Honda VT250
This article needs additional citations for verification. (November 2009) |
![]() Honda VT250 Spada | |
Manufacturer | Honda |
---|---|
Also called | Spada MC20 |
Predecessor | VT250F |
Successor | VTR250 |
Class | Sport bike |
Engine | Liquid-cooled 249 cc (15.2 cu in) 4 valves per cylinder V-twin |
Power | 40 hp (30 kW) @ 12000 rpm [1] |
Ignition type | Electric start |
Transmission | 6-speed manual, chain drive |
Frame type | Aluminum |
Suspension | Front tyre: 110/80R17 Rear tyre: 140/70R17 |
Brakes | Front: single disc Rear: single disc |
Wheelbase | 1,380 mm (54 in) |
Seat height | 740 mm (29 in) |
Fuel capacity | 11 L (2.4 imp gal; 2.9 US gal) |
The VT250 or Spada MC20 is a Honda motorcycle built between late 1988 and the end of 1989.
The VT250 Spada used Nissin brakes, Enkei wheels and a Showa rear-shock. The model was principally marketed in Asia, Australia and New Zealand. Following the VT250 Spada, the Honda VTR250 was produced, which had a trellis frame in place of the cast aluminium frame.
Predecessor
The VT250F is a semi-faired, sport bike first produced by Honda in 1982.
The motorcycle had a DOHC 4-valve-per-cylinder, 90-degree water-cooled V-twin engine, which significantly reduced primary vibration when compared to inline twin engines used on similar machines. The V-twin engine also allowed the motorcycle to have a low centre of gravity and a low seat height.
The front brake was a single inboard ventilated disc that was developed to improve brake performance and feel. This was only seen on Honda models for a few years, before a switch to sintered metal brake pads with the more traditional disc/caliper arrangement. Other features included a hydraulic clutch, Comstar wheels with tubeless tyres, TRAC anti-dive front forks and Pro-Link rear suspension. Engine coolant passed through one of the frame tubes. The early UK specification model had built-in front fairing indicators, and optional radiator side-cowls and belly pan. Following the VT250F, the VT250 Spada and VTR250 were produced.
Successor
The Honda VTR250 is a 90° V-twin motorcycle produced by Honda that has so far had one major revision. The original VTR250 was a faired model sold only in the USA and Canada from 1988 to 1990. The current model VTR250 is a naked bike, produced from 1997 to the present, available only in the Asia-Pacific region, and for 2009, Europe.
The Honda Interceptor VTR250 was sold only in the United States from 1988 to 1990, with moderate changes occurring over the three model years. With a 249 cc (15.2 cu in) four-stroke liquid-cooled DOHC V-twin engine and a six-speed transmission, VTR250 was the smallest of Honda's Interceptor line of motorcycles.
The 1990 model had a 17-inch front wheel and the front disc brakes were external.
