Jump to content

Nord 2.451 to 2.631

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by Citation bot (talk | contribs) at 03:40, 13 June 2023 (Removed parameters. | Use this bot. Report bugs. | Suggested by Spinixster | Category:Steam locomotive stubs | #UCB_Category 228/288). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Nord 2.451 to 2.631
Drawing of Nord 2.552 to 2.631
Type and origin
Power typeSteam
Build date1867–1883
Total produced181
Specifications
Configuration:
 • Whyte0-4-2
 • UICB1 n2
Gauge1,435 mm (4 ft 8+12 in)
Driver dia.1,830 mm (6 ft 0 in)
Wheelbase4.40 m (14 ft 5+14 in)
Length8.18 m (26 ft 10 in)
Adhesive weight23–24 t (50,700–52,900 lb)
Loco weight31–32 t (68,300–70,500 lb)
Fuel typeCoal
Firebox:
 • TypeCrampton
 • Grate area1.53–1.63 m2 (16.5–17.5 sq ft)
Boiler pressure8.5–10 kg/cm2 (0.834–0.981 MPa; 121–142 psi)
Heating surface93–134 m2 (1,000–1,440 sq ft)
CylindersTwo, inside
Cylinder size420 mm × 560 mm (16+916 in × 22+116 in)
Valve gearStephenson
Career
OperatorsChemins de Fer du Nord
NumbersNord: 2.451 – 2.631

Nord 2.451 to 2.631 were 0-4-2 locomotives for mixed traffic of the Chemins de Fer du Nord. The machines were retired from service from 1909 to 1923.[1]

Construction history

[edit]

The locomotive design was first put into service at the Chemins de Fer du Nord in 1867 and originated from a similar design which was built by Ernest Goüin in 1851 for the Lyon railways and reproduced in large numbers by the Chemins de fer de l'Est, Chemins de fer de l'Ouest and Chemins de fer de Paris à Lyon et à la Méditerranée.[2][3]

The main difference to these older types was the arrangement of the rear axle, which was supported from the outside in order to leave as much space as possible for the firebox between the wheels.[2] The rest of the frame remained inside the driving wheels. The Stephenson valve gear and the cylinders were on the inside of the locomotive frame. The firebox was of the Crampton type, the boiler barrel consisted of three shells, with the middle one carrying the dome.[2] A Crampton regulator sat behind the chimney, with the steam pipes running down on the outside to the steam chest. The boiler pressure was 8.5 kg/cm2 (0.834 MPa; 121 psi) on the first and 10 and 11 kg/cm2 (0.981 and 1.08 MPa; 142 and 156 psi) on the later machines, with the earlier series later also receiving boilers for 10 kg/cm2 (0.981 MPa; 142 psi).[1]

The Nord 2.451 to 2.631 locomotives were built by Société J. F. Cail & Cie and Fives-Lille from 1867 to 1883.[1]

Year Qty. Nord No. Manufacturer
1867 36 2.451–2.486 Société J. F. Cail & Cie
1870–1875 65 2.487–2.551 Fives-Lille
1882–1883 54 2.552–2.605 Société J. F. Cail & Cie
1882–1883 26 2.606–2.631 Fives-Lille

The locomotives were coupled with 2 axle tenders, holding 7–8 m3 (247–283 cu ft) of water and 3 t (6,610 lb) of coal, and weighing 20–22 t (44,100–48,500 lb).[1]

References

[edit]
  1. ^ a b c d Vilain (1977), pp. 135–136, 148.
  2. ^ a b c Deghilage (1882), pp. 254–258.
  3. ^ Demoulin (1898), pp. 71–72.

Bibliography

[edit]
  • Vilain, Lucien-Maurice (1977). Dix décennies de locomotives sur le réseau du Nord : 1845-1948 (in French). Editions Picador. ISBN 2-902653-01-8.
  • Deghilage (4 October 1882). "Note sur les locomotives construites pour les Chemins de fer français, De 1878 à 1881 - Première partie". Revue générale des chemins de fer (in French). 5, 2e Semestre. Paris: P. Vicq-Dunod: 237–265. OCLC 6536095.
  • Demoulin, Maurice (1898). Traité pratique de la machine locomotive (in French). Vol. 1. Baudry et Cie.
[edit]