Jump to content

Atmospheric icing

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 68.146.223.72 (talk) at 12:37, 8 September 2022 (Fixed small grammatical error). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The effect of atmospheric icing on a tree in the Black Forest of Germany.

Atmospheric icing occurs in the atmosphere when water droplets suspended in air freeze on objects they come in contact with. It is not the same as freezing rain, which is caused directly by precipitation. Icing conditions can be particularly dangerous to aircraft, as the built-up ice changes the aerodynamics of the flight surfaces and airframe, which can increase the risk of a stall and potentially accidents. For this reason, on-board ice protection systems have been developed on aircraft intended to fly through these conditions.

Water does not always freeze at 0 °C (32 °F). Water that persists in liquid state below this temperature is said to be supercooled, and supercooled water droplets cause icing on aircraft. Below −20 °C (−4 °F), icing is rare because clouds at these temperatures usually consist of ice particles rather than supercooled water droplets. Below −48 °C (−54 °F), supercooled water always freezes; therefore, icing is impossible.[1]

Icing also occurs on towers, wind turbines, boats, oil rigs, trees and other objects exposed to sub-freezing temperatures and water droplets. Unmanned aircraft are particularly sensitive to icing.[2] In cold climates on land, atmospheric icing can be common in winter as elevated terrain interacts with cold clouds as these can freeze en masses on mountain slopes.[3] Ice loads are a major cause of catastrophic failures of overhead electric power lines when icing accumulates and breaks them from shear weight. Their estimation is, therefore, crucial in the structural design of power line systems to withstand ice loads[4] and can be done by numerical icing models and examples that include meteorological data.[5]

See also

References

  1. ^ Moore, Emily; Valeria Molinero (24 November 2011). "structural transformation in supercooled water controls the crystallization rate of ice". Nature. 479 (7374): 506–508. arXiv:1107.1622. Bibcode:2011Natur.479..506M. doi:10.1038/nature10586. PMID 22113691. S2CID 1784703.
  2. ^ Hann, Richard; Johansen, Tor (2020). "Unsettled Topics in Unmanned Aerial Vehicle Icing (EPR2020008 Research Report) - SAE Mobilus". saemobilus.sae.org. doi:10.4271/epr2020008. S2CID 226200723. Retrieved 2021-02-14.
  3. ^ Yang, Jing; Jones, Kathleen F.; Yu, Wei; Morris, Robert (2012-09-08). "Simulation of in-cloud icing events on Mount Washington with the GEM-LAM". Journal of Geophysical Research: Atmospheres. 117 (D17): n/a. Bibcode:2012JGRD..11717204Y. doi:10.1029/2012jd017520. ISSN 0148-0227.
  4. ^ Farzaneh, M. (2008) Atmospheric Icing of Power Networks. Springer Science & Business Media, 2008, 381 p. ISBN 978-1-4020-8530-7
  5. ^ Makkonen, L. (2000) Models for the growth of rime, glaze, icicles and wet snow deposits on structures. Philosophical Transactions of the Royal Society of London A, 358 (1776): 2913-2939.
Sources