Tara Labs
This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
[1]TARA (The Absolute Reference Audio) Labs is a manufacturer of high-end audio cables from Medford, Oregon. It is currently led by president Merrill Bergs. The trademark of Tara Labs is their use of solid wire.
Company type | Private |
---|---|
Industry | Cable manufacturers |
Founded | 1986 |
Founder | Matthew Bond & Merrill Bergs |
Headquarters | , |
Products | Interconnects, Speaker Cables, Subwoofer Cables |
Website | taralabs |
History
TARA Labs was established in 1984. As early as the mid-1970s and early 1980s, TARA Labs had experimented with solid core conductors of different diameters. It was hypothesized that an 'optimum diameter' of 18 AWG (American Wire Gage) or 1 millimeter was ideal for audio frequencies because there was minimal high-frequency attenuation caused by the principles known as the Skin Effect.[2] Founders: Matthew Bond & Merrill Bergs work was corroborated by research work from the NBS or National Bureau of Standards in the 1930s and confirmed later by Stereophile in July 1988, in a table presented as the DC to AC resistance ratio versus frequency in wires of different diameters.[3] TARA Labs is credited with the invention of solid-core wires for audio use because his work predates Dennis Morecroft (1984) and any of the early solid-core wires developed for use in audio in England at the time.[4]
Their first commercial speaker cables were designed in 1984, the Phase II speaker cable, which was a solid core design.[5] Later, in 1990, TARA Labs introduced the world’s first cable to have a floating conductor unterminated at one end that would allow for an increased high-frequency bandwidth to be coupled to the signal-carrying conductors (US patent No. 5033091). Later, a control device inside a box fitted to the cable (The Temporal Continuum) allowed the user to adjust the amount of high-frequency energy to be heard.
TARA Labs introduced Rectangular Solid Core cables in 1992.[5] These cables employed solid core conductors with a rectangular cross-section and can be made in specific proportions (width and height). This affects the tuning of the frequency response of a conductor as compared to around a conductor of the same size or DC resistance.[6]
The cables employed solid core conductors with a rectangular cross-section.[6][7] Both the Gen2 conductor and the smaller Gen3 conductor are said to be Eight-Nines™ pure copper, which is 99.999999% pure. TARA Labs’ trademarks for this technology are 8N™ and SA-OF8N® (Super Annealed – Oxygen-Free 8 Nines copper). According to Bond, the term ‘annealing’ refers to the method whereby a conductor can be made softer and more conductive.[8]
In 1999 TARA Labs introduced the "Zero" interconnect with a Vacuum Dielectric Insulation system.[9][10]
In 2014, TARA Labs introduced a new line of high-end cables called The Evolution Series.[11]
References
- ^ "Trafic SMS, 2003-2004". dx.doi.org. doi:10.1787/535426710760. Retrieved 2022-03-19.
- ^ "Cable and Interconnect Construction".
- ^ Stereophile Magazine, July 1988, p.106
- ^ "TARA labs Space & Time Phase II" (PDF). Stereophile. Vol. 11, no. 7. stereophile.com. July 1988. p. 117.
- ^ a b "The Cable Company - Tara Labs". www.thecableco.com. Retrieved 2017-08-10.
- ^ a b "TARA Labs Rectangular Solid Core Series".
- ^ "Home". taralabs.com.
- ^ "Making Sense of….Gen 3 Conductors". www.taralabs.com. Retrieved 2017-08-10.
- ^ "Audio Cables - Digital - RCA - Subwoofer - Biwire - Phono".
- ^ "TARA Labs: The Zero Interconnect and Omega Speaker Cable".
- ^ "TARA LABS EVOLUTION SERIES CABLES NEW GENERATION 3 RECTANGULAR CONDUCTOR". www.monoandstereo.com. Retrieved 2017-08-10.