Jump to content

Seafloor mapping

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by CS104G27 (talk | contribs) at 19:59, 20 November 2016. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Through history mankind has been constantly trying to overcome one of the biggest challenges ever faced: to explore our world. Exploration is in our nature, and it has been one of mankind's top priorities since the stone-age. Although we have changed our method of mapping our world from just pen and paper, to photographs and so on, we are constantly improving and finding more efficient ways to accomplish this task. Although even after all these improvements there is still a huge portion of our world that is undiscovered, the sea. This article was created to document some of the history behind the mapping of the sea floor and the more modern approaches to documenting the seabed.

History of seafloor mapping

At the beginning of the twentieth century mapping the seafloor was a very difficult task. The mapping of the sea floor started by using sound waves which were contoured into isobaths and early bathymetric charts of shelf topography provided the first insight into seafloor morphology. Due to horizontal positional accuracy and imprecise depth lead to mapping mistakes. It wasn't until the mid-twenties though, that the first achievements in visualizing the sea and ocean floors was made, when Marie Tharp, working alongside with Dr. Bruce Charles Heezen created the first three-dimensional physiographic map of the world's ocean basins in 1997.

Marie's discovery was made at the perfect time. It was one of many discoveries that took place alongside with the invention of the computer. Computers with their ability to compute large quantities of data have made research conduction much easier. Researching the world oceans is no exception.

There has been a bloom in the underwater environmental exploration, because rather than just creating a map, scientists are trying to visualize the entire crust below in the maximum possible detail. This is where computers are put into good use. With their help researchers have managed to store and compute a large quantity of data enabling them to create the first digital map of the world ocean bed in 1970.The constantly developing technology allows computing to take place in the special equipment required for the so-called "high-resolution orthoimagery" which means that people no longer use sound frequencies to conduct marine exploration.

This method was later upgraded to Airborne Laser Bathymetry (ALB). In other words, this method just improves accuracy in the previous one. Another addition to this way of research is that images are not only of higher quality but have colour as well. The improvements of the research methods and the large amount of data received, stored and computed all lead to the creation of one of the first colour images of the underwater environment created on a computer.[1]

Satellite imagery

Introduction

Another form of mapping the seafloor is through the utilisation of satellites. The satellites are equipped with hyper-spectral and multi-spectral sensors which are used to provide constant streams of images of coastal areas providing a more feasible method of visualising the bottom of the seabed. [2]

Hyper-Spectral Sensors and The Seafloor

The data-sets produced by Hyper-Spectral (HS) Sensors tend to range between 100-200 spectral bands of approximately 5 - 10nm bandwidths. Hyper-Spectral Sensing, or imaging spectroscopy, is a combination of continuous remote imaging and spectroscopy producing a single set of data.[2] Two examples of this kind of sensing are AVIRIS (Airborne visible/infrared imaging spectrometer) and HYPERION. More information on Hyper-Spectral Imaging can be found here (Hyperspectral imaging).

The application of HS sensors in regards to the imaging of the seafloor is the detection and monitoring of chlorophyll, phytoplankton, salinity, water quality, dissolved organic materials, and suspended sediments. However this does not provide a great visual interpretation of coastal environments.[2]

Multi-Spectral Sensors and The Seafloor

The other method of satellite imaging, Multi-Spectral (MS) imaging tends to devide the EM Spectrum into a small number of bands, unlike it's partner Hyper-Spectral Sensors which can capture a much larger number of spectral bands. More information on Multi-Spectral Sensing can be found here (Multispectral image).

MS sensing is used more in the mapping of the seabed due to its fewer spectral bands with relatively larger bandwidths. The larger bandwidths allow for a larger spectral coverage, which is crucial in the visual detection of of marine features and general spectral resolution of the images acquired. [2]

Airborne laser bathymetry

Introduction

High-density airborne laser bathymetry (ALB) is a modern, highly technical, approach to the mapping the seafloor. First developed in the 1960s and 1970s, ALB is a "light detection and ranging (LiDAR) technique that uses visible, ultraviolet, and near infrared light to optically remote sense a contour target through both an active and passive system." What this means is that airborne laser bathymetry uses light outwith the visible spectrum to detect the curves in underwater landscape. [2]

Execution

ALB generally operates in the form of a pulse of non-visible light being emitted from a low-flying aircraft and a receiver recording two reflections from the water. The first of which originates from from the surface of the water, and the second from the seabed. This method has been used in a number of studies to map segments of the seafloor of various coastal areas, (e.g. Brock & Purkis (2009) The emerging role of Lidar remote sensing in coastal research and resource management. In: Brock J, Purkis S (eds) Coastal applications of airborne lidar. J Coastal Res, Special Issue No. 53: Page(s) 1–5, Bukata et al. (1995) Optical properties and remote sensing of inland and coastal waters. CRC Press, Boca Raton, page(s) 365 and Deronde et al. (2008) Monitoring of the sediment dynamics along a sandy shoreline by means of airborne hyper-spectral remote sensing and LIDAR: a case study in Belgium. Earth Surf Process 33: Page(s) 280–294)[2]

Examples of Commercial LIDAR Bathymetry Systems

There a various LIDAR Bathymetry Systems that are commercially accessible. Two of these systems are Scanning Hydrographic Operational Airborne Lidar Survey (SHOALS) and the Laser Airborne Depth Sounder (LADS). SHOALS was first developed to help the United States Army Corps of Engineers (USACE) in bathymetric surveying by a company called Optech in the 90s. SHOALS is done through the transmission of a laser, of wavelength between 530 and 532 nm, from a height of approximately 200m at speed of 60 m/s on average. [3]

References

  • Charles W. Finkl 1941. Seafloor Mapping Along Continental Shelves: Research and Techniques for Visualizing Benthic Environments. Internet resource edition. Volume 13. Page(s) 3 - 53
  • Charles W. Finkl 1941. Seafloor Mapping Along Continental Shelves: Research and Techniques for Visualizing Benthic Environments. Internet resource edition. Volume 13. Page(s) 31 - 35
  • Charles W. Finkl 1941. Seafloor Mapping Along Continental Shelves: Research and Techniques for Visualizing Benthic Environments. Internet resource edition. Volume 13. Page(s) 23
Retrieved from "https://en.wikipedia.org/w/index.php?title=Seafloor_mapping&oldid=750604280"