Jump to content

Spark plasma sintering

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Citation bot (talk | contribs) at 11:25, 3 January 2023 (Add: s2cid, authors 1-1. Removed parameters. Some additions/deletions were parameter name changes. | Use this bot. Report bugs. | Suggested by SemperIocundus | #UCB_webform 513/2500). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Spark plasma sintering (SPS),[1] also known as field assisted sintering technique (FAST)[2] or pulsed electric current sintering (PECS), or plasma pressure compaction (P2C)[3] is a sintering technique.

The main characteristic of SPS is that the pulsed or unpulsed DC or AC current directly passes through the graphite die, as well as the powder compact, in case of conductive samples. Joule heating has been found to play a dominant role in the densification of powder compacts, which results in achieving near theoretical density at lower sintering temperature compared to conventional sintering techniques.[4] The heat generation is internal, in contrast to the conventional hot pressing, where the heat is provided by external heating elements. This facilitates a very high heating or cooling rate (up to 1000 K/min), hence the sintering process generally is very fast (within a few minutes). The general speed of the process ensures it has the potential of densifying powders with nanosize or nanostructure while avoiding coarsening which accompanies standard densification routes. This has made SPS a good method for preparation of a range of materials with enhanced magnetic,[5] magnetoelectric,[6] piezoelectric,[7] thermoelectric,[8] optical[9] or biomedical[10] properties. SPS is also used for sintering of carbon nanotubes[11] for development of field electron emission electrodes. Functioning of SPS systems is schematically explained in a video link.[12] While the term "spark plasma sintering" is commonly used, the term is misleading since neither a spark nor a plasma is present in the process.[13] It has been experimentally verified that densification is facilitated by the use of a current. SPS can be used as a tool for the creation of functionally graded soft-magnetic materials and it is useful in accelerating the development of magnetic materials.[14] It has been found that this process improves the oxidation resistance [15] and wear resistance[16] of sintered tungsten carbide composites compared to conventional consolidation methods.

A kind of sintering that involves both temperature and pressure

Hybrid heating

By means of a combination of the FAST/SPS method with one or several additional heating systems acting from the outside of the pressing tool systems it's possible to minimize the thermal gradients thus allowing the enhancement of the heating rates at simultaneously optimized homogeneity.[citation needed]

In 2012 the world's largest hybrid SPS-hot press sintering system was set up in Spain[17] and the fabrication of fully dense large ceramic blanks of up to 400mm with this system is in progress within the frame of the FP7 European Project HYMACER - Hybrid sintering and advanced machining of technical ceramics

Spark plasma sintering, also known as plasma pressure compaction (P2C) sintering, equipment are commercially available now and are no longer limited to laboratory research work. Products like body armor, rocket nozzles, carbon fiber composites and several other hybrid materials can be produced in commercial scale using these equipment.[18]

See also

References

  1. ^ "Field-Assisted Sintering Technology / Spark Plasma Sintering: Mechanisms,Materials, and Technology Developments", By O. Guillon et al., Advanced Engineering Materials 2014, DOI: 10.1002/adem.201300409, http://onlinelibrary.wiley.com/doi/10.1002/adem.201300409/epdf
  2. ^ KU Leuven - SPS process modeling
  3. ^ 'sps-p2c
  4. ^ Sairam, K.; Sonber, J.K.; Subramanian, C.; Fotedar, R.K.; Nanekar, P.; Hubli, R.C. (January 2014). "Influence of spark plasma sintering parameters on densification and mechanical properties of boron carbide". International Journal of Refractory Metals and Hard Materials. 42: 185–192. doi:10.1016/j.ijrmhm.2013.09.004.
  5. ^ Aubert, A.; Loyau, V.; Mazaleyrat, F.; LoBue, M. (2017). "Uniaxial anisotropy and enhanced magnetostriction of CoFe2O4 induced by reaction under uniaxial pressure with SPS". Journal of the European Ceramic Society. 37 (9): 3101–3105. arXiv:1803.09656. doi:10.1016/j.jeurceramsoc.2017.03.036. S2CID 118914808.
  6. ^ Aubert, A.; Loyau, V.; Mazaleyrat, F.; LoBue, M. (2017). "Enhancement of the Magnetoelectric Effect in Multiferroic CoFe2O4/PZT Bilayer by Induced Uniaxial Magnetic Anisotropy". IEEE Transactions on Magnetics. 53 (11): 1–5. arXiv:1803.09677. doi:10.1109/TMAG.2017.2696162. S2CID 25427820.
  7. ^ Li et al, Ferroelectric and Piezoelectric Properties of Fine-Grained Na0.5K0.5NbO3 Lead-Free Piezoelectric Ceramics Prepared by Spark Plasma Sintering, Journal of the American Ceramic Society, 89, 2, 706–709, (2006)
  8. ^ Wang; et al. (2006). "High-performance Ag[sub 0.8]Pb[sub 18+x]SbTe[sub 20] thermoelectric bulk materials fabricated by mechanical alloying and spark plasma sintering". Applied Physics Letters. 88 (9): 092104. doi:10.1063/1.2181197.
  9. ^ Kim; et al. (2007). "Spark plasma sintering of transparent alumina". Scripta Materialia. 57 (7): 607–610. doi:10.1016/j.scriptamat.2007.06.009.
  10. ^ Gu; et al. (2002). "Spark plasma sintering of hydroxyapatite powders". Biomaterials. 23 (1): 37–43. doi:10.1016/S0142-9612(01)00076-X. PMID 11762852.
  11. ^ Talemi; et al. (2012). "Fusion of carbon nanotubes for fabrication of field emission cathodes". Carbon. 50 (2): 356–361. doi:10.1016/j.carbon.2011.07.058.
  12. ^ 'SPS-How it Works?
  13. ^ Hulbert, D. M.; Anders, A.; Dudina, D. V.; Andersson, J.; Jiang, D.; Unuvar, C.; Anselmi-Tamburini, U.; Lavernia, E. J.; Mukherjee, A. K. (2008). "The absence of plasma in spark plasma sintering". J. Appl. Phys. 104 (3): 033305–7. Bibcode:2008JAP...104c3305H. doi:10.1063/1.2963701. S2CID 54726651.
  14. ^ V. Chaudhary, L. P. Tan, V. K. Sharma, R. V. Ramanujan, Accelerated study of magnetic Fe-Co-Ni alloys through compositionally graded spark plasma sintered samples, Journal of Alloys and Compounds, 869, 159318 (2021), https://doi.org/10.1016/j.jallcom.2021.159318
  15. ^ Karimi, Hadi; Hadi, Morteza; Ebrahimzadeh, Iman; Farhang, Mohammad Reza; Sadeghi, Mohsen (2018-10-01). "High-temperature oxidation behaviour of WC-FeAl composite fabricated by spark plasma sintering". Ceramics International. 44 (14): 17147–17153. doi:10.1016/j.ceramint.2018.06.168. ISSN 0272-8842. S2CID 140057751.
  16. ^ Karimi, Hadi; Hadi, Morteza (2020-08-01). "Effect of sintering techniques on the structure and dry sliding wear behavior of WC-FeAl composite". Ceramics International. 46 (11, Part B): 18487–18497. doi:10.1016/j.ceramint.2020.04.154. ISSN 0272-8842. S2CID 219077175.
  17. ^ CINN-CSIC: Hybrid SPS-HP - Photo Gallery
  18. ^ plasma pressure compaction
Retrieved from "https://en.wikipedia.org/w/index.php?title=Spark_plasma_sintering&oldid=1131276683"