This is an old revision of this page, as edited by Trevayne08(talk | contribs) at 06:43, 25 March 2020(→General: - by tradition, an unspoken rule in the IT world is that the plural of "baud" is "baud" (there is no "bauds"). That's just how it is.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Revision as of 06:43, 25 March 2020 by Trevayne08(talk | contribs)(→General: - by tradition, an unspoken rule in the IT world is that the plural of "baud" is "baud" (there is no "bauds"). That's just how it is.)
An IBM 1052 used as the console typewriter on a System/360 model 30.
IBM 1050 Data Communications System is a computer terminal subsystem to send data to and receive data from another 1050 subsystem or IBM computer in the IBM 1400, IBM 7000 or System/360 series. It first became available in 1963 and was used widely during the 1960s. The 1052 Printer-Keyboard was also the basis for the 1052-7 console Printer-Keyboard used on small and medium S/360 processors.
General
IBM 1050 Data Communications System was first introduced in 1963. The printer used the same removable typing element and mechanism as the IBM Selectric typewriter. The 1050 system could include the following devices:
IBM 1051 Central Control Unit
IBM 1052 Printer-Keyboard
IBM 1052 printer-keyboardIBM 1053 Console Printer
IBM 1054 Paper Tape Reader
IBM 1055 Paper Tape Punch
IBM 1056 Card Reader
IBM 1057 Card punch
IBM 1058 Printing Card punch
IBM 1092/1093 Programmed Keyboards
Communication was done serially, half-duplex, at 75 or 150 bits per second. A modem, such as IBM Line Adapter, was needed for connection to a communication line. The IBM 1050 featured multipoint asynchronous communication (Start Stop protocol), and improved error checking (LRC and VRC), with speed up to 14.8 characters per second (134 baud), compared to the teleprinter's 10 cps.[1] One IBM 1051 and another device were required per subsystem.