Specifications
All specifications are manufacturer claimed as per specific model owners manuals and workshop service manuals, except as stated,
Year | 1982-83 | 1984-85 | 1985 | 1986 | 1987-89 | 1989 | 1997-99 | 2000-2002 | 2003-2008 | 2009- |
---|---|---|---|---|---|---|---|---|---|---|
Model | VT250-FII (VT250F) | VT250-FII (VT250Z H/J/K) MC15 |
VT 250-FII (Integra) | VT250F special edition/F2H (VTR250 Interceptor) MC15 |
Spada VT250L MC20 |
VTR250 (VTR250W) MC33 |
VTR250 (VTR250Y) MC33 |
VTR250 (VTR2503) MC33 |
VTR250 (EFI) MC33 | |
Engine Type / Configuration |
Liquid cooled, 4-stroke, petrol, DOHC, V-Twin | 4-stroke - 8-valve Liquid-cooled DOHC 90°V-twin |
4-stroke - 8-valve Liquid-cooled EFI DOHC 90°V-twin | |||||||
Body type | Fully faired & naked | Semi-naked & naked | Fully faired | Naked | ||||||
Displacement | 248 cc (15.1 cu in) | 249 cc (15.2 cu in) | 250 cc (15 cu in) | |||||||
Bore and Stroke | 60 mm × 44 mm (2.4 in × 1.7 in) | 60 mm × 44.2 mm (2.36 in × 1.74 in) | 60 mm × 44.1 mm (2.36 in × 1.74 in) | 60 mm × 44 mm (2.4 in × 1.7 in) | 60 mm × 44.2 mm (2.36 in × 1.74 in) | |||||
No. of cylinders | 2 (V-twin) | |||||||||
No. of valves | 8 (4 per cylinder) | |||||||||
Compression Ratio | 11.0:1 | |||||||||
Ignition / Starting | Transistorized / electric | Full transistor / electric firing | Computer-controlled fully transistorised with electronic advance / electric | |||||||
Fuel delivery | 2x 32mm Keihin carburettors | 2x 32mm Keihin VD10F | 2x 32mm VD10 carburettors | Honda PGM-FI fuel injection system | ||||||
Transmission | 6-Speed, constant mesh, chain and sprockets final drive | 5-Speed, constant mesh, chain and sprockets final drive | ||||||||
Rake / trail | 26°70' / 91 mm (3.6 in) | 26°30' / 97 mm (3.8 in) | 26°05' / 100 mm (3.9 in) | 25° / 96 mm (3.8 in) | 25°30' / 98 mm (3.9 in) | 25°30' / 96 mm (3.8 in) | ||||
Front suspension | Air-assisted telescopic | Air assisted Telescopic with anti- dive adjustment |
Showa 35mm Telescopic, 130mm travel |
37mm telescopic, 120mm travel |
Showa 41mm telescopic | Showa 41mm telescopic | ||||
Rear suspension | Pro-link air assisted monoshock | Monoshock, 100mm travel | Monoshock with 7-step preload adjustment |
Monoshock with preload adjustment | Monoshock with preload adjustment. | |||||
Front brakes | in-board disc brake | Single disk, 2-piston calliper |
drum | Single disk, 2-piston calliper | 296mm single disc, 2-piston caliper | |||||
Rear brakes | drum | single disk | ||||||||
Front tyre | 100/90-16 54S | 100/80-17 52S | 110/70-17 54H | |||||||
Rear tyre | 110/80-18 58S | 120/80-17 61S | 140/70-17 66S | 140/70-17 66H | ||||||
Fuel capacity (total) | 12 L (2.6 imp gal; 3.2 US gal) | 14 L (3.1 imp gal; 3.7 US gal) | 13 L (2.9 imp gal; 3.4 US gal) | 11 L (2.4 imp gal; 2.9 US gal) | 13 L (2.9 imp gal; 3.4 US gal) | 12 L (2.6 imp gal; 3.2 US gal) | ||||
Oil capacity | 2.5 L (0.55 imp gal; 0.66 US gal) | 2.4 L (0.53 imp gal; 0.63 US gal) | ||||||||
Length | 2,027 mm (79.8 in) | 2,028 mm (79.8 in) | 2,030 mm (80 in) | 2,010 mm (79 in) | 2,040 mm (80 in) | 2,080 mm (82 in) | ||||
Width | 750 mm (30 in) | 730 mm (29 in) | 715 mm (28.1 in) | 720 mm (28 in) | 715 mm (28.1 in) | |||||
Height | 1,190 mm (47 in) | 1,185 mm (46.7 in) | 1,140 mm (45 in) | 1,020 mm (40 in) | 1,050 mm (41 in) | 1,055 mm (41.5 in) | ||||
Wheelbase | 1,385 mm (54.5 in) | 1,370 mm (54 in) | 1,380 mm (54 in) | 1,410 mm (56 in) | 1,405 mm (55.3 in) | |||||
Seat height | 760 mm (30 in) | |||||||||
Ground clearance | 140 mm (5.5 in) | 150 mm (5.9 in) | 170 mm (6.7 in) | |||||||
Turning ratio | 2.7 m (8 ft 10 in) |
Notes
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- ^ Honda Spada Owner's Manual, 1989