Jump to content

Edel Be All

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Ahunt (talk | contribs) at 18:46, 4 May 2016 (initial entry). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Be All
Role Paraglider
National origin South Korea
Manufacturer Edel Paragliders
Introduction 2003
Status Production completed
Produced mid-2000s

The Edel Be All is a South Korean single-place, paraglider that was designed and produced by Edel Paragliders of Gwangju. It is now out of production.[1]

Design and development

The Be All was designed as a beginner's glider and introduced in 2003. The models are each named for their relative size.[1]

Variants

Be All S
Small-sized model for lighter pilots. It has a wing area of 26.03 m2 (280.2 sq ft), 37 cells and the aspect ratio is 4.8:1. The pilot weight range is 65 to 90 kg (143 to 198 lb). The glider model is DHV 1 certified.[1]
Be All M
Mid-sized model for medium-weight pilots. It has a wing area of 28.60 m2 (307.8 sq ft), 37 cells and the aspect ratio is 4.8:1. The pilot weight range is 80 to 105 kg (176 to 231 lb). The glider model is DHV 1 certified.[1]
Be All L
Large-sized model for heavier pilots. It has a wing area of 33.05 m2 (355.7 sq ft), 37 cells and the aspect ratio is 4.8:1. The pilot weight range is 100 to 130 kg (220 to 287 lb). The glider model is DHV 1 certified.[1]

Specifications (Be All L)

Data from Bertrand[1]

General characteristics

  • Crew: one
  • Wing area: 33.05 m2 (355.7 sq ft)
  • Aspect ratio: 4.8:1

References

  1. ^ a b c d e f Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 15. Pagefast Ltd, Lancaster OK, 2003. ISSN 1368-485X