Jump to content

Shaft passer

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by UrielAcosta (talk | contribs) at 12:55, 14 September 2023 (Removed extraordinary claim (that a device considered impossible has actually been created) based only on an ad on a commercial site for a device which does not actually claim it is a shaft-passer. See WP:V (& also WP:DATED for why "recently" shouldn't be use in Wikipedia articles). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Wheel with shaft passers
Detail of a shaft passer

A shaft passer is a hypothetical device that allows a spoked wheel to rotate despite having a shaft (such as the axle of another wheel) passing between its spokes. The device is usually mentioned as a joke between nerds, in the manner of a fool's errand, since there is no evidence of one ever having been constructed.

One of the earliest printed references to these devices was made by Richard Feynman, who was told by a colleague at Frankford Arsenal in Philadelphia that the cable-passing version of the device had been used during both world wars on German naval mine mooring cables, to prevent the mines from being caught by British cables swept along the sea bottom.[1]

The device was supposed to work using a spoked, rimless wheel that allows cables to pass through as it rotates. The ends of the spokes are widened, and the cable is held together by a short curved sleeve through which these spoke ends slide.[2]

  • Éviteur d'axe [Shaft passer] (in French), Dr Goulu, Dec 29, 2005, ISBN 9782738107718, with diagram of the device.
  • Heron, Pneumatica, no. 78
  • Heron's Horse

References

  1. ^ Feynman, Richard (1992), Surely You're Joking, Mr. Feynman!, Vintage Books, p. 101, ISBN 978-0-099-17331-1
  2. ^ Francis, Devon (1946), "Their war is not over", Popular Science (January): 74