Springfield model 1870

Springfield Model 1870
Type	Breech-loading rifle
Place of origin	United States
Service history
In service	1870–1873
Used by	United States
Wars	American Indian Wars
Production history
Designer	Erskine S. Allin
Designed	1870
Manufacturer	Springfield Armory
Produced	1870–1872
No. built	c. 11,350
Variants	Carbine
Specifications
Length	52 in (1,300 mm)
Barrel length	32.6 in (830 mm)
Cartridge	.50-70-450
Action	Trapdoor
Rate of fire	User dependent; usually 8 to 10 rounds per minute
Feed system	Breech-loading
Sights	Iron sights

Springfield Model 1870 (center)

The Springfield Model 1870 was one of the rifles which used the trapdoor breechblock design developed by Erskine S. Allin. The Model 1870 was a minor improvement to the Springfield Model 1868, and retained most of the Model 1868 rifle features.

Note: Springfield Model 1870 may also refer to the Springfield rolling-block U.S. Navy rifle, employing the Remington Arms Company rolling-block design, and manufactured under a royalty agreement with Remington, for use by the United States Navy as a shipboard small arm.

Variants

The trapdoor Springfields had originally been designed as an inexpensive method of converting Springfield Model 1861 and Springfield Model 1863 rifled muskets into breech-loading rifles, which dramatically improved their rate of fire from about 2 to 3 shots per minute to about 8 to 10 shots per minute.

The original trapdoor Springfields had replaced only the firing mechanism, and had used a barrel liner to reduce the caliber from .58 to .50. This barrel liner proved to be unreliable in the field, and later trapdoor Springfields, like the Model 1870, abandoned the barrel liner method and used newly manufactured barrels instead.

There were two versions of the Model 1870, which differed slightly from each other. The first version was produced in 1870 and 1871. The rear sight was improved, and the receiver was shortened to create the Model 1870 receiver. The rear sight on the first Model 1870 was almost against the receiver. 1,000 of these rifles were manufactured.

The second version was produced in 1872 and 1873. In this version the rear sight was moved up so that it was about half an inch away from the receiver. This version also featured a double shouldered cleaning rod, which differed from the first Model 1870 that had used the Model 1868 rifle's cleaning rod. The second version Model 1870 also had a long high arch on the underside of the breechblock, which differed from the first version which had a shorter arch identical to the Model 1868. 10,000 of the second version were manufactured.

A shorter carbine version was also produced in 1871. Approximately 350 of these were manufactured.

The Model 1870, the carbine version as well as both versions of the rifle, used the .50-70-450 cartridge.

Notable uses

Wild Bill Hickok, the famous gunfighter, used a variant of the Model 1870. The "Hickok rifle" has a 29.625-inch (75.25 cm) barrel, which is longer than the carbine version's barrel and shorter than the rifle version's barrel, and also has a Kentucky rifle style sloped butt. The trapdoor mechanism is stamped with the year 1870, and the lockplate is stamped with the year 1863, indicating that this rifle was originally produced as a Model 1863 rifled musket and was later converted as part of the Model 1870 manufacturing. The name "J. B. Hickok" was carved into the stock using a sharp knife. Hickok was buried with this rifle in 1876. However, when he was reburied in Mount Moriah in 1879, someone removed the rifle from his coffin.

See also

• Springfield rifle