Jump to content

Vehicle-specific power

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 64.132.59.226 (talk) at 12:42, 14 May 2018 (Formulae: Using italics for lower case variable names). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The concept of vehicle-specific power (VSP) is a formalism used in the evaluation of vehicle emissions. The idea was first developed by J. L. Jiménez (Jiménez 1998) at the Massachusetts Institute of Technology.[1][2] Informally, it is the sum of the loads resulting from aerodynamic drag, acceleration, rolling resistance, and hill climbing, all divided by the mass of the vehicle.[1] Conventionally, it is reported in kilowatts per tonne,[1] the instantaneous power demand of the vehicle divided by its mass.[2] VSP, combined with dynamometer and remote-sensing measurements, can be used to determine vehicle emissions.[2]

The United States Environmental Protection Agency held a "modelling shootout" in 2001, to help with the development of its (then) new MOVES (motor vehicle emissions simulator) vehicle emissions model. Two of the four modelling metholodogies in the shootout, one from North Carolina State University (Frey 2002) and one internal to the EPA, used vehicle-specific power metrics.[3][4] MOVES was eventually implemented using vehicle-specific power as its primary metric.[4] (See Koupal et al. 2002, § 7.1.3.1 for the EPA MOVES draft VSP specification.)

Formulae

VSP can be represented by several mathematical formulae. Haibo Zhai of North Carolina State University provides the following formula:

VSP = v × (a + g × sin φ + ψ) + ζ × v3[5]

where:

v
vehicle speed (in metres per second)
a
vehicle acceleration (in metres per second per second)
g
acceleration due to gravity (gee, in metres per second per second)
ϕ
road grade
ψ
rolling resistance coefficient (metres per second per second)
ζ
drag coeficient (reciprocal metres)

Jiménez' own formula is:

(Jiménez et al. 1999)

References

Cross-reference

  1. ^ a b c NAP2001, p. 108.
  2. ^ a b c NAP2000, p. 184.
  3. ^ Barth, Younglove & Scora 2005, p. 10.
  4. ^ a b Huai et al. 2005, p. 9595.
  5. ^ Zhai 2007, p. 56–57.

Sources used

  • National Research Council Committee to Review EPA's Mobile Source Emissions Factor (Mobile) Model (2000). Modeling mobile-source emissions. Compass series. National Academies Press. ISBN 978-0-309-07088-1.
  • National Research Council Committee on Vehicle Emission Inspection and Maintenance Programs (1 November 2001). Evaluating vehicle emissions inspection and maintenance programs. National Academies Press. ISBN 978-0-309-07446-9.
  • Barth, Matthew; Younglove, Theodore; Scora, George (2005). "Development of a Heavy-Duty Diesel Modal Emissions and Fuel Consumption Model". California Partners for Advanced Transit and Highways (PATH). {{cite journal}}: Invalid |ref=harv (help)
  • Huai, Tao; Durbin, Thomas D.; Younglove, Ted; Scora, George; Barth, Matthew; Norbeck, Joseph M. (2005). "Vehicle Specific Power Approach to Estimating On-Road NH3 Emissions from Light-Duty Vehicles" (PDF). Environmental Science and Technology. 39: 9595–9600. Bibcode:2005EnST...39.9595H. doi:10.1021/es050120c. {{cite journal}}: Invalid |ref=harv (help)
  • Zhai, Haibo (2007). Regional on-road mobile source emissions characterization for conventional and alternative vehicle technologies. ProQuest. ISBN 978-0-549-54985-7. {{cite book}}: Invalid |ref=harv (help)

Further reading