Jump to content

Ceinture 5001 to 5012

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Iain Bell (talk | contribs) at 22:03, 1 August 2017 (added Category:Corpet-Louvet locomotives using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Ceinture 5001–5012
Nord 5.301 – 5.312
SNCF 2-151.TA
Type and origin
Power typeSteam
DesignerHenschel & Sohn and Corpet-Louvet
BuilderCorpet-Louvet
Serial number1749, 1774–1783
Build date1928 (1), 1930 (11)
Total produced12
Specifications
Configuration:
 • Whyte2-10-2T
 • UIC1′E1′ h2t
Gauge1,435 mm (4 ft 8+12 in)
Leading dia.800 mm (31+12 in)
Driver dia.1,350 mm (4 ft 5+18 in)
Trailing dia.800 mm (31+12 in)
Length15.530 metres (50 ft 11+38 in)
Loco weight
  • Empty: 90.7 tonnes (89.3 long tons; 100.0 short tons)
  • Loaded 114.8 tonnes (113.0 long tons; 126.5 short tons)
Firebox:
 • Grate area3.55 m2 (38.2 sq ft)
Boiler pressure12 kg/cm2 (1.18 MPa; 171 psi)
Feedwater heaterACFI
Heating surface167 m2 (1,800 sq ft)
Superheater:
 • Type5P4 type
 • Heating area89 m2 (960 sq ft)
CylindersTwo, outside
Cylinder size630 mm × 660 mm (24+1316 in × 26 in)
Performance figures
Maximum speed70 km/h (43 mph)
Power output1,300 CV (960 kW; 1,300 hp)
Career
Operators
  • Ceinture
  • Nord
  • SNCF
Numbers
  • Ceinture: 5001–5012
  • Nord: 5.301 – 5.312
  • SNCF: 2-151.TA.1 – 2-151.TA.12
Retired1962–1965
Current ownerall scrapped

Ceinture 5001 to 5012 were a class of 2-10-2T tank locomotives of the Syndicat d'Exploitation des Chemins de fer de Ceinture de Paris. They were used for hauling freight trains on the Grande Ceinture line in Paris, and later the Région Nord.

The locomotives were designed jointly by the firm of Corpet-Louvet and Henschel & Sohn, and were based on the Prussian T 20.[1] They were delivered to the Ceinture between 1928 and 1930, who numbered them 5001 to 5012.

In 1934, at the dissolution of the Syndicat, they transferred to the Chemins de fer du Nord who renumbered them 5.301 to 5.312.

In 1938, at the creation of the SNCF, the became 2-151.TA.1 to 2-151.TA.12. The SNCF ordered a further 22 of this type, but with the higher boiler pressure of 14 kg/cm2 (1.37 MPa; 199 psi), as the 151.TQ type.[1]

They were retired between 1962 and 1965. None have been preserved.

Table of retirements
Year Quantity in
service at
start of year
Quantity
withdrawn
Fleet numbers
1962 12 3 151.TA.2, 3, 10
1963 9 4 151.TA.1, 4, 5, 6
1964 5 3 151.TA.7, 9, 12
1965 2 2 151.TA.8, 11

References

  1. ^ a b Davies 1997, p. 158.
  • Davies, John (January 1997). Chemins de fer du Nord Locomotive List 1842–1938. Sunnybank, Queensland: Dr. John Davies. p. 158. ISBN 0-646-30938-2.

See also