Jump to content

Search results

Showing results for shear pin. No results found for shearpin.
View (previous 20 | ) (20 | 50 | 100 | 250 | 500)
  • Thumbnail for Shear pin
    A shear pin is a mechanical detail designed to allow a specific outcome to occur once a predetermined force is applied. It can either function as a safeguard...
    6 KB (889 words) - 00:16, 22 November 2023
  • Thumbnail for Torque limiter
    a friction plate slip-clutch), or uncouple the load entirely (as in a shear pin). The action of a torque limiter is especially useful to limit any damage...
    5 KB (690 words) - 00:20, 22 November 2023
  • Thumbnail for Split pin
    Split pins are typically made of soft metal, making them easy to install and remove, but also making it inadvisable to use them to resist strong shear forces...
    7 KB (517 words) - 18:01, 21 September 2024
  • Thumbnail for Pin tumbler lock
    exactly at the shear point. This allows the plug to rotate, thus opening the lock. When the key is not in the lock, the pins straddle the shear point, preventing...
    17 KB (2,070 words) - 18:45, 3 November 2024
  • tools to shear sheet metal Board shear, in bookbinding, a tool to cut board or paper Shear pin, in machinery, such as a plough, designed to shear (break)...
    3 KB (409 words) - 03:37, 6 June 2023
  • Thumbnail for Pushback (aviation)
    pulled. The towbar has a shear pin which prevents the aircraft from being mishandled by the tug; when overstressed the shear pin will snap, disconnecting...
    15 KB (1,846 words) - 22:58, 4 October 2023
  • Thumbnail for Siemens S200
    two-car train of LRV4 cars was found with a faulty shear pin in its couplers. The S200's coupler shear pins allow the couplers to retract inwards in a collision...
    29 KB (2,764 words) - 13:32, 23 September 2024
  • Thumbnail for Minimum metal mine
    easily be made from other materials, such as the spring, striker tip, and shear pin. Minimum metal mines are extremely difficult to detect using conventional...
    7 KB (756 words) - 21:46, 20 August 2024
  • striker pin restrained by a shear pin. Sufficient pressure on the pressure plate presses the plate down on the head of the fuze, breaking the shear wire...
    2 KB (209 words) - 00:01, 20 July 2023
  • Thumbnail for Bolted joint
    Bolted joint (redirect from Shear joint)
    the shear stress limit. Bolted joints may be used intentionally as sacrificial parts, which are intended to fail before other parts, as in a shear pin. Locking...
    33 KB (4,515 words) - 04:05, 28 September 2024
  • Thumbnail for Propeller
    a narrow shear pin through the drive shaft and propeller hub transmits the power of the engine at normal loads. The pin is designed to shear when the...
    42 KB (5,340 words) - 01:09, 8 September 2024
  • running prong is connected to the top of the internal seal prong with a shear pin, and the running tool is attached to the lock in the normal manner. After...
    3 KB (513 words) - 15:20, 29 March 2022
  • two propellant bags. A rod attached the 2.7kg round to the plate with a shear pin. On firing, the initial pressure (which had to be quite high in order...
    13 KB (1,881 words) - 04:53, 24 October 2024
  • Thumbnail for Master keying
    in the set of locks. For example, master keyed pin tumbler locks often have two shear points at each pin position, one for the change key and one for the...
    4 KB (509 words) - 00:03, 6 January 2024
  • Thumbnail for Conveyor chain
    double pitch and shear pin varieties. Double pitch sprockets wear evenly and offer a longer service life than standard sprockets. Shear pin sprockets break...
    4 KB (582 words) - 23:03, 6 November 2022
  • shear small brass or steel pins that are put in place to function certain down-hole tools at a certain moment. The operator can use the jars to shear...
    22 KB (3,682 words) - 21:35, 21 May 2024
  • Thumbnail for M1 mine
    pressure on the spider presses down on the head of the fuze, breaks a shear pin, and inverts a belleville spring, flipping the striker downwards into...
    2 KB (211 words) - 05:23, 30 September 2023
  • Thumbnail for Circular saw
    determines which hand the saw is. Saws of this size typically have a shear pin hole, off axis, that breaks if the saw is overloaded and allows the saw...
    17 KB (2,208 words) - 19:21, 30 August 2024
  • Thumbnail for Tellermine 35
    edge deforms the pressure plate compressing a spring, and breaking a shear pin which holds back the spring-loaded striker. Once the striker is released...
    3 KB (246 words) - 08:35, 17 February 2022
  • Thumbnail for Gudgeon pin
    In internal combustion engines, the gudgeon pin (English, wrist pin or piston pin US English) connects the piston to the connecting rod, and provides...
    6 KB (742 words) - 05:19, 28 July 2024
View (previous 20 | ) (20 | 50 | 100 | 250 | 500)