Jump to content

Smoke-developed index

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Monkbot (talk | contribs) at 19:47, 30 September 2019 (→‎top: Task 16: replaced (1×) / removed (0×) deprecated |dead-url= and |deadurl= with |url-status=;). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Smoke-developed index (abbreviated SDI) is a measure of the concentration of smoke a material emits as it burns.[1] Like the Flame Spread Index, it is based on an arbitrary scale in which asbestos-cement board has a value of 0, and red oak wood has 100. The SDI is measured using a horizontal test specimen, according to the Steiner tunnel test protocol.

The ASTM standard E84 defines a standard test method for surface flame spread and smoke density measurements.[2] A smoke-developed index of less than 450 is required by IBC section 803.1 at interior walls and ceilings for all surface materials except trim.

See also

References

  1. ^ "Archived copy" (PDF). Archived from the original (PDF) on 2007-09-23. Retrieved 2008-11-16.{{cite web}}: CS1 maint: archived copy as title (link)
  2. ^ http://www.astm.org/Standards/E84.htm
Retrieved from "https://en.wikipedia.org/w/index.php?title=Smoke-developed_index&oldid=918897185"