Jump to content

Four-wire terminating set

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Srleffler (talk | contribs) at 08:23, 28 November 2014 ({{telephony-stub}}). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A four-wire terminating set (4WTS) is a balanced transformer used to perform a conversion between four-wire and two-wire operation in telecommunication systems.

For example, a 4-wire circuit may, by means of a 4-wire terminating set, be connected to a 2-wire telephone set. Also, a pair of 4-wire terminating sets may be used to introduce an intermediate 4-wire circuit into a 2-wire circuit, in which loop repeaters may be situated to amplify signals in each direction without positive feedback and oscillation.

The 4WTS differs from a simple hybrid coil in being equipped to adjust its impedance to maximize return loss.

Four-wire terminating sets were largely supplanted by resistance hybrids in the late 20th century.

References

Public Domain This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22. (in support of MIL-STD-188).