Jump to content

Tschanz drive

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by Sauer202 (talk | contribs) at 16:37, 21 June 2023. The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Tschanz single axle drive system (US patent drawing)

The Tschanz drive or Oerlikon single-axle drive is a fully sprung single-axle drive for electric locomotives [1] named after its inventor Otto Tschanz or after Maschinenfabrik Oerlikon. The drive was not widely used because its competitor, the Buchli drive, was cheaper and lighter.

Construction

[edit]

The Tschanz drive is a fully sprung drive, which means that the motors are housed in the sprung part of the locomotive and are thus less exposed to shocks from the rails. Also, the shocks from the wheelsets to the rail are reduced because there is less unsprung weight on them.

The traction motor is firmly mounted in the locomotive frame and drives through a single-stage gearbox to a gear that is located to one side of the wheel. The power transmission from this gear to the axle is done with a cardan shaft which has universal joints at both ends and passes through a hollow axle.

Use

[edit]

Rolling stock on which the Tschanz drive was used include:

Patents

[edit]
  • Drive device on railway vehicles with motors firmly mounted on the spring-loaded frame, (1916).[2]
  • Motor mechanism for railway vehicles, with electric motors rigidly fixed to the frame mounted on suspension springs, (1917).[3]
  • Driving mechanism for railway-vehicles with electric motors rigidly mounted on spring-supported frames, (1919).[4]

See also

[edit]

References

[edit]
  1. ^ Google books
  2. ^ CH 72442, Tschanz, Otto, "Antriebsvorrichtung an Eisenbahnfahrzeugen mit am abgefederten Rahmen fest gelagerten Motoren [Drive device on railway vehicles with motors firmly mounted on the spring-loaded frame]", published 1916-05-16 
  3. ^ FR 484430, Tschanz, Otto, "Mécanisme moteur pour véhicules de chemins de fer, avec moteurs électriques rigidement fixés au châssis monté sur ressorts de suspension [Motor mechanism for railway vehicles, with electric motors rigidly fixed to the frame mounted on suspension springs]", published 1917-10-03 
  4. ^ US 1311928, Tschanz, Otto, "Driving mechanism for railway-vehicles with electric motors rigidly mounted on spring-supported frames", published 1919-08-05 

Further reading

[edit]
  • K. Sachs: Elektrische Vollbahnlokomotiven. Julius Springer, Berlin 1928, S. 308–309 (Fussnote).
  • Elektrifizierung der Gotthardbahn. In: Schweizerische Bauzeitung. Band 69/70, Nr. 7, 1917, S. 83, doi:10.5169/seals-33931.