Jump to content

VS-SATM1 mine

Edit links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Shadowcaster (talk | contribs) at 02:45, 1 March 2019 (→References). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The VS-SATM1 is an Italian scatterable anti-tank landmine that was produced by Valsella Meccanotecnica SpA. The mine can be scattered by a GRILLO-128 man-portable single-tube launcher system or a VS-MDH helicopter based system. The mine has six pop-out fins which slow its descent and improve the dispersion characteristics.

The mine uses an electronic fuze with a ten-minute arming delay and a programmable life of between one hour and one year, which is set in one-hour increments. After the programmable life expires, the mine either self-destructs or self-neutralizes. The fuze is an electronic full-width device that probably uses magnetic and seismic sensors. The mine can also function underwater. The fuze contains an integral anti-handling device to hinder deminers.

The mine's warhead is a shaped charge, optimized to produce maximum spalling behind armour — it can blast a 45-millimeter-diameter hole through a 100-millimeter-thick armour plate.

Specifications

  • Diameter: 128 mm
  • Height: 105 mm
  • Weight: 2.5 kg
  • Explosive content: 0.8 kg

References

Retrieved from "https://en.wikipedia.org/w/index.php?title=VS-SATM1_mine&oldid=885604594"