels are able to bridge wide gaps where a small caster would fall inside and get stuck, such as the gap in the floor between an elevator door and the elevator car.
However, the larger diameter a caster wheel, the higher or wider the caster support arm must be. Either the base of a low-hanging object must be lifted higher above the wheels, or the casters must hang out to the sides straddling the low-hanging supported object. Large diameter swivel casters also typically need much more room to rotate the vertical shaft than a small caster.
Load capacity may be increased by using wider wheels with more ground contact area. However, when rotating a wide swivel caster in-place, the center part of the wheel-to-ground contact patch rotates slower than the regions further out to the sides. This difference in rotation speed across the base of the wheel contact patch causes wide wheels to resist rotation around the swivel, and this resistance increases as weight loading increases.
An alternate way to increase load capacity while limiting swivel-rotation resistance is to use multiple narrow wheels in tandem on the same wheel axis. Each wheel has a comparatively narrower ground contact patch than a single wide wheel, so there is less resistance to turning in place on the swivel.
Other related wheels
There are four main classifications of wheels:
- A standard wheel has a center rotating hub (or bearing) and a compliant material on its outer side.
- A caster is a wheel mounted to a fork, with an optional, additional offset steering joint.
- An omni-directional wheel (Mecanum wheel, Omni wheel, or Swedish wheel) is made of a large central hub with many additional smaller wheels mounted along the perimeter such that their axes are perpendicular to the central wheel. The central wheel can rotate around its axis like traditional wheels, but the smaller wheels can also enable movement perpendicular to the central axis.
- A spherical wheel is omni-directional and is generally a spherical ball mounted inside a restraining fixture. An example is a ball transfer unit.
See also
References
- ^ Siegwart, R. and Nournakhsh, I. "Introduction to Autonomous Mobile Robots", MIT Press, Cambridge, MA , 2004. 321 p. ISBN 0-262-19502-X
- ^ Tips for Selecting Heavy Duty Industrial Casters and Wheels Caster Concepts' Solutions
- ^ 12 Making the Front Wheels, Center for International Rehabilitation Chapter
- ^ Causes and Corrections of Caster Flutter Caster Concepts' Solutions
- ^ Focus on Ergonomic Design Improvements Caster Concepts' Solutions