Jump to content

Waterladder pump

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Leyo (talk | contribs) at 12:47, 9 February 2015 (adding missing space after reference). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A waterladder pump

A waterladder pump, water ladder, dragon spine, dragon wheel or rahad is a low lift pump which is composed of sprockets that move a chain with paddles over a trough. Water is pumped as the paddles push the water up the trough.

Application

The water ladder, as many low lift pumps, is commonly used for irrigation purposes and for drainage of lands. It is currently still used by farmers in south-east Asia.

Advantages

The water ladder was built as an alternative to the paddle wheel to get around the problem that to lift water to a greater height, a bigger wheel is needed. [1] Despite the emergence of new pumps that operate on other principles, the water ladder remains an important tool as some of its other benefits are that they can be built and repaired easily at a very low cost. This is possible as all the components can be built from local resources, such as wood; which can be obtained and shaped into the desired form easily.

Disadvantages

As mentioned before, the pump only allows the lifting of water over a small height. This makes it unsuitable to water drainage or irrigation over larger height differences or many other pumping applications besides drainage and irrigation.

See also

References