Jump to content

Jury stability criterion

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Skoocda (talk | contribs) at 18:16, 19 April 2016 (Reversed order of coefficients in table to be consistent with the formula, verified by Digital Control Engineering - Analysis and Design, 2nd Edition and Digital Control of Dynamic Systems, 3rd Edition). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Method

If the characteristic polynomial of the system is given by

then the table is constructed as follows:

row z0 z1 z2 z.... zn-1 zn
1 a0 a1 a2 ... an-1 an
2 an an-1 an-2 ... a1 a0
3 b0 b1 ... bn-2 bn-1
4 bn-1 bn-2 ... b1 b0
5 c0 c1 ... cn-2
6 cn-2 cn-3 ... c0
... ... ... ... ... ... ...
2n-5 p3 p2 p1 p0
2n-4 p0 p1 p2 p3
2n-3 q2 q1 q0

That is, the first row is constructed of the polynomial coefficients in order, and the second row is the first row in reverse order and conjugated.

The third row of the table is calculated by subtracting times the second row from the first row, and the fourth row is the third row with the first n elements reversed (as the final element is zero).

The expansion of the table is continued in this manner until a row containing only one non zero element is reached.

Note the is for the 1st two rows. Then for 3rd and 4th row the coefficient changes (i.e. ) . This can be viewed as the new polynomial which has one less degree and then continuing.