Jump to content

Limits and fits

Edit links
From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by Citation bot (talk | contribs) at 05:01, 19 November 2021 (Add: title. Changed bare reference to CS1/2. | Use this bot. Report bugs. | Suggested by BrownHairedGirl | Linked from User:BrownHairedGirl/Articles_with_bare_links | #UCB_webform_linked 385/2184). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)

In mechanical engineering, limits and fits are a set of rules regarding the dimensions and tolerances of mating machined parts if they are to achieve the desired ease of assembly, and security after assembly - sliding fit, interference fit, rotating fit, non-sliding fit, loose fit, etc.

Tolerances are typically specified in thousandths of an inch or hundredths of a millimetre.[1]

See also

[edit]

References

[edit]
  1. ^ "ISO System of Limits and Fits (Tolerances)".
[edit]


Stub icon

This engineering-related article is a stub. You can help Wikipedia by expanding it.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Limits_and_fits&oldid=1056009708"