Jump to content

State Highway 60 (New Zealand)

Edit links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Paora (talk | contribs) at 23:55, 1 April 2022 (macrons). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

State Highway 60 shield}}
State Highway 60
Route information
Maintained by NZ Transport Agency
Length116 km (72 mi)
Major junctions
South end SH 6 (Gladstone Road/Main Road Hope) at Richmond
North endCollingwood
Location
CountryNew Zealand
Primary
destinations		Motueka, Riwaka, Tākaka
Highway system
← SH 59→ SH 61

State Highway 60 is a state highway servicing the far northwest of the South Island of New Zealand. Running between the settlements of Richmond (south of Nelson) and Collingwood, it is 116 kilometres (72 mi) long and lies entirely within the Tasman District. It is the northernmost highway in the South Island and is a popular tourist route, servicing Motueka, Abel Tasman National Park, Golden Bay, and Farewell Spit.

Route

The highway starts at Richmond at a roundabout junction with SH 6 and proceeds in the northwesterly direction across the Waimea Plains. Near Māpua, the road deviates onto the Ruby Bay bypass (Mamaku Drive) and emerges on the shores of the Moutere Inlet adjacent to Tasman Village. The highway then passes along the edge of Motueka Estuary and through the major town of Motueka. Just past Riwaka, the road to Kaiteriteri and Abel Tasman National Park branches off to the right while SH 60 branches to the left. The highway then rises towards Tākaka Hill (elevation 791 metres above sea level) and the notorious Eureka Bend.[1] The highway then descends into the Tākaka Valley and passes through the town of Tākaka. The highway then hugs the coastline of Golden Bay before terminating just outside the township of Collingwood.[2]

History

At first there was no road connecting the coastal areas about Bronte, Māpua and Tasman. Early settlers had roads from landing sites on Waimea Inlet and along ridges, and they avoided crossing the peripheral swampy valleys. When the Coastal Highway was constructed it was gravel and the Inland (Moutere) Highway was the main highway. At some point in about the 1970s, the coastal route became the main route.[citation needed]

In 2003, the terminus at Collingwood was curtailed 1.1 km to the intersection of Collingwoood-Bainham Main Road.[3]

Until 2010, before the construction of the Ruby Bay bypass, SH 60 followed the coastline around Māpua.[4][5][6]

  • SH 60 as Commercial Street passing through Tākaka
    SH 60 as Commercial Street passing through Tākaka
  • Aerial view of SH 60 passing through the southern section of Motueka
    Aerial view of SH 60 passing through the southern section of Motueka

See also

References

Wikimedia Commons has media related to State Highway 60 (New Zealand).
  1. ^ "Eureka Bend to be fixed". Nelson Mail. 17 January 2009. Retrieved 13 May 2016.
  2. ^ State Highway 60 on Google Maps
  3. ^ "Revoking Sections of State Highway and Declaring New Sections of State Highway". NZ Gazette. 11 December 2003. Retrieved 12 February 2018.
  4. ^ "Old meets new as bypass opens". Nelson Mail. 23 October 2010.
  5. ^ "Ruby Bay Bypass Road Name Changes". Tasman District Council. Retrieved 12 May 2016.
  6. ^ "Declaring a Section of State Highway-State Highway 60, Coastal Highway, Tasman District". NZ Gazette. 22 September 2011. Retrieved 5 July 2016.
Retrieved from "https://en.wikipedia.org/w/index.php?title=State_Highway_60_(New_Zealand)&oldid=1080557687"