Jump to content

.475 A&M Magnum

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Entranced98 (talk | contribs) at 12:00, 5 September 2023 (Adding local short description: "Rifle cartridge", overriding Wikidata description "cartridge"). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

.475 A&M Magnum
TypeRifle
Place of originUnited States
Production history
Designed1958-9
Specifications
Parent case.378 Weatherby Magnum
Case typebelted bottleneck
Bullet diameter.475 in (12.1 mm)
Neck diameter.502 in (12.8 mm)
Shoulder diameter.560 in (14.2 mm)
Base diameter.584 in (14.8 mm)
Rim diameter.533 in (13.5 mm)
Case length2.90 in (74 mm)
Overall length3.75 in (95 mm)
Rifling twist1:14 in (360 mm)
Primer typeBoxer large rifle
Ballistic performance
Bullet mass/type Velocity Energy
400 gr (26 g) 3,227 ft/s (984 m/s) 9,034 ft⋅lbf (12,248 J)
500 gr (32 g) 2,980 ft/s (910 m/s) 9,900 ft⋅lbf (13,400 J)
600 gr (39 g) 2,500 ft/s (760 m/s) 8,040 ft⋅lbf (10,900 J)
Source(s): Barnes & Amber

The .475 A&M Magnum is a rifle cartridge developed in the United States. At the time of its development it was considered the most powerful sporting rifle cartridge ever developed.[1] However, as the .475 A&M Magnum was a wildcat cartridge, the .460 Weatherby Magnum continued to be the most powerful commercial sporting cartridge available.

Description

The cartridge and rifle were designed by the Atkinson & Marquart Rifle Co. of Prescott, Arizona, by necking up the then new .460 Weatherby Magnum to accept a .475 in (12.1 mm) diameter bullet. Fred N. Barnes, the founder of Barnes Bullets for whom the first rifle chambered for this cartridge was made, supplied the bullets. According to anecdotes, Fred Barnes gathered a group of people to demonstrate the rifle. The rifle was fired at the base of a small tree which was uprooted while Fred Barnes who had been shooting from a crouched position on a gravel bed had slid a few feet and ended on his back due to the recoil.[1]

The .475 A&M Magnum was never available commercially, and was only Barnes Bullets and Custom Brass and Bullets provided bullet for the cartridge. Only a small number of rifles have been chambered for this cartridge. Brass is easily fireformed using .460 Weatherby Magnum brass. Dies are available from Custom Brass and Bullets.

See also

References

  1. ^ a b Barnes, Frank C., ed. by John T. Amber. Cartridges of the World (Northfield, IL: DBI Books, 1972), p.142.

Notes

  • Barnes, Frank C., ed. by John T. Amber. ".475 A&M Magnum", in Cartridges of the World, pp. 142–3. Northfield, IL: DBI Books, 1972. ISBN 0-695-80326-3.